AIM Integration CAN Mapping - Revision history

Sbarton at 19:27, 5 January 2021

2021-01-05T19:27:57Z

← Older revision		Revision as of 19:27, 5 January 2021
Line 1:		Line 1:
	'''AIM Data to Race Capture Pro Integration'''		'''AIM Data to Race Capture Pro Integration'''

			- Written by [https://www.facebook.com/scott.barton.76 Scott Barton] of [https://www.facebook.com/ProFormanceCoachingcom ProFormance Coaching]

	==='''1) Configure your AIM channels/sensors in [http://aimsports.com/eng/download/software.htm AIM Race Studio] → Channels'''===		==='''1) Configure your AIM channels/sensors in [http://aimsports.com/eng/download/software.htm AIM Race Studio] → Channels'''===

Sbarton: /* 3) Click AIM SmartyCam Functions settings to setup the channels you want exported to RCP */

2020-03-03T23:17:41Z

3) Click AIM SmartyCam Functions settings to setup the channels you want exported to RCP

← Older revision		Revision as of 23:17, 3 March 2020
Line 11:		Line 11:
	'''Map your AIM Sensors/Channels to AIM SmartyCam Functions'''. Each AIM SmartyCam Function data is then sent over on the CAN Bus via a specific CAN Channel ID, and CAN Offset (more on this later).		'''Map your AIM Sensors/Channels to AIM SmartyCam Functions'''. Each AIM SmartyCam Function data is then sent over on the CAN Bus via a specific CAN Channel ID, and CAN Offset (more on this later).

	[[Image:AimSmartyCamMapChannels.png\|800px]] [[Image:AimRS3SmartyCamStream.png\|800px]]
			'''Race Studio 2'''

			[[Image:AimSmartyCamMapChannels.png\|800px]]


			'''Race Studio 3'''

			[[Image:AimRS3SmartyCamStream.png\|800px]]

Sbarton: /* 3) Click AIM SmartyCam Functions settings to setup the channels you want exported to RCP */

2020-03-03T23:15:43Z

3) Click AIM SmartyCam Functions settings to setup the channels you want exported to RCP

← Older revision		Revision as of 23:15, 3 March 2020
Line 11:		Line 11:
	'''Map your AIM Sensors/Channels to AIM SmartyCam Functions'''. Each AIM SmartyCam Function data is then sent over on the CAN Bus via a specific CAN Channel ID, and CAN Offset (more on this later).		'''Map your AIM Sensors/Channels to AIM SmartyCam Functions'''. Each AIM SmartyCam Function data is then sent over on the CAN Bus via a specific CAN Channel ID, and CAN Offset (more on this later).

	[[Image:AimSmartyCamMapChannels.png\|800px]]		[[Image:AimSmartyCamMapChannels.png\|800px]] [[Image:AimRS3SmartyCamStream.png\|800px]]



Line 26:		Line 27:

	You will need to know which sensor you mapped to which AIM Functions in order to add those CAN Channels into RCP. Each AIM Function has a specific CAN Channel ID and Offset that does not change no matter what sensor is mapped to that Function (See [[AIM_Integration_CAN_Mapping#Table_2:_AIM_Function_to_CAN_Channel_and_CAN_Offset\|Appendix A Table 2]] at bottom of this document). Later we will be referring back to your AIM Functions to Channels mapping that you did here, so keep this window available.		You will need to know which sensor you mapped to which AIM Functions in order to add those CAN Channels into RCP. Each AIM Function has a specific CAN Channel ID and Offset that does not change no matter what sensor is mapped to that Function (See [[AIM_Integration_CAN_Mapping#Table_2:_AIM_Function_to_CAN_Channel_and_CAN_Offset\|Appendix A Table 2]] at bottom of this document). Later we will be referring back to your AIM Functions to Channels mapping that you did here, so keep this window available.


	==='''4) Connect [https://www.autosportlabs.com/product/aim-dashboard-telemetry-cable/ AIM to RCP cable]'''===		==='''4) Connect [https://www.autosportlabs.com/product/aim-dashboard-telemetry-cable/ AIM to RCP cable]'''===

Sbarton: /* 8) Click + Button to add a New Channel */

2018-08-08T13:59:23Z

8) Click + Button to add a New Channel

← Older revision		Revision as of 13:59, 8 August 2018
Line 59:		Line 59:


	'''Customize Channel Info by clicking gear icon.''' This just changes how it is displayed in RCP.		'''Customize Channel Info by clicking gear icon.''' This just changes how it is displayed in RCP.
	Note: You cannot have 2 channels with same name in RCP. Ie. if you already have RPM in RCP, if you also add RPM via AIM, you need to name one of the channels to something different like EngineSpd.		Note: You cannot have 2 channels with same name in RCP. Ie. if you already have RPM in RCP, if you also add RPM via AIM, you need to name one of the channels to something different like EngineSpd.

			See [https://wiki.autosportlabs.com/AIM_Integration_CAN_Mapping#CAN_Channel_Mapping_Notes Can Channel Mapping Notes] below.

	[[Image:RCPCustimizeCAN.jpg\|800px]]		[[Image:RCPCustimizeCAN.jpg\|800px]]
Line 89:		Line 91:

	[[Image:RCPCanConversion.jpg\|800px]]		[[Image:RCPCanConversion.jpg\|800px]]


	==='''9) Write your Config to RCP'''===		==='''9) Write your Config to RCP'''===

Sbarton: /* CAN Channel Mapping Notes: */

2018-08-08T13:55:55Z

CAN Channel Mapping Notes:

← Older revision		Revision as of 13:55, 8 August 2018
Line 136:		Line 136:
	Example: If in [[AIM_Integration_CAN_Mapping#3.29_Click_AIM_SmartyCam_Functions_settings_to_setup_the_channels_you_want_exported_to_RCP\|Step 3 above]], you mapped your DiffTemp sensor/channel to the EXHAUST GAS Function in the AIM SmartyCam settings, you would edit the EGT Channel in RCP and change it to DiffTemp. Because EGT and DiffTemp are both Temp Sensors, the Multiplier and conversions probably would not need to be changed. Min/Max would need to be changed (EGT Max is like 2000 but DiffTemp Max is like 300). If instead you mapped a pressure sensor to EXHAUST GAS Function, you would need to change the Multiplier to 0.01 from the default of 0.1.		Example: If in [[AIM_Integration_CAN_Mapping#3.29_Click_AIM_SmartyCam_Functions_settings_to_setup_the_channels_you_want_exported_to_RCP\|Step 3 above]], you mapped your DiffTemp sensor/channel to the EXHAUST GAS Function in the AIM SmartyCam settings, you would edit the EGT Channel in RCP and change it to DiffTemp. Because EGT and DiffTemp are both Temp Sensors, the Multiplier and conversions probably would not need to be changed. Min/Max would need to be changed (EGT Max is like 2000 but DiffTemp Max is like 300). If instead you mapped a pressure sensor to EXHAUST GAS Function, you would need to change the Multiplier to 0.01 from the default of 0.1.

	==='''CAN Channel Mapping Notes:'''===		==='''CAN Channel Mapping Notes'''===
	1) Channel name is what will show up in your RCP and Podium display. It does not have to exactly match the name you used in AIM.		1) Channel name is what will show up in your RCP and Podium display. It does not have to exactly match the name you used in AIM.

Sbarton: /* 5) Open Race Capture App and save current Race Capture Settings to disk */

2018-08-08T13:44:42Z