Harness specifications: Difference between revisions
(Created page with "=Standardized Connections= The following represents the Autosport Labs standard power, CAN, and analog signaling standard for 2020 and on. ===Connector Standard=== Interconne...") |
No edit summary |
||
(35 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
=Standardized Connections= | =Standardized Connections= | ||
The following represents the | The following represents the new standard starting in 2020 for power, CAN, and analog/digital signaling | ||
=Connector / Signaling Standard= | |||
Interconnects are based on industry-standard M8 and M12 connectors | Interconnects are based on industry-standard M8 and M12 connectors | ||
==Power + CAN== | ==Power + CAN Single interconnect== | ||
* Connector: M8 4P, A coding | |||
[[file:M8_4P_male_pinout.jpg|200px]] | |||
''Male connector pictured'' | |||
==Dual CAN interconnect== | {| class="wikitable" | ||
|- | |||
! Pin !! Connection !! Notes | |||
|- | |||
| 1 || CAN low || | |||
|- | |||
| 2 || Power || Red, 12-14v / 1A (~12W) | |||
|- | |||
| 3 || CAN high || | |||
|- | |||
| 4 || Ground || Black | |||
|} | |||
Power is standard automotive 12-14v (nominal). | |||
The M8 is an industry standard connector; field-wireable connectors for the M8 4P and other variants are available from 3rd parties: | |||
* Male: [https://www.te.com/usa-en/product-T4011008041-000.html Straight] | [https://www.te.com/usa-en/product-T4013008041-000.html Right angle] | |||
* Female: [https://www.te.com/usa-en/product-T4010008041-000.html Straight] | [https://www.te.com/usa-en/product-T4012008041-000.html Right angle] | |||
==Dual CAN + power interconnect== | |||
* Connector: M8 6P, A coding | |||
[[file:M8_6P_male_connector.png]] | |||
''Male connector pictured'' | |||
{| class="wikitable" | |||
|- | |||
! Pin !! Connection !! Notes | |||
|- | |||
| 1 || CAN1 low || | |||
|- | |||
| 2 || CAN2 low || | |||
|- | |||
| 3 || CAN2 high || | |||
|- | |||
| 4 || Ground || | |||
|- | |||
| 5 || CAN1 high || | |||
|- | |||
| 6 || Power || 9-24v @ 1A max current | |||
|} | |||
==Single analog/digital channel== | ==Single analog/digital channel== | ||
* Connector: M8 3P, A coding | |||
[[file:M8_3P_male_connector.png]] | |||
''Male connector pictured'' | |||
{| class="wikitable" | |||
|- | |||
! Pin !! Connection !! Notes | |||
|- | |||
| 1 || Ground || Brown | |||
|- | |||
| 3 || Power || 5v @ 1A max | |||
|- | |||
| 4 || Signal || | |||
|} | |||
==Quad analog/digital channels== | ==Quad analog/digital channels== | ||
* Connector: M8 8P Male, A coding | |||
[[file:M8_8P_male_pinout.jpg|200px]] | |||
{| class="wikitable" | |||
|- | |||
! Pin !! Connection !! Notes | |||
|- | |||
| 1 || Analog/Digital 1 || | |||
|- | |||
| 2 || Analog/Digital 2 || | |||
|- | |||
| 3 || Analog/Digital 4 || | |||
|- | |||
| 4 || Vref || 5v @ 1A max current, combined with pin 6 | |||
|- | |||
| 5 || Ground || | |||
|- | |||
| 6 || Vref || 5v @ 1A max current, combined with pin 4 | |||
|- | |||
| 7 || Analog/Digital 3 || | |||
|- | |||
| 8 || Ground || | |||
|} | |||
= | ==Octo analog/digital channels== | ||
* Connector: M8 12P, A coding | |||
[[file:M12_12P_male_connector.png]] | |||
''Male connector pictured'' | |||
{| class="wikitable" | |||
|- | |||
! Pin !! Connection !! Notes | |||
|- | |||
| 1 || Analog/Digital 1B || | |||
|- | |||
| 2 || Analog/Digital 2B || | |||
|- | |||
| 3 || Analog/Digital 4B || | |||
