File:Hard rev lim board 1.1.0 solder applied.jpg

No higher resolution available.

Hard_rev_lim_board_1.1.0_solder_applied.jpg ‎(800 × 600 pixels, file size: 99 KB, MIME type: image/jpeg)

solder applied to pads

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	07:07, 8 October 2007		800 × 600 (99 KB)	Brentp (talk \| contribs)	solder applied to pads

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon PowerShot SD300
Exposure time	1/60 sec (0.016666666666667)
F Number	f/5.6
Date and time of data generation	12:43, 7 October 2007
Lens focal length	5.8 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
File change date and time	12:43, 7 October 2007
Y and C positioning	Centered
Exif version	2.2
Date and time of digitizing	12:43, 7 October 2007
Image compression mode	3
APEX shutter speed	5.90625
APEX aperture	4.96875
Maximum land aperture	2.96875 APEX (f/2.8)
Metering mode	Center weighted average
Flash	Flash fired, compulsory flash firing
Color space	sRGB
Focal plane X resolution	10,142.857142857
Focal plane Y resolution	10,142.857142857
Focal plane resolution unit	inches
Sensing method	One-chip color area sensor
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Manual white balance
Digital zoom ratio	1
Scene capture type	Standard