RaceCaptureTrack MK4 - Revision history

Brentp: /* Connecting to RaceCapture System Dashboard */

2026-04-14T04:28:07Z

Connecting to RaceCapture System Dashboard

← Older revision		Revision as of 04:28, 14 April 2026
Line 69:		Line 69:
	* Go to your device’s WiFi settings and connect to the RaceCapture/Track MK4 WiFi access point.		* Go to your device’s WiFi settings and connect to the RaceCapture/Track MK4 WiFi access point.
	* '''Note:''' The default WiFi access point is open (no password). You can configure a password and enable encryption later under Setup > Wireless in the RaceCapture app.		* '''Note:''' The default WiFi access point is open (no password). You can configure a password and enable encryption later under Setup > Wireless in the RaceCapture app.
	* On Android devices, you can also pair via Bluetooth using the default PIN ~~1234~~. This can also be changed later in Setup > Wireless.		* On Android devices, you can also pair via Bluetooth using the default PIN 123456. This can also be changed later in Setup > Wireless.
	* Once you've linked the Bluetooth or WiFi (Mobile), or USB (Windows or OSX) launch the RaceCapture app.		* Once you've linked the Bluetooth or WiFi (Mobile), or USB (Windows or OSX) launch the RaceCapture app.
	* Launch the RaceCapture app to begin configuration. The app will automatically start the First-Time Setup Wizard to guide you through the initial setup process.		* Launch the RaceCapture app to begin configuration. The app will automatically start the First-Time Setup Wizard to guide you through the initial setup process.

	=== First Time Wizard Setup ===		=== First Time Wizard Setup ===
	The RaceCapture app will guide you through a brief automated setup and tour. During this process the connection to RaceCapture/Track MK4 will be verified.<br>		The RaceCapture app will guide you through a brief automated setup and tour. During this process the connection to RaceCapture/Track MK4 will be verified.<br>

Brentp: /* Mounting */

2026-04-03T20:46:57Z

Mounting

← Older revision		Revision as of 20:46, 3 April 2026
Line 9:		Line 9:
	This orientation aligns with the factory calibration of the internal accelerometer and gyroscope.		This orientation aligns with the factory calibration of the internal accelerometer and gyroscope.

	~~Also:~~		See the guide for [[RaceCapturePro_Sensors#IMU_(Accelerometer_/_Gyro)\|remapping the IMU channels for alternate mounting orientations]].

			'''Additional Notes:'''
	* Mount the unit in a concealed, protected area of the vehicle, away from direct heat sources and moisture.		* Mount the unit in a concealed, protected area of the vehicle, away from direct heat sources and moisture.
	* Use hook-and-loop (Velcro) fasteners or other suitable mounting methods to secure the unit in place while allowing for easy removal if needed.		* Use hook-and-loop (Velcro) fasteners or other suitable mounting methods to secure the unit in place while allowing for easy removal if needed.

	'''Note:''' If it is necessary to install the unit in an alternative orientation (e.g., vertical, on-edge, or upside down), ensure it is rotated in clean 90-degree increments relative to the vehicle’s primary axes. Avoid mounting the device at an arbitrary angle, as this can affect sensor accuracy.

	~~Expert mode: For non-standard orientations, remap the accelerometer and gyroscope axes in the Setup menu to reflect the installed position.~~

