TachAdapter - Revision history

Brentp: /* Installation */

2015-03-13T17:38:17Z

Installation

← Older revision		Revision as of 17:38, 13 March 2015
Line 9:		Line 9:
	===Installation===		===Installation===

	Installation ~~is straightforward~~:		Installation:
	* Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.		* Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.
			** We recommend 24 gauge wire, but wire gauge is not critical- so long as it fits the module.
	* Connect the tach output to the input of your tachometer.		* Connect the tach output to the input of your tachometer.
	* ~~Wrap~~ the ~~board~~ with electrical tape ~~or shrink tubing~~- the board is small enough to integrate into your wire harness / bundle.		* Seal the module with shrink tubing or electrical tape- the board is small enough to integrate into your wire harness / bundle.

	===Example Wiring===		===Example Wiring===

Brentp: /* Schematics */ changed horiz alignment

2012-01-26T21:00:24Z

Schematics: changed horiz alignment

← Older revision		Revision as of 21:00, 26 January 2012
Line 20:		Line 20:

	===Schematics===		===Schematics===
	[[Image:tach_adapter_sch.png\|thumb\|500px]]		[[Image:tach_adapter_sch.png\|left\|thumb\|500px]]

Brentp: /* Schematics */ added thumbnail to schematics

2012-01-26T20:59:50Z

Schematics: added thumbnail to schematics

← Older revision		Revision as of 20:59, 26 January 2012
Line 20:		Line 20:

	===Schematics===		===Schematics===
	[[Image:tach_adapter_sch.png]]		[[Image:tach_adapter_sch.png\|thumb\|500px]]

Brentp at 20:56, 26 January 2012

2012-01-26T20:56:29Z

← Older revision		Revision as of 20:56, 26 January 2012
Line 18:		Line 18:

	Example wiring for a 4 cylinder wasted spark application: yellow wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs.		Example wiring for a 4 cylinder wasted spark application: yellow wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs.

			===Schematics===
			[[Image:tach_adapter_sch.png]]

Brentp at 06:49, 24 August 2011

2011-08-24T06:49:54Z

← Older revision		Revision as of 06:49, 24 August 2011
Line 1:		Line 1:
	==Tachometer Adapter==		==Tachometer Adapter==

	This small board adapts a Tachometer to up to 4 individual coil packs, capable of handling 4, 6 or 8 cylinder wasted spark applications.		This small board adapts a Tachometer to up to 4 individual coil packs, capable of handling 4, 6 or 8 cylinder wasted spark applications.

			Available for purchase in our [http://www.autosportlabs.com/tach-adapter-p-65.html Online Store]

	[[Image:tachAdapter_small.jpg]]		[[Image:tachAdapter_small.jpg]]
Line 15:		Line 17:
	[[Image:tachAdapter_wired_small.jpg]]		[[Image:tachAdapter_wired_small.jpg]]

	Example wiring for a 4 cylinder wasted spark application: ~~Yellow~~ wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs.		Example wiring for a 4 cylinder wasted spark application: yellow wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs.

Brentp: /* Tachometer Adapter */ grammar.

2011-08-24T06:35:04Z

Tachometer Adapter: grammar.

← Older revision		Revision as of 06:35, 24 August 2011
Line 1:		Line 1:
	==Tachometer Adapter==		==Tachometer Adapter==

	This small board adapts a Tachometer to up to 4 individual coil packs, ~~making it~~ capable of handling 4, 6 or 8 cylinder wasted spark applications.		This small board adapts a Tachometer to up to 4 individual coil packs, capable of handling 4, 6 or 8 cylinder wasted spark applications.

	[[Image:tachAdapter_small.jpg]]		[[Image:tachAdapter_small.jpg]]

Brentp: /* Installation */

2011-08-24T06:34:26Z

Installation

← Older revision		Revision as of 06:34, 24 August 2011
Line 8:		Line 8:

	Installation is straightforward:		Installation is straightforward:
	- Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.		* Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.
	- Connect the tach output to the input of your tachometer.		* Connect the tach output to the input of your tachometer.
	- Wrap the board with electrical tape or shrink tubing- the board is small enough to integrate into your wire harness / bundle.		* Wrap the board with electrical tape or shrink tubing- the board is small enough to integrate into your wire harness / bundle.

	===Example Wiring===		===Example Wiring===

Brentp: Created page with "==Tachometer Adapter== This small board adapts a Tachometer to up to 4 individual coil packs, making it capable of handling 4, 6 or 8 cylinder wasted spark applications. [[Imag..."

2011-08-24T06:29:24Z

Created page with "==Tachometer Adapter== This small board adapts a Tachometer to up to 4 individual coil packs, making it capable of handling 4, 6 or 8 cylinder wasted spark applications. [[Imag..."

New page

==Tachometer Adapter==

This small board adapts a Tachometer to up to 4 individual coil packs, making it capable of handling 4, 6 or 8 cylinder wasted spark applications.

[[Image:tachAdapter_small.jpg]]

===Installation===

Installation is straightforward:
- Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.
- Connect the tach output to the input of your tachometer.
- Wrap the board with electrical tape or shrink tubing- the board is small enough to integrate into your wire harness / bundle.

===Example Wiring===
[[Image:tachAdapter_wired_small.jpg]]

Example wiring for a 4 cylinder wasted spark application: Yellow wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs.