Harness specifications: Difference between revisions

Line 83: Line 83:
==CAN+power for device==
==CAN+power for device==
M8-4P female to pigtail for a custom-wired non Plug and Play connection to one of our CAN bus enabled devices such as TireX, AnalogX2, or ShiftX3 [https://www.autosportlabs.com/product/can-power-pigtail-for-device/ Product Info]
M8-4P female to pigtail for a custom-wired non Plug and Play connection to one of our CAN bus enabled devices such as TireX, AnalogX2, or ShiftX3 [https://www.autosportlabs.com/product/can-power-pigtail-for-device/ Product Info]
Pinout:
* Red / Pin 2: +12v
* Black / Pin 4: Ground
* White / Pin 1: CAN Low
* Green / Pin 3: CAN High


[[image:ASL_DEVICE_CAN_PIGTAIL_1M_diagram.jpg]]
[[image:ASL_DEVICE_CAN_PIGTAIL_1M_diagram.jpg]]

Revision as of 17:42, 14 September 2022

Plug and Play harness system

Jump to the Analog/Digital Harness system

CAN bus Harness

The plug and play CAN bus harness system lets you easily connect CAN bus devices to your RaceCapture or PodiumConnect system, without the need to splice, crimp, or heat-shrink connections. Multiple-length extension cables lets you build a harness that perfectly matches your installation needs.

Click on the items within the image to see details.

Subtitle of Image Map combined_CAN_harnesses.jpg
About this image

Analog harness

The plug and play Analog/Digital harness system lets you easily connect individual sensors to your RaceCapture system, without the need to splice, crimp, or heat shrink connections. Multiple-length extension cables for each stage of the harness lets you build a harness that perfectly matches your installation needs.

Click on the items within the image to see details.

Subtitle of Image Map combined_analog_harnesses.jpg
About this image

CAN bus harness components

Dual CAN splitter

M8-6P male to dual M8-4P female splits CAN1/CAN2 into individual CAN1 and CAN2 connections. Product Info

ASL DUAL CAN SPLITTER diagram.jpg

ASL DUAL CAN SPLITTER.jpg

CAN extension

M8-4P male to M8-4P female cable extends a CAN bus network. Available in 0.5, 1, 2, 3, and 4 meter lengths. Product Info

  • Power rated at 1A (12watts at 12v)

ASL M8 CAN EXT 0.5M 1M 2M 3M 4M diagram.jpg

CAN extension cable.jpg

CAN splitter

M8-4P male to dual M8-4P splits a single CAN bus so a device can be inserted in the middle of a CAN bus network.

  • Note: stub length to devices should be about 300mm maximum, including length of Y adapter branch.

The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two 10cm connections with M8 4P female connectors on each end, wired in parallel.

ASL CAN SPLITTER diagram.jpg

Can splitter y adapter.jpg

Inline CAN terminator

M8-4P male to M8-4P female inline 120 ohm CAN terminator - place one near end of the CAN bus network to ensure signal integrity. Product Info

ASL CAN TERMINATOR diagram.jpg

Inline can terminator.jpg

Power+CAN pigtail

M8-4P male to pigtail for connecting custom device to the Plug and Play cabling system, or for powering a RaceCapture or PodiumConnect system. 2 meter length. Product Info

Pinout:

  • Red / Pin 2: +12v
  • Black / Pin 4: Ground
  • White / Pin 1: CAN Low
  • Green / Pin 3: CAN High

ASL POWER CAN PIGTAIL 2M diagram.jpg

CAN power pigtail.jpg

CAN+power for device

M8-4P female to pigtail for a custom-wired non Plug and Play connection to one of our CAN bus enabled devices such as TireX, AnalogX2, or ShiftX3 Product Info

Pinout:

  • Red / Pin 2: +12v
  • Black / Pin 4: Ground
  • White / Pin 1: CAN Low
  • Green / Pin 3: CAN High

ASL DEVICE CAN PIGTAIL 1M diagram.jpg

ASL DEVICE CAN PIGTAIL 1M.jpg

Analog / Digital harness components

8 channel extension

Male to Female M12 12P cable extends 8 analog or digital channels. Available in 1 or 2 meter lengths. View Product

ASL M12 OCTO SENSOR EXTENSION 1M 2M diagram.jpg

ASL M12 OCTO SENSOR EXTENSION 1M 2M 1024.jpg

8 to 4 channel splitter

M12-12P male to dual M8-8P female connector splits 8 analog or digital channels into dual 4 channel connections. Product Info

ASL OCTO SENSOR SPLITTER diagram.jpg

ASL OCTO SENSOR SPLITTER 1024.jpg

8 channel pigtail

M12-12P 0.3 meter male pigtail breaks out 8 analog or digital channels. Product Info