|- | |||
| 4 || Analog/Digital 1A || | |||
|- | |||
| 5 || Analog/Digital 2A || | |||
|- | |||
| 6 || Vref || 5v @ 1A | |||
|- | |||
| 7 || Analog/Digital 3A || | |||
|- | |||
| 8 || Analog/Digital 4A || | |||
|- | |||
| 9 || Analog/Digital 3B || | |||
|- | |||
| 10 || Ground || | |||
|- | |||
| 11 || Ground || | |||
|- | |||
| 12 || Ground || | |||
|} | |||
=Available cabling= | |||
==CAN extension cables== | ==CAN extension cables== | ||
Each CAN extension cable includes a M8 male to M8 female connector. Power rated at 1A (12watts at 12v) | Each CAN extension cable includes a M8 male to M8 female connector. Power rated at 1A (12watts at 12v) | ||
Line 24: | Line 136: | ||
! Orderable SKU !! Description | ! Orderable SKU !! Description | ||
|- | |- | ||
| | | ASL_M8_CAN_EXT_0.5M || 0.5 meter CAN extension cable | ||
|- | |||
| ASL_M8_CAN_EXT_1M || 1 meter CAN extension cable | |||
|- | |- | ||
| | | ASL_M8_CAN_EXT_2M || 2 meter CAN extension cable | ||
|- | |- | ||
| | | ASL_M8_CAN_EXT_3M || 3 meter CAN extension cable | ||
|- | |- | ||
| | | ASL_M8_CAN_EXT_4M || 4 meter CAN extension cable | ||
|} | |} | ||
==CAN | ==CAN splitter== | ||
The CAN | The CAN splitter/y-adapter splits a single CAN bus so a device can be inserted within a loop. | ||
The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two | * '''Note''': stub length to devices should be 300mm maximum, including length of Y adapter branch. | ||
The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two 10cm connections with M8 4P female connectors on each end, wired in parallel to the feed input. | |||
{| class="wikitable" | {| class="wikitable" | ||
Line 45: | Line 161: | ||
|} | |} | ||
==M8 CAN | ==M8 Power + CAN pigtail== | ||
Used as a primary power + single CAN bus connection | Used as a primary power + single CAN bus connection to enable a one cable power + data solution to the Dual CAN hub or RaceCapture. | ||
M8 4P male on one end, pigtails on the other. | M8 4P male on one end, pigtails on the other. | ||
Line 56: | Line 172: | ||
| ASL_POWER_CAN_PIGTAIL_2M || Power + CAN pigtail, 2 meter | | ASL_POWER_CAN_PIGTAIL_2M || Power + CAN pigtail, 2 meter | ||
|} | |} | ||
===Pinout=== | |||
* Red / Pin 2: +12v | |||
* Black / Pin 4: Ground | |||
* White / Pin 1: CAN Low | |||
* Green / Pin 3: CAN High | |||
==M8 Power + CAN device pigtail== | |||
Used to provide power + CAN to a CAN device such as AnalogX, TireX, etc. for a '''non plug and play installation''', such as custom-wired application. | |||
* '''Note''' For a plug and play installation, use the [[Harness_specifications#CAN_extension_cables|CAN extension cables]] to integrate with the CAN. | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_DEVICE_CAN_PIGTAIL_1M || Power + CAN pigtail for individual devices, 1 meter | |||
|} | |||
===Pinout=== | |||
* Red / Pin 2: +12v | |||
* Black / Pin 4: Ground | |||
* White / Pin 1: CAN Low | |||
* Green / Pin 3: CAN High | |||
==Dual CAN interconnect (RJ45)== | ==Dual CAN interconnect (RJ45)== | ||
Line 64: | Line 202: | ||
! Orderable SKU !! Description | ! Orderable SKU !! Description | ||
|- | |- | ||
| | | ASL_DUAL_CAN_RJ45_M8_1M || Dual CAN RJ45 to M8 6P male, 1 meter | ||
|} | |} | ||
Line 74: | Line 212: | ||
! Orderable SKU !! Description | ! Orderable SKU !! Description | ||
|- | |- | ||
| | | ASL_DUAL_CAN_M8_1M || Dual CAN M8 6P male to M8 6P male, 1 meter | ||
|} | |||
==Inline CAN terminator== | |||
