Jstoezel: Created page with "=Unbox= =Install SIM Card into Telemetry Module= ==Purchasing a SIM Card== ===Which SIM card to get?=== This is largely determined by the coverage map of the race track you'll ..."

2014-10-15T01:28:53Z

Created page with "=Unbox= =Install SIM Card into Telemetry Module= ==Purchasing a SIM Card== ===Which SIM card to get?=== This is largely determined by the coverage map of the race track you'll ..."

New page

=Unbox=

=Install SIM Card into Telemetry Module=
==Purchasing a SIM Card==

===Which SIM card to get?===
This is largely determined by the coverage map of the race track you'll be at. Use the coverage map checker for the respective carriers.

===T-Mobile===
Purchase a "Pay By the Day" SIM card from your local T-Mobile dealer. We recommend picking a plan with the 2G/3G unlimited data, which is currently $3 USD/day. The plan is only charged when data is actually used during a 24 hour period. Visit [http://prepaid-phones.t-mobile.com/prepaid-plans T-Mobile] for more details on prepaid plans.

[http://autosportlabs.net/RaceCapturePro_TelemetryQuickstart T-Mobile Coverage map tool]

In the RaceAnalyzer software, configure the APN settings using the following values:
*APN Host: epc.tmobile.com
*APN User: <leave this blank>
*APN Password: <leave this blank>

===AT&T===
In the RaceAnalyzer software, configure the APN settings using the following values:

*APN Host: wap.cingular
*APN User: wap@cingulargprs.com
*APN Password: cingular1

[http://www.att.com/maps/wireless-coverage.html AT&T Coverage Map tool]

[[Cellular_Telemetry_APNs|Big list of Carriers / APNs worldwide]]

==Installing SIM card==
* Open RaceCapture/Pro mk2 enclosure

TODO

===Unlatch SIM card holder===
Unlatch the card holder by gently sliding the cover in the 'open' direction and swing the cover open.

===Insert SIM card===
Insert the SIM card, taking note of the beveled edge. The SIM card can only be inserted in one direction.

TODO PIC

===Latch simcard holder in place===
Swing the cover closed and slide towards the 'lock' position. take care that the cover is locked on both sides of the holder and it is flush with the board.

TODO

===Re-assemble case===
Slide board back into enclosure. Ensure LEDs are aligned with end plate and reattach end plate with screws.
* You may need to gently press the LEDs down flush against the board in order for them to line up with the holes in the opposite end plate.

=Connect components=

==Connecting Antenna==
* Connect antenna to RF port

TODO

==Telemetry LEDs==

TODO

===Power LED===

TODO

===Network status LED===

TODO

===Transmit / Receive LEDs===

TODO

=Create a RCLive account and register your device=

* Go to [http://www.race-capture.com www.race-capture.com], click on Signup in the top navigation
* Create your account
* After creating your account you will be prompted to add your device. Do it :)
* Once added you will be given a device id, save this, you'll need it soon.

=Install RaceAnalyzer=
Follow the software installations instructions here: http://www.autosportlabs.net/RaceCapturePro_SoftwareOperation

=Configure RaceCapture/Pro=
For general RaceCapture/Pro installation and configuration be sure to review the [[RaceCapturePro_installation_guide|Installation]] and [[RaceCapturePro_SoftwareOperation|Software]] guides.

===Read Configuration===
'''Before configuring any parameters [[RaceCapturePro_SoftwareOperation#Reading_Configuration|read the configuration]] from RaceCapture/Pro'''

===Set channel sample rates===

Note, with the real-time telemetry sample rates are automatically limited to 10Hz. Logging to local SD card will be at the normal sample rates defined in the configuration.

====Available bandwidth====
The total available data rate is a function of number of channels combined with sample rate and is also affected by cellular network conditions. We will have an expanded guide and tool set to help identify optimal sample rates.

===Set device id===

Add your device id that you wrote down when adding your device to race-capture.com to the Telemetry Device Id field under the Logging/Telemetry section:
[[File:Devicesetup.png]]

==Write configuration==
* Click the 'Write' button in RaceAnalyzer
* Power cycle RCP (turn off then on again)

==Testing==
RaceCapture/Pro with GPS & telemetry needs more power than a regular USB port can supply. You'll either need to connect it to your car's power directly, via a cigarette power adapter with wires or a powered usb hub similar to these:

* [http://www.amazon.com/Sabrent-Powered-adapter-compatible-HB-USB30/dp/B00BJPRI1Y/ref=sr_1_3?ie=UTF8&qid=1367991516&sr=8-3&keywords=usb+hub+high+power Sabrent Powered USB hub]
* [http://www.amazon.com/D-Link-DUB-H7-High-Speed-7-Port/dp/B00008VFAF/ref=sr_1_5?ie=UTF8&qid=1367991578&sr=8-5&keywords=usb+hub+high+power D-Link powered hub]

We have not tested the above units; we offer them as suggestions of possible USB hubs with enhanced power capabilities.

Press the black switch on the front of your RaceCapture/Pro device to start logging. You will observe the Transmit LED blinking rapidly once the Cellular module is registered to the cellular network and after the link has been initialized, which ranges from a few seconds and up to 1 minute.

Got to [http://race-capture.com/home race-capture.com/home], you should see a new event labeled 'Ad-hoc event ...', click on it, then click on your device on the next page.

==Success==
View your live telemetry!
Race faster!

=Troubleshooting=

If you cannot see data flowing to [http://www.race-capture.com www.race-capture.com] check the following:

* You have $$ on your sim card from T-Mobile.
** Refill [http://prepaid-phones.t-mobile.com/prepaid-refill T-Mobile Refill site]

* Your RaceCapture/Pro logging rates are set to the suggested sample rates

* You are powering RaceCapture/Pro using a 12v power supply through the terminal block. It will not work over computer USB power due to power constraints

* When connected to the cell network you should see a slow flash on the cellular module's status light - 1 flash every 3 seconds

* When actively logging you should see the TX light (upper left light on cellular module) rapidly flashing. '''This may take up to 1 minute for the initial connection'''.

* If you didn't create an explicit event for the day on [http://www.race-capture.com www.race-capture.com], it will create an 'ad hoc' event. Watch for it to show up automatically on your [http://race-capture.com/home home event page]

* Still having troubles? Let us know on the [http://www.autosportlabs.org forums] and we'll help you out!

RaceCapturePro mk2 TelemetryQuickstart - Revision history

Jstoezel: Created page with "=Unbox= =Install SIM Card into Telemetry Module= ==Purchasing a SIM Card== ===Which SIM card to get?=== This is largely determined by the coverage map of the race track you'll ..."