ASL M12 OCTO SENSOR PIGTAIL 0.3M diagram.jpg

ASL M12 OCTO SENSOR PIGTAIL 0.3M 1024.jpg

4 channel extension

M8-4P male to M8-4P female cable extends 4 analog or digital channels. Available in 1 and 2 meter lengths. Product Info

ASL M8 QUAD SENSOR EXTENSION 1M 2M diagram.jpg

ASL M8 QUAD SENSOR EXTENSION 1M 2M 1024.jpg

4 channel pigtail

M8-8P male pigtail for 4 analog or digital channels. 1 meter length. Product Info

ASL M8 QUAD SENSOR PIGTAIL 1M diagram.jpg

ASL M8 QUAD SENSOR PIGTAIL 1M.jpg

4 channel splitter

M8-8P Male splits 4 analog or digital channels into 4 M8-3P female connections. Product Info

ASL QUAD SENSOR SPLITTER diagram.jpg

ASL QUAD SENSOR SPLITTER.jpg

Single channel extension

M8-3P male to M3-3P female extends a single analog or digital channel. Available in 1, 2, 3, and 4 meter lengths. Product Info

ASL M8 SENSOR EXTENSION 1M 2M 3M 4M diagram.jpg

ASL M8 SENSOR EXTENSION 1M 2M 3M 4M.jpg

Single channel pigtail

M8-3P male pigtail for a single analog or digital connection. 2 meter length. Product Info

ASL M8 SENSOR PIGTAIL 2M diagram.jpg

ASL M8 SENSOR PIGTAIL 2M.jpg

Pressure sensor

M8-3P male to 3 pin Delphi GT150 pressure sensor connector. 2 meter length. 10 bar/150 PSI Product Info 150 bar/2175 PSI Product Info

ASL DELPHI3 M8 diagram.jpg

ASL DELPHI3 M8 pressure sensor.jpg

Linear temperature sensor

M8-3P male to linear temperature sensor. 2 meter length. Product Info

ASL LINEAR TEMP M8 diagram.jpg

ASL LINEAR TEMP M8.jpg

Standard connectors and pinouts

The following represents connector and pinout standard for power, CAN, and analog/digital signaling

Interconnects are based on industry-standard M8 and M12 connectors

Power + CAN Single interconnect

  • Connector: M8 4P, A coding

M8 4P male pinout.jpg

Male connector pictured

Pin Connection Notes
1 CAN low White
2 Power Red, 9-24v / 1A (~12W)
3 CAN high Green
4 Ground Black

Power is standard automotive 12-14v (nominal).

The M8 is an industry standard connector; field-wireable connectors for the M8 4P and other variants are available from 3rd parties:

Dual CAN + power interconnect

  • Connector: M8 6P, A coding

M8 6P male connector.png

Male connector pictured

Pin Connection Notes
1 CAN1 low
2 CAN2 low
3 CAN2 high
4 Ground
5 CAN1 high
6 Power 9-24v / 1A (~12W)

Single analog/digital channel

  • Connector: M8 3P, A coding

M8 3P male connector.png

Male connector pictured

Pin Connection Notes
1 Ground Brown
3 Power Blue (5v @ 1A max)
4 Signal Black

Quad analog/digital channels

  • Connector: M8 8P Male, A coding

M8 8P male pinout.jpg

Pin Connection Notes
1 Analog/Digital 1
2 Analog/Digital 2
3 Analog/Digital 4
4 Vref 5v @ 1A max current, combined with pin 6
5 Ground
6 Vref 5v @ 1A max current, combined with pin 4
7 Analog/Digital 3
8 Ground

Octo analog/digital channels

  • Connector: M8 12P, A coding

M12 12P male connector.png

Male connector pictured

Pin Connection Analog Mapping Digital Mapping
1 Analog/Digital B1 Analog 5 GPIO 1
2 Analog/Digital B2 Analog 6 GPIO 2
3 Analog/Digital B4 Analog 8 GPIO 4
4 Analog/Digital A1 Analog 1 Timer/RPM 1
5 Analog/Digital A2 Analog 2 Timer/RPM 2
6 Vref 5v @ 0.5A 5v @ 0.5A
7 Analog/Digital A3 Analog 3 Timer/RPM 3
8 Analog/Digital A4 Analog 4 Timer/RPM 4
9 Analog/Digital B3 Analog 7 GPIO 3
10 Ground
11 Ground
12 Ground

Available cabling

CAN extension cables

Each CAN extension cable includes a M8 male to M8 female connector. Power rated at 1A (12watts at 12v)

Orderable SKU Description
ASL_M8_CAN_EXT_0.5M 0.5 meter CAN extension cable
ASL_M8_CAN_EXT_1M 1 meter CAN extension cable
ASL_M8_CAN_EXT_2M 2 meter CAN extension cable
ASL_M8_CAN_EXT_3M 3 meter CAN extension cable
ASL_M8_CAN_EXT_4M 4 meter CAN extension cable

CAN splitter

The CAN splitter/y-adapter splits a single CAN bus so a device can be inserted within a loop.