Single channel 120 ohm terminator designed to insert inline into a harness. Consists of a compact M8 4P male to M8 4P female. | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_CAN_TERMINATOR || Inline CAN terminator, M8 4P | |||
|} | |||
=Analog/Digital cabling= | |||
==Sensor Pigtail== | |||
The sensor pigtail consists of a M8 3P Male to prepared ends, with 24 AWG conductors. | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_M8_SENSOR_PIGTAIL_2M || M8 3P to bare wire sensor pigtail, 2M, 24 AWG | |||
|} | |||
==Sensor Extension Cable== | |||
Extends an analog sensor connection. Cable consists of an M8 3P male to M8 3P female connection. | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_M8_SENSOR_EXTENSION_1M || M8 3P sensor extension cable, 1 meter | |||
|- | |||
| ASL_M8_SENSOR_EXTENSION_2M || M8 3P sensor extension cable, 2 meter | |||
|- | |||
| ASL_M8_SENSOR_EXTENSION_3M || M8 3P sensor extension cable, 3 meter | |||
|- | |||
| ASL_M8_SENSOR_EXTENSION_4M || M8 3P sensor extension cable, 4 meter | |||
|} | |||
==Quad analog/digital sensor splitter== | |||
Splits 4 analog/digital channels to individual sensors. | |||
Feed input is a 15cm feed to an M8 8P male connector. Each split channel is on a 15cm stub, with M8 3P female connector | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_4X_SENSOR_SPLITTER || 4X analog / digital sensor splitter | |||
|} | |||
==Quad Sensor to bare wires pigtail== | |||
Provides a bare wire pigtail for 4x analog/digital sensors, suitable for '''non plug and play''' installations for AnalogX/GPIOx, etc. | |||
* '''Note''' For plug and play installations, use a combination of the quad analog/digital sensor splitter, extension cables and plug and play sensors. | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_M8_QUAD_SENSOR_PIGTAIL_1M || M8 8P male to bare wire quad sensor pigtail, 1M, 24AWG | |||
|} | |||
===Pinout=== | |||
* White / Pin 1 : Analog/Digital 1 | |||
* Yellow / Pin 2 : Analog/Digital 2 | |||
* Gray / Pin 3 : Analog/Digital 4 | |||
* Red / Pin 4 : 5v reference | |||
* Brown / Pin 5 : Ground | |||
* Pink / Pin 6 : 5v reference | |||
* Blue / Pin 7 : Analog/Digital 3 | |||
* Green / Pin 8 : Ground | |||
==Delphi GT150 sensor interconnect== | |||
Connects a single Analog channel to a Delphi GT150 sensor connection. | |||
* Typically used for pressure sensors. Compatible with 10 and 150 bar Autosport Labs sensors. | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_DELPHI3_M8 || Delphi GT150 3 pin to M8, 2 meters | |||
|} | |||
==Autosport Labs Linear temperature sensor== | |||
Connects a single analog channel to the Autosport Labs linear temperature sensor. | |||
* '''Note''' - sensor is integrated into the end of the cable | |||
{| class="wikitable" | |||
|- | |||
! Orderable SKU !! Description | |||
|- | |||
| ASL_LINEAR_TEMP_M8 || Autosport Labs linear temperature to M8, 2 meters | |||
|} | |} |
Revision as of 16:59, 27 January 2021
Standardized Connections
The following represents the new standard starting in 2020 for power, CAN, and analog/digital signaling
Connector / Signaling Standard
Interconnects are based on industry-standard M8 and M12 connectors
Power + CAN Single interconnect
- Connector: M8 4P, A coding
Male connector pictured
Pin | Connection | Notes |
---|---|---|
1 | CAN low | |
2 | Power | Red, 12-14v / 1A (~12W) |
3 | CAN high | |
4 | Ground | Black |
Power is standard automotive 12-14v (nominal).
