3.2.x/2.8.x firmware upgrade guide: Difference between revisions

(New page: *V3.1.0 / V2.7.0 feature summary *Backing up your current configuration *[[V3.1b Downloading the MJLJ firmware|Dow...)
 
No edit summary
Line 1: Line 1:
*[[V3.1b Feature summary|V3.1.0 / V2.7.0 feature summary]]
*[[V3.1.x / 2.7.x Feature summary|V3.1.0 / V2.7.0 feature summary]]
*[[V3.1b Backing up your current configuration|Backing up your current configuration]]
*[[V3.1.x / 2.7.x Backing up your current configuration|Backing up your current configuration]]
*[[V3.1b Downloading the MJLJ firmware|Downloading the MJLJ firmware]]
*[[V3.1.x / 2.7.x Downloading the MJLJ firmware|Downloading the MJLJ firmware]]
*[[V3.1b Installing the new firmware image|Installing the new firmware image]]
*[[V3.1.x / 2.7.x Installing the new firmware image|Installing the new firmware image]]
*[[V3.1b Installing the configuration software|Installing the configuration software]]
*[[V3.1.x / 2.7.x Installing the configuration software|Installing the configuration software]]
*[[V3.1b New Feature: Calibrate TPS / Load Axis Calibration|New Feature: Calibrate TPS / Load Axis Calibration]]
*[[V3.1.x / 2.7.x New Feature: Calibrate TPS / Load Axis Calibration|New Feature: Calibrate TPS / Load Axis Calibration]]
*[[V3.1b New Feature: Dual on-the-fly switchable Ignition Configuration|New Feature: Dual on-the-fly switchable Ignition Configuration]]]
*[[V3.1.x / 2.7.x New Feature: Dual on-the-fly switchable Ignition Configuration|New Feature: Dual on-the-fly switchable Ignition Configuration]]]
*[[V3.1b Optional hardware modifications|Optional hardware modifications]]
*[[V3.1.x / 2.7.x Optional hardware modifications|Optional hardware modifications]]

Revision as of 01:01, 4 February 2007