PodiumConnect: Difference between revisions

Line 14: Line 14:
===Windows / OSX===
===Windows / OSX===
* Connect your PodiumConnect to your computer with the USB cable,  
* Connect your PodiumConnect to your computer with the USB cable,  
** If you are running Windows older than Windows 10, please install the USB driver, available from the [https://podium.live/software Software Downloads page]
* Start the RaceCapture app.   
* Start the RaceCapture app.   
* The RaceCapture app will launch the first time setup wizard.  
* The RaceCapture app will launch the first time setup wizard.


===Android / iOS===
===Android / iOS===

Revision as of 14:53, 13 February 2019

Getting Started

PodiumConnect Quickstart flyer.jpg

Installing the app

Windows / OSX

Get the latest version of the RaceCapture app from the downloads page

Android / iOS

Google play.jpgItunes app store.jpgAmazon app store.jpg

Running and Connection

Windows / OSX

  • Connect your PodiumConnect to your computer with the USB cable,
    • If you are running Windows older than Windows 10, please install the USB driver, available from the Software Downloads page
  • Start the RaceCapture app.
  • The RaceCapture app will launch the first time setup wizard.

Android / iOS

  • Power up PodiumConnect with 12v or via USB power (computer or USB power source)
  • Go to your device's WiFi settings, and connect to the PodiumConnect WiFi access point.
    • Note, the WiFi Access Point is open, with no password - you can set a password and encryption later under Setup.
  • Start the RaceCapture app.
  • The RaceCapture app will launch the first time setup wizard.

First time setup wizard

The first time setup wizard will guide you through the essential setup of your PodiumConnect

RaceCapture app setup wizard.jpg

Verifying Connectivity

  • Select your device and verify the RaceCapture app connects.

RaceCapture app PodiumConnect connection screen.jpg


Select your Preset configuration

  • Select the preset configuration matching the data system you have.

RaceCapture app PodiumConnect AIM preset selection.jpg

Select your favorite Tracks

  • Select the tracks you will typically race at so PodiumConnect can detect the track location and calculate lap times.
  • This is an important step to ensure you get valid data and lap times for your telemetry session.
  • Note: Only select the one track configuration per race track, to ensure the correct track is auto-selected.
  • If you don't see your track listed, please submit your track!

RaceCapture app select favorite tracks.jpg

Create an account on Podium & Setting Device ID

  • Create an account on Podium http://podium.live - then follow the steps to create a Device. Make a note of the Device ID provided, so you can enter it into the wizard.

RaceCapture app setup podium.jpg

Select your cell provider

  • Enable the cellular connection and select your cellular provider.
    • Note: If your cellular provider is not in the list, select the custom option and set the APN settings provided by your cellular carrier.

RaceCapture app select cell service.jpg

Freedom Pop

If you have a FreedomPop card, activate your card on the FreedomPop activation website

Further Setup

The settings made in the first time setup can also be accessed via the Setup view of the RaceCapture app.

  • Note To re-run the first time setup, launch the RaceCapture app without a connection to the device, go to the setup screen and press the First Time Setup button.

Connecting your Data System

Minimum Data required for proper operation

At minimum, PodiumConnect requires the following data from your data system:

  • Speed
  • GPS data
    • Latitude
    • Longitude

These channels allow PodiumConnect to calculate lap timing, which creates the context for analysing additional sensor data, such as temperatures, TPS, RPM, oil pressure and so on.

  • Important: Without these channels, telemetry will not work properly.

Data System Integration Guides

Use the provided integration cable and connect it to your data system.

Follow the guide for your specific system:

Hardware integration / custom cable

The main connector on PodiumConnect is a standard Molex MiniFit Jr connector.

  • Plug Housing: Molex Mini Fit Jr. (8 position) 0039012080
  • Compatible Pins: Molex 39000039

Adjusting your Channel Mappings

You may need to adjust or remove unused channels loaded by the preset.

  • Navigate to Setup / CAN Mapping screen.
  • Remove or adjust channels as appropriate.
  • Press "Write" to write the settings to PodiumConnect

Testing Telemetry

Install your SIM card

PodiumConnect SIM card.jpg

  • On the rear of the unit, pop the SIM card drawer out of the unit by pressing the ejector button with a ball point pen.
  • Install the SIM card into the tray, with the gold contacts facing up.
  • Slide the SIM card tray back into the drawer, ensuring you engage the drawer slot carefully. Press gently until the drawer seats.

Verifying

  • Power up PodiumConnect and attach the cellular antenna. Torque the antenna just beyond finger-tight (do not overtighten). 4-6 inch/lbs.
  • Watch the telemetry LED on the front of the unit. When it begins to flash regularly, this means telemetry is broadcasting.
  • Open your Podium account and navigate to http://podium.live/home
  • Refresh this page when telemetry is broadcasting; you will see an Ad Hoc event listed.
  • Click this link, which brings you to a page showing all devices at the event. (yours will be the only one).
  • Click the name of your device. This will show the main race dashboard page.
  • Here, you will see live data flowing from PodiumConnect.

Installing the unit

Install PodiumConnect in the passenger compartment, in an area that's protected from moisture and temperature extremes. A good location is an area that offers reasonable access to the unit to observe status LEDs,

  • Note Mounting orientation does not matter.

Installing the cellular antenna

Install the cellular antenna on the roof of the vehicle in a location as far away from receiving antennas as reasonably possible - e.g. opposite side of the roof from the GPS antenna.

RaceCapture Pro MK3 antenna install.png

Temporary alternative (reduced performance): You can also install the antenna to the windshield using a suction cup, or in the passenger compartment using zip ties, ensuring the antenna body of the antenna is 8" separated from metal structures.

Using Podium

Visit the guide on using Podium, which includes a video tour of the essential features.

Podium telemetry dashboard animated.gif
Podium telemetry chart averages.gif

Additional Guides and How-Tos

Guides

How To