The M8 is an industry standard connector; field-wireable connectors for the M8 4P and other variants are available from 3rd parties:
- Male: Straight | Right angle
- Female: Straight | Right angle
Dual CAN + power interconnect
- Connector: M8 6P, A coding
Male connector pictured
Pin | Connection | Notes |
---|---|---|
1 | CAN1 low | |
2 | CAN2 low | |
3 | CAN2 high | |
4 | Ground | |
5 | CAN1 high | |
6 | Power | 9-24v @ 1A max current |
Single analog/digital channel
- Connector: M8 3P, A coding
Male connector pictured
Pin | Connection | Notes |
---|---|---|
1 | Ground | Brown |
3 | Power | 5v @ 1A max |
4 | Signal |
Quad analog/digital channels
- Connector: M8 8P Male, A coding
Pin | Connection | Notes |
---|---|---|
1 | Analog/Digital 1 | |
2 | Analog/Digital 2 | |
3 | Analog/Digital 4 | |
4 | Vref | 5v @ 1A max current, combined with pin 6 |
5 | Ground | |
6 | Vref | 5v @ 1A max current, combined with pin 4 |
7 | Analog/Digital 3 | |
8 | Ground |
Octo analog/digital channels
- Connector: M8 12P, A coding
Male connector pictured
Pin | Connection | Notes |
---|---|---|
1 | Analog/Digital 1B | |
2 | Analog/Digital 2B | |
3 | Analog/Digital 4B | |
4 | Analog/Digital 1A | |
5 | Analog/Digital 2A | |
6 | Vref | 5v @ 1A |
7 | Analog/Digital 3A | |
8 | Analog/Digital 4A | |
9 | Analog/Digital 3B | |
10 | Ground | |
11 | Ground | |
12 | Ground |
Available cabling
CAN extension cables
Each CAN extension cable includes a M8 male to M8 female connector. Power rated at 1A (12watts at 12v)
Orderable SKU | Description |
---|---|
ASL_M8_CAN_EXT_0.5M | 0.5 meter CAN extension cable |
ASL_M8_CAN_EXT_1M | 1 meter CAN extension cable |
ASL_M8_CAN_EXT_2M | 2 meter CAN extension cable |
ASL_M8_CAN_EXT_3M | 3 meter CAN extension cable |
ASL_M8_CAN_EXT_4M | 4 meter CAN extension cable |
CAN splitter
The CAN splitter/y-adapter splits a single CAN bus so a device can be inserted within a loop.
- Note: stub length to devices should be 300mm maximum, including length of Y adapter branch.
The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two 10cm connections with M8 4P female connectors on each end, wired in parallel to the feed input.
Orderable SKU | Description |
---|---|
ASL_CAN_SPLITTER | Single channel CAN splitter |
M8 Power + CAN pigtail
Used as a primary power + single CAN bus connection to enable a one cable power + data solution to the Dual CAN hub or RaceCapture.
M8 4P male on one end, pigtails on the other.
Orderable SKU | Description |
---|---|
ASL_POWER_CAN_PIGTAIL_2M | Power + CAN pigtail, 2 meter |
Pinout
- Red / Pin 2: +12v
- Black / Pin 4: Ground
- White / Pin 1: CAN Low
- Green / Pin 3: CAN High
M8 Power + CAN device pigtail
Used to provide power + CAN to a CAN device such as AnalogX, TireX, etc. for a non plug and play installation, such as custom-wired application.
- Note For a plug and play installation, use the CAN extension cables to integrate with the CAN.
