V3.2.x / 2.8.x Installing the new firmware image - Revision history

Brentp: fixed filename to represent the current download image file.

2007-05-23T21:20:49Z

fixed filename to represent the current download image file.

← Older revision		Revision as of 21:20, 23 May 2007
Line 6:		Line 6:


	> hc08sprg.exe COM1 ~~mjlJunior-V3~~.2.1.s19		> hc08sprg.exe COM1 mjlJunior_V3.2.1.s19

	*''Replace COM1 with the COM port your MJLJ is installed on''		*''Replace COM1 with the COM port your MJLJ is installed on''
Line 19:		Line 19:

	c:\>cd c:\mjlj		c:\>cd c:\mjlj
	c:\mjlj>hc08sprg.exe COM1 ~~mjlJunior-V3~~.2.1.s19		c:\mjlj>hc08sprg.exe COM1 mjlJunior_V3.2.1.s19
	Waiting for HC08 reset ACK...received 0xfc (good).		Waiting for HC08 reset ACK...received 0xfc (good).
	Calibration break pulse sent. Count: 1		Calibration break pulse sent. Count: 1

Brentp: bumped version numbers on examples

2007-04-22T01:03:12Z

bumped version numbers on examples

← Older revision		Revision as of 01:03, 22 April 2007
Line 6:		Line 6:


	> hc08sprg.exe COM1 mjlJunior-V3.1.0.s19		> hc08sprg.exe COM1 mjlJunior-V3.2.1.s19

	*''Replace COM1 with the COM port your MJLJ is installed on''		*''Replace COM1 with the COM port your MJLJ is installed on''
Line 19:		Line 19:

	c:\>cd c:\mjlj		c:\>cd c:\mjlj
	c:\mjlj>hc08sprg.exe COM1 mjlJunior-V3.1.0.s19		c:\mjlj>hc08sprg.exe COM1 mjlJunior-V3.2.1.s19
	Waiting for HC08 reset ACK...received 0xfc (good).		Waiting for HC08 reset ACK...received 0xfc (good).
	Calibration break pulse sent. Count: 1		Calibration break pulse sent. Count: 1

Brentp: V3.1.x / 2.7.x Installing the new firmware image moved to V3.2.x / 2.8.x Installing the new firmware image: updating for released version

2007-04-22T00:57:58Z

V3.1.x / 2.7.x Installing the new firmware image moved to V3.2.x / 2.8.x Installing the new firmware image: updating for released version

← Older revision	Revision as of 00:57, 22 April 2007
(No difference)

Brentp: clarified download

2007-03-13T15:31:46Z

clarified download

← Older revision		Revision as of 15:31, 13 March 2007
Line 1:		Line 1:
	From the same area where you downloaded the new firmware, download the "~~PC bootloader~~ programming software" from the [[MJLJ_V3_Downloads\|Downloads area]], and save it to a directory on your hard drive, typically the same location where you saved your new fimware.		From the same area where you downloaded the new firmware, download the "Firmware programming software" from the [[MJLJ_V3_Downloads\|Downloads area]], and save it to a directory on your hard drive, typically the same location where you saved your new fimware.

	Open a command window (Click Start / Run, and enter 'cmd') and then navigate to the directory where you downloaded your MJLJ files.		Open a command window (Click Start / Run, and enter 'cmd') and then navigate to the directory where you downloaded your MJLJ files.

Brentp at 04:14, 2 March 2007

2007-03-02T04:14:37Z

← Older revision		Revision as of 04:14, 2 March 2007
Line 1:		Line 1:
	From the same area where you downloaded the new firmware, download the "PC bootloader programming software" from the [[~~http://www.autosportlabs.net/index.php?title=~~MJLJ_V3_Downloads \| Downloads area]], and save it to a directory on your hard drive, typically the same location where you saved your new fimware.		From the same area where you downloaded the new firmware, download the "PC bootloader programming software" from the [[MJLJ_V3_Downloads\|Downloads area]], and save it to a directory on your hard drive, typically the same location where you saved your new fimware.

	Open a command window (Click Start / Run, and enter 'cmd') and then navigate to the directory where you downloaded your MJLJ files.		Open a command window (Click Start / Run, and enter 'cmd') and then navigate to the directory where you downloaded your MJLJ files.