	==== Connectors ====		==== Connectors ====

Abdurrehman Akhtar: /* Real-time Telemetry Setup */

2026-03-05T11:31:20Z

Real-time Telemetry Setup

@@ Line 184: / Line 184: @@
 * Podium Website : Provides web access to the same telemetry data available in the Podium app.
-=== Step 1 – Configure WiFi Connectivity ===
+=== Step 1 : Configure WiFi Connectivity ===
 [[File:Inital setup.gif|750px]]
-# Open the RaceCapture app and connect to your device.
+* Open the RaceCapture app and connect to your device.
-# Navigate to Setup from the main screen.
+* Navigate to Setup from the main screen.
-# Click Read to load the current configuration.
+* Click Read to load the current configuration.
-# Select the Wireless tab.
+* Select the Wireless tab.
-* Configure the following settings:
+** Configure the following settings:
-** Enable WiFi Support
+*** Enable WiFi Support
-** Enable Client Mode
+*** Enable Client Mode
-** Enter the SSID and password for your hotspot or WiFi network
+*** Enter the SSID and password for your hotspot or WiFi network
 '''Note:''' The hotspot must support 2.4 GHz WiFi. Many hotspots default to 5 GHz, which is not supported. If necessary, configure your hotspot to allow 2.4 GHz operation.
 For testing purposes, you may use your phone’s hotspot to confirm the connection is working correctly.
-Next:
+* Enable WiFi Telemetry at the bottom of the Wireless settings.
-# Enable WiFi Telemetry at the bottom of the Wireless settings.
+[[File:Enable wifi telemetry option.png|750px]]
 == Comprehensive Setup Guide ==

Abdurrehman Akhtar at 09:40, 5 March 2026

2026-03-05T09:40:17Z

@@ Line 173: / Line 173: @@
 | Indicates when real-time telemetry is actively broadcasting
 |}
 == Comprehensive Setup Guide ==

Abdurrehman Akhtar at 09:39, 5 March 2026

2026-03-05T09:39:02Z

← Older revision		Revision as of 09:39, 5 March 2026
Line 17:		Line 17:

	Expert mode: For non-standard orientations, remap the accelerometer and gyroscope axes in the Setup menu to reflect the installed position.		Expert mode: For non-standard orientations, remap the accelerometer and gyroscope axes in the Setup menu to reflect the installed position.

	~~== Real-time Telemetry Setup ==~~
	~~This section explains how to configure your device to stream live telemetry data to the Podium cloud service so it can be viewed remotely using the Podium app or the Podium website.~~

	~~=== Overview ===~~
	~~Three components are used when working with live telemetry:~~

	* RaceCapture App : Used to connect directly to the device for configuration and local dashboard viewing.
	* Podium App : Used to view live telemetry and previously recorded sessions in the cloud.
	* Podium Website : Provides web access to the same telemetry data available in the Podium app.

	~~=== Step 1 – Configure WiFi Connectivity ===~~
	~~[[File:Inital setup.gif\|750px]]~~
	~~# Open the RaceCapture app and connect to your device.~~
	~~# Navigate to Setup from the main screen.~~
	~~# Click Read to load the current configuration.~~
	~~# Select the Wireless tab.~~
	* Configure the following settings:
	** Enable WiFi Support
	** Enable Client Mode
	** Enter the SSID and password for your hotspot or WiFi network
	~~'''Note:''' The hotspot must support 2.4 GHz WiFi. Many hotspots default to 5 GHz, which is not supported. If necessary, configure your hotspot to allow 2.4 GHz operation.~~
	~~For testing purposes, you may use your phone’s hotspot to confirm the connection is working correctly.~~
	~~Next:~~
	~~# Enable WiFi Telemetry at the bottom of the Wireless settings.~~




	==== Connectors ====		==== Connectors ====

Abdurrehman Akhtar: /* Real-time Telemetry Setup */

2026-03-05T09:37:35Z

Real-time Telemetry Setup

← Older revision		Revision as of 09:37, 5 March 2026
Line 38:		Line 38:
	** Enable Client Mode		** Enable Client Mode
	** Enter the SSID and password for your hotspot or WiFi network		** Enter the SSID and password for your hotspot or WiFi network
			'''Note:''' The hotspot must support 2.4 GHz WiFi. Many hotspots default to 5 GHz, which is not supported. If necessary, configure your hotspot to allow 2.4 GHz operation.
			For testing purposes, you may use your phone’s hotspot to confirm the connection is working correctly.
			Next:
			# Enable WiFi Telemetry at the bottom of the Wireless settings.

Abdurrehman Akhtar at 09:35, 5 March 2026

2026-03-05T09:35:36Z

← Older revision		Revision as of 09:35, 5 March 2026
Line 17:		Line 17:

	Expert mode: For non-standard orientations, remap the accelerometer and gyroscope axes in the Setup menu to reflect the installed position.		Expert mode: For non-standard orientations, remap the accelerometer and gyroscope axes in the Setup menu to reflect the installed position.

