USB-serial adapters - Revision history

Brentp: /* USB-Serial Adapters */ changed name to usb to serial adapters to make page more searchable

2009-03-28T23:29:09Z

USB-Serial Adapters: changed name to usb to serial adapters to make page more searchable

← Older revision		Revision as of 23:29, 28 March 2009
Line 1:		Line 1:
	=USB-Serial Adapters=		=USB to Serial Adapters=

	==Typical problems with USB-Serial chipset==		==Typical problems with USB to Serial chipset==

	===Double-check functionality with a known-good environment===		===Double-check functionality with a known-good environment===

Brentp: /* Adapters and chipset technologies */

2008-11-22T18:31:57Z

Adapters and chipset technologies

← Older revision		Revision as of 18:31, 22 November 2008
Line 26:		Line 26:
	===FTDI Chipset===		===FTDI Chipset===

	[[~~Images~~:ftdi_usb_serial.jpg]]<br>		[[Image:ftdi_usb_serial.jpg]]<br>

	===Prolific Chipset===		===Prolific Chipset===
Line 32:		Line 32:
	These are commonly found in low cost adapters.		These are commonly found in low cost adapters.

	[[~~Images~~:prolific_usb_serial.jpg]]<br>		[[Image:prolific_usb_serial.jpg]]<br>

	===HugePine Chipset===		===HugePine Chipset===

Brentp: Initial page for usb-serial adapters

2008-11-22T18:31:32Z

Initial page for usb-serial adapters

New page

=USB-Serial Adapters=

==Typical problems with USB-Serial chipset==

===Double-check functionality with a known-good environment===
It's always good to ensure the equipment you're communicating with (Megajolt, etc.) actually works in a known good environment. The best way to do this is to remove the device in question from the vehicle, power it up on the bench with a fresh 9V battery (or equivalent), and test it with a computer with a built-in serial port.

Once you can establish this base-line, you can move on to troubleshooting other aspects of the installation.

===Interference issues with running engine===
Some USB-Serial chipsets are especially sensitive to the high voltage spikes emitted from the ignition system. If timeout/communication errors occur after the engine is started, try:

*Moving the adapter away from the suspected hostile environment using a serial extension cable
*Replace plug-wires
*Check ground connections on components (use a star-grounding pattern)
*If the laptop is plugged in to the vehicle (either 12V or an AC inverter) try running the laptop off of it's internal battery
*Try a different USB-Serial adapter

===Application and/or windows crashing===
Problems with the adapter's device driver software can cause the software application to crash, or worse, cause the Operating System to crash (Blue Screen on Windows). If this happens frequently, look for an updated device driver from the manufacturer.

==Adapters and chipset technologies==

Note, the images below are representative and may not match actual hardware. It seems there are endless variants of this technology- if you find new information, please contribute to this page.

===FTDI Chipset===

[[Images:ftdi_usb_serial.jpg]]<br>

===Prolific Chipset===

These are commonly found in low cost adapters.

[[Images:prolific_usb_serial.jpg]]<br>

===HugePine Chipset===

Also found in low-cost adapters. These adapters posed a problem with earlier versions of the Megajolt Lite Jr. Software, but changes in the latest software corrected issues around this adapter.

[[Image:huge_pine_usb_serial.jpg]]<br>