Brentp at 04:11, 2 March 2007

2007-03-02T04:11:17Z

← Older revision		Revision as of 04:11, 2 March 2007
Line 1:		Line 1:
	From the same area where you downloaded the new firmware, download the "PC bootloader programming software" ~~(hc08sprg~~.~~exe)~~, and save it to a directory on your hard drive, typically the same location where you saved your new fimware.		From the same area where you downloaded the new firmware, download the "PC bootloader programming software" from the [[http://www.autosportlabs.net/index.php?title=MJLJ_V3_Downloads \| Downloads area]], and save it to a directory on your hard drive, typically the same location where you saved your new fimware.

	Open a command window (Click Start / Run, and enter 'cmd') and then navigate to the directory where you downloaded your MJLJ files.		Open a command window (Click Start / Run, and enter 'cmd') and then navigate to the directory where you downloaded your MJLJ files.

Brentp at 03:20, 4 February 2007

2007-02-04T03:20:11Z

← Older revision		Revision as of 03:20, 4 February 2007
Line 6:		Line 6:


	~~c:\mjlj~~>hc08sprg.exe COM1 mjlJunior-V3.1.0.s19		> hc08sprg.exe COM1 mjlJunior-V3.1.0.s19

	*''Replace COM1 with the COM port your MJLJ is installed on''		*''Replace COM1 with the COM port your MJLJ is installed on''

Brentp at 03:19, 4 February 2007

2007-02-04T03:19:28Z

← Older revision		Revision as of 03:19, 4 February 2007
Line 11:		Line 11:
	*''Be sure to specify the correct mjlj firmware file.''		*''Be sure to specify the correct mjlj firmware file.''

	The program will wait for a signal from the MJLJ processor. Once you see this message, apply power to the MJLJ- you will see some ~~informational messages~~, and then you will be prompted to continue programming. If you are ready to flash the new firmware, enter 'Y'.
			The program will wait for a signal from the MJLJ processor. Once you see this message, apply power to the MJLJ- you will see some more information, and then you will be prompted to continue programming. If you are ready to flash the new firmware, enter 'Y'.

	If all goes well, you will see a progress indicator as the processor is loaded with the new firmware image.		If all goes well, you will see a progress indicator as the processor is loaded with the new firmware image.

Brentp: New page: From the same area where you downloaded the new firmware, download the "PC bootloader programming software" (hc08sprg.exe), and save it to a directory on your hard drive, typically the sam...

2007-02-04T03:18:33Z

New page: From the same area where you downloaded the new firmware, download the "PC bootloader programming software" (hc08sprg.exe), and save it to a directory on your hard drive, typically the sam...

New page

From the same area where you downloaded the new firmware, download the "PC bootloader programming software" (hc08sprg.exe), and save it to a directory on your hard drive, typically the same location where you saved your new fimware.

Open a command window (Click Start / Run, and enter 'cmd') and then navigate to the directory where you downloaded your MJLJ files.

First, ensure your mjlj is not powered on. Then, enter the following command:

c:\mjlj>hc08sprg.exe COM1 mjlJunior-V3.1.0.s19

*''Replace COM1 with the COM port your MJLJ is installed on''
*''Be sure to specify the correct mjlj firmware file.''

The program will wait for a signal from the MJLJ processor. Once you see this message, apply power to the MJLJ- you will see some informational messages, and then you will be prompted to continue programming. If you are ready to flash the new firmware, enter 'Y'.

If all goes well, you will see a progress indicator as the processor is loaded with the new firmware image.

Here is a typical output from a successful firmware upgrade:

c:\>cd c:\mjlj
c:\mjlj>hc08sprg.exe COM1 mjlJunior-V3.1.0.s19
Waiting for HC08 reset ACK...received 0xfc (good).
Calibration break pulse sent. Count: 1
Bootloader version string: KX8-IR
Available flash memory: 0xE000-0xFC7F
Erase block size: 64 bytes
Write block size: 32 bytes
Original vector table: 0xFFDC
Bootloader user table: 0xFC80
Bootloader data (hex): 82 80 00 00 00 66 20 f3
Are you sure to program part? [y/N]: y
Memory programmed: 100%