			== Real-time Telemetry Setup ==
			This section explains how to configure your device to stream live telemetry data to the Podium cloud service so it can be viewed remotely using the Podium app or the Podium website.

			=== Overview ===
			Three components are used when working with live telemetry:

			* RaceCapture App : Used to connect directly to the device for configuration and local dashboard viewing.
			* Podium App : Used to view live telemetry and previously recorded sessions in the cloud.
			* Podium Website : Provides web access to the same telemetry data available in the Podium app.

			=== Step 1 – Configure WiFi Connectivity ===
			[[File:Inital setup.gif\|750px]]
			# Open the RaceCapture app and connect to your device.
			# Navigate to Setup from the main screen.
			# Click Read to load the current configuration.
			# Select the Wireless tab.
			* Configure the following settings:
			** Enable WiFi Support
			** Enable Client Mode
			** Enter the SSID and password for your hotspot or WiFi network






	==== Connectors ====		==== Connectors ====

Brentp: /* Backing Up Configurations */

2026-02-15T19:32:02Z

Backing Up Configurations

← Older revision		Revision as of 19:32, 15 February 2026
Line 417:		Line 417:
	Steps:		Steps:
	* Connect to RaceCapture/Track MK4 using the RaceCapture app - using USB, or WiFi.		* Connect to RaceCapture/Track MK4 using the RaceCapture app - using USB, or WiFi.
	* Navigate to Setup and press the Read button to read the current settings from ~~Podium Connect Micro~~.		* Navigate to Setup and press the Read button to read the current settings from your system.
	* Press Save to save your settings to a file. These will be later restored after firmware is updated.		* Press Save to save your settings to a file. These will be later restored after firmware is updated.

Brentp: /* Accessing Flash Memory for Log File Transfer */

2026-02-15T19:31:48Z

Accessing Flash Memory for Log File Transfer

← Older revision		Revision as of 19:31, 15 February 2026
Line 388:		Line 388:

	==Accessing Flash Memory for Log File Transfer==		==Accessing Flash Memory for Log File Transfer==
	~~PodiumConnect/Micro~~ logs data locally in addition to live telemetry streaming. These logs can be accessed by mounting the system as a USB flash drive.		Your system logs data locally in addition to live telemetry streaming. These logs can be accessed by mounting the system as a USB flash drive.

	'''To enable USB drive mode:'''		'''To enable USB drive mode:'''
Line 410:		Line 410:
	* Navigate to Setup > Firmware.		* Navigate to Setup > Firmware.
	* Press the Format Flash Storage button.		* Press the Format Flash Storage button.

	=Firmware and Software Updates=		=Firmware and Software Updates=
	Below are the steps for updating your firmware.		Below are the steps for updating your firmware.

Brentp: /* Wi-Fi Reliability Improvements in Firmware v2.23.3 */

2026-02-15T19:31:32Z

Wi-Fi Reliability Improvements in Firmware v2.23.3

← Older revision		Revision as of 19:31, 15 February 2026
Line 150:		Line 150:
	For instructions on updating firmware, see the Updating Firmware section below.		For instructions on updating firmware, see the Updating Firmware section below.


	~~==== Wi-Fi Reliability Improvements in Firmware v2.23.3 ====~~
	Firmware version 2.23.3 introduces multiple improvements to Wi-Fi reliability and connection stability for RaceCapture/Track MK4 and PodiumConnect/Micro. These updates are focused on improving real-world Wi-Fi behavior during configuration and telemetry use.

	~~'''Summary of Improvements'''~~

	* Improved Wi-Fi connection stability during normal operation
	* More reliable reconnection behavior after temporary signal loss
	* Improved handling of access point and network transitions
	* Reduced likelihood of stalled or unresponsive Wi-Fi connections
	* Improved behavior during STA hotspot scanning
	* General robustness improvements when operating in environments with variable or congested wireless conditions

	~~'''Note:''' These improvements apply automatically when running firmware version 2.23.3 or newer. No additional configuration is required.~~

	=== LED Status Indicators ===		=== LED Status Indicators ===