  • Note: stub length to devices should be 300mm maximum, including length of Y adapter branch.

The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two 10cm connections with M8 4P female connectors on each end, wired in parallel to the feed input.

Orderable SKU Description
ASL_CAN_SPLITTER Single channel CAN splitter

M8 Power + CAN pigtail

Used as a primary power + single CAN bus connection to enable a one cable power + data solution to the Dual CAN hub or RaceCapture.

M8 4P male on one end, pigtails on the other.

Orderable SKU Description
ASL_POWER_CAN_PIGTAIL_2M Power + CAN pigtail, 2 meter

Pinout

  • Red / Pin 2: +12v
  • Black / Pin 4: Ground
  • White / Pin 1: CAN Low
  • Green / Pin 3: CAN High

M8 Power + CAN device pigtail

Used to provide power + CAN to a CAN device such as AnalogX, TireX, ShiftX3, etc. for a non plug and play installation, such as custom-wired application.

Orderable SKU Description
ASL_DEVICE_CAN_PIGTAIL_1M Power + CAN pigtail for individual devices, 1 meter

Pinout

  • Red / Pin 2: +12v
  • Black / Pin 4: Ground
  • White / Pin 1: CAN Low
  • Green / Pin 3: CAN High

Dual CAN interconnect (RJ45)

Designed to link RaceCapture/Pro MK2,MK3 and RaceCapture Track MK1/MK2 to powered dual CAN hub

  • RJ45 to M8 6P male, 1 meter length
Orderable SKU Description
ASL_DUAL_CAN_RJ45_M8_1M Dual CAN RJ45 to M8 6P male, 1 meter

Dual CAN interconnect

Interconnect designed to link powered dual CAN hub

  • M8 6P male to M8 6P male, 1 meter length
Orderable SKU Description
ASL_DUAL_CAN_M8_1M Dual CAN M8 6P male to M8 6P male, 1 meter

Inline CAN terminator

Single channel 120 ohm terminator designed to insert inline into a harness. Consists of a compact M8 4P male to M8 4P female.

Orderable SKU Description
ASL_CAN_TERMINATOR Inline CAN terminator, M8 4P

Analog/Digital cabling

Sensor Pigtail

The sensor pigtail consists of a M8 3P Male to prepared ends, with 24 AWG conductors.

Orderable SKU Description
ASL_M8_SENSOR_PIGTAIL_2M M8 3P to bare wire sensor pigtail, 2M, 24 AWG

Sensor Extension Cable

Extends an analog sensor connection. Cable consists of an M8 3P male to M8 3P female connection.

Orderable SKU Description
ASL_M8_SENSOR_EXTENSION_1M M8 3P sensor extension cable, 1 meter
ASL_M8_SENSOR_EXTENSION_2M M8 3P sensor extension cable, 2 meter
ASL_M8_SENSOR_EXTENSION_3M M8 3P sensor extension cable, 3 meter
ASL_M8_SENSOR_EXTENSION_4M M8 3P sensor extension cable, 4 meter

Quad analog/digital sensor splitter

Splits 4 analog/digital channels to individual sensors.

Feed input is a 15cm feed to an M8 8P male connector. Each split channel is on a 15cm stub, with M8 3P female connector

Orderable SKU Description
ASL_4X_SENSOR_SPLITTER 4X analog / digital sensor splitter

Quad Sensor to bare wires pigtail

Provides a bare wire pigtail for 4x analog/digital sensors, suitable for non plug and play installations for AnalogX/GPIOx, etc.

  • Note For plug and play installations, use a combination of the quad analog/digital sensor splitter, extension cables and plug and play sensors.
Orderable SKU Description
ASL_M8_QUAD_SENSOR_PIGTAIL_1M M8 8P male to bare wire quad sensor pigtail, 1M, 24AWG

Pinout

  • White / Pin 1 : Analog/Digital 1
  • Yellow / Pin 2 : Analog/Digital 2
  • Gray / Pin 3 : Analog/Digital 4
  • Red / Pin 4 : 5v reference
  • Brown / Pin 5 : Ground
  • Pink / Pin 6 : 5v reference
  • Blue / Pin 7 : Analog/Digital 3
  • Green / Pin 8 : Ground

Delphi GT150 sensor interconnect

Connects a single Analog channel to a Delphi GT150 sensor connection.

  • Typically used for pressure sensors. Compatible with 10 and 150 bar Autosport Labs sensors.
Orderable SKU Description
ASL_DELPHI3_M8 Delphi GT150 3 pin to M8, 2 meters

Autosport Labs Linear temperature sensor

Connects a single analog channel to the Autosport Labs linear temperature sensor.

  • Note - sensor is integrated into the end of the cable
Orderable SKU Description
ASL_LINEAR_TEMP_M8 Autosport Labs linear temperature to M8, 2 meters