PodiumConnect AEM CD7 VDM - Revision history

Brentp: /* Verifying data on the RaceCapture dashboard */

2020-06-19T15:40:36Z

Verifying data on the RaceCapture dashboard

← Older revision		Revision as of 15:40, 19 June 2020
Line 16:		Line 16:
	==Verifying data on the RaceCapture dashboard==		==Verifying data on the RaceCapture dashboard==
	Verify the proper data is being received by going to the RaceCapture dashboard. Navigate to the raw channels view to view all channels currently in the system. Here, you will see the data currently being broadcasted to PodiumConnect, mapped through the AEM preset.		Verify the proper data is being received by going to the RaceCapture dashboard. Navigate to the raw channels view to view all channels currently in the system. Here, you will see the data currently being broadcasted to PodiumConnect, mapped through the AEM preset.

			[[file:PodiumConnect_AEM_VDM_raw_data.png]]

	==Continue with the remaining setup steps to verify telemetry==		==Continue with the remaining setup steps to verify telemetry==
	Once you've verified connectivity, you can [[PodiumConnect#Select_your_Preset_configuration\|resume the rest of the setup process to confirm telemetry connectivity]]		Once you've verified connectivity, you can [[PodiumConnect#Select_your_Preset_configuration\|resume the rest of the setup process to confirm telemetry connectivity]]

Brentp: /* Continue with the remaining setup steps to verify telemetry */

2020-06-19T02:23:42Z

Continue with the remaining setup steps to verify telemetry

← Older revision		Revision as of 02:23, 19 June 2020
Line 18:		Line 18:

	==Continue with the remaining setup steps to verify telemetry==		==Continue with the remaining setup steps to verify telemetry==
	Once you've verified connectivity, you can [[~~https://wiki.autosportlabs.com/~~PodiumConnect#Select_your_Preset_configuration\|resume the rest of the setup process to confirm telemetry connectivity]]		Once you've verified connectivity, you can [[PodiumConnect#Select_your_Preset_configuration\|resume the rest of the setup process to confirm telemetry connectivity]]

Brentp: /* Verifying CAN bus connectivity */

2020-06-19T00:21:21Z

Verifying CAN bus connectivity

← Older revision		Revision as of 00:21, 19 June 2020
Line 12:		Line 12:

	==Verifying CAN bus connectivity==		==Verifying CAN bus connectivity==
	With both PodiumConnect and the CD7 powered, you should see the orange CAN bus indicator illuminated / blinking. This means PodiumConnect is receiving CAN bus data from the AEM system.		With both PodiumConnect and the CD7 powered, you should see the orange CAN bus indicator illuminated / blinking. This means PodiumConnect is receiving CAN bus data from the AEM system.

			==Verifying data on the RaceCapture dashboard==
			Verify the proper data is being received by going to the RaceCapture dashboard. Navigate to the raw channels view to view all channels currently in the system. Here, you will see the data currently being broadcasted to PodiumConnect, mapped through the AEM preset.

	==Continue with the remaining setup steps to verify telemetry==		==Continue with the remaining setup steps to verify telemetry==
	Once you've verified connectivity, you can [[https://wiki.autosportlabs.com/PodiumConnect#Select_your_Preset_configuration\|resume the rest of the setup process to confirm telemetry connectivity]]		Once you've verified connectivity, you can [[https://wiki.autosportlabs.com/PodiumConnect#Select_your_Preset_configuration\|resume the rest of the setup process to confirm telemetry connectivity]]

Brentp: Created page with "==Integrating PodiumConnect with the AEM CD7 + VDM== PodiumConnect receives data from the AEM system via the CD7 dashboard and the AEM Vehicle Dynamics Module (VDM). The VDM..."

2020-06-18T21:57:05Z

Created page with "==Integrating PodiumConnect with the AEM CD7 + VDM== PodiumConnect receives data from the AEM system via the CD7 dashboard and the AEM Vehicle Dynamics Module (VDM). The VDM..."

New page

==Integrating PodiumConnect with the AEM CD7 + VDM==

PodiumConnect receives data from the AEM system via the CD7 dashboard and the AEM Vehicle Dynamics Module (VDM). The VDM together with the CD7 provides the [[PodiumConnect#Minimum_Data_required_for_proper_operation|minimum data required for proper operation]]. Additional sensor data can be broadcasted by the CD7 via CAN bus, as well as reading data from [[CAN_Bus_Integration|ECUs, using our standard CAN bus integration and presets]]

==Connecting the AEM system==
The AEM CD7 and VDM provides a two wire CAN bus connection to external devices. Connect the AEM CAN high and CAN low wires to the PodiumConnect '''CAN1 high''' and '''CAN1 low''' connections using the provided wiring harness.
[[file:PodiumConnect_AEM_CD7_VDM_integration.png]]

==Selecting the AEM CD7 preset==
During the first time setup wizard, select the AEM CD7 preset during installation.
[[file:AEM_CD7_with_VDM_preset.png]]

==Verifying CAN bus connectivity==
With both PodiumConnect and the CD7 powered, you should see the orange CAN bus indicator illuminated / blinking. This means PodiumConnect is receiving CAN bus data from the AEM system.

==Continue with the remaining setup steps to verify telemetry==
Once you've verified connectivity, you can [[https://wiki.autosportlabs.com/PodiumConnect#Select_your_Preset_configuration|resume the rest of the setup process to confirm telemetry connectivity]]