Orderable SKU | Description |
---|---|
ASL_DEVICE_CAN_PIGTAIL_1M | Power + CAN pigtail for individual devices, 1 meter |
Pinout
- Red / Pin 2: +12v
- Black / Pin 4: Ground
- White / Pin 1: CAN Low
- Green / Pin 3: CAN High
Dual CAN interconnect (RJ45)
Designed to link RaceCapture/Pro MK2,MK3 and RaceCapture Track MK1/MK2 to powered dual CAN hub
- RJ45 to M8 6P male, 1 meter length
Orderable SKU | Description |
---|---|
ASL_DUAL_CAN_RJ45_M8_1M | Dual CAN RJ45 to M8 6P male, 1 meter |
Dual CAN interconnect
Interconnect designed to link powered dual CAN hub
- M8 6P male to M8 6P male, 1 meter length
Orderable SKU | Description |
---|---|
ASL_DUAL_CAN_M8_1M | Dual CAN M8 6P male to M8 6P male, 1 meter |
Inline CAN terminator
Single channel 120 ohm terminator designed to insert inline into a harness. Consists of a compact M8 4P male to M8 4P female.
Orderable SKU | Description |
---|---|
ASL_CAN_TERMINATOR | Inline CAN terminator, M8 4P |
Analog/Digital cabling
Sensor Pigtail
The sensor pigtail consists of a M8 3P Male to prepared ends, with 24 AWG conductors.
Orderable SKU | Description |
---|---|
ASL_M8_SENSOR_PIGTAIL_2M | M8 3P to bare wire sensor pigtail, 2M, 24 AWG |
Sensor Extension Cable
Extends an analog sensor connection. Cable consists of an M8 3P male to M8 3P female connection.
Orderable SKU | Description |
---|---|
ASL_M8_SENSOR_EXTENSION_1M | M8 3P sensor extension cable, 1 meter |
ASL_M8_SENSOR_EXTENSION_2M | M8 3P sensor extension cable, 2 meter |
ASL_M8_SENSOR_EXTENSION_3M | M8 3P sensor extension cable, 3 meter |
ASL_M8_SENSOR_EXTENSION_4M | M8 3P sensor extension cable, 4 meter |
Quad analog/digital sensor splitter
Splits 4 analog/digital channels to individual sensors.
Feed input is a 15cm feed to an M8 8P male connector. Each split channel is on a 15cm stub, with M8 3P female connector
Orderable SKU | Description |
---|---|
ASL_4X_SENSOR_SPLITTER | 4X analog / digital sensor splitter |
Quad Sensor to bare wires pigtail
Provides a bare wire pigtail for 4x analog/digital sensors, suitable for non plug and play installations for AnalogX/GPIOx, etc.
- Note For plug and play installations, use a combination of the quad analog/digital sensor splitter, extension cables and plug and play sensors.
Orderable SKU | Description |
---|---|
ASL_M8_QUAD_SENSOR_PIGTAIL_1M | M8 8P male to bare wire quad sensor pigtail, 1M, 24AWG |
Pinout
- White / Pin 1 : Analog/Digital 1
- Yellow / Pin 2 : Analog/Digital 2
- Gray / Pin 3 : Analog/Digital 4
- Red / Pin 4 : 5v reference
- Brown / Pin 5 : Ground
- Pink / Pin 6 : 5v reference
- Blue / Pin 7 : Analog/Digital 3
- Green / Pin 8 : Ground
Delphi GT150 sensor interconnect
Connects a single Analog channel to a Delphi GT150 sensor connection.
- Typically used for pressure sensors. Compatible with 10 and 150 bar Autosport Labs sensors.
Orderable SKU | Description |
---|---|
ASL_DELPHI3_M8 | Delphi GT150 3 pin to M8, 2 meters |
Autosport Labs Linear temperature sensor
Connects a single analog channel to the Autosport Labs linear temperature sensor.
- Note - sensor is integrated into the end of the cable
Orderable SKU | Description |
---|---|
ASL_LINEAR_TEMP_M8 | Autosport Labs linear temperature to M8, 2 meters |