RCP stimulator

Revision as of 02:25, 6 January 2019 by Brentp (talk | contribs) (Created page with " ==RS232 serial output== The stimulator will output the current Analog channel data on the serial port. ===Baud Rate=== Baud rate is 115200, 8N1 ===Format=== The output f...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


RS232 serial output

The stimulator will output the current Analog channel data on the serial port.

Baud Rate

Baud rate is 115200, 8N1

Format

The output format is CSV with the following columns:

  • Timestamp in milliseconds
  • Channel 1 value (0-10000)
  • Channel 2 value (0-10000)
  • Channel 3 value (0-10000)
  • Channel 4 value (0-10000)

Example output

38817 ,0,0,0,0
39017 ,0,0,0,0
39217 ,0,0,0,0
39417 ,0,0,0,0
39617 ,0,0,0,0
39817 ,0,0,0,0
40017 ,0,0,0,0
40217 ,0,0,0,0
40417 ,0,0,0,0
40617 ,0,0,0,0
40817 ,0,0,0,0
41017 ,302,0,0,0
41217 ,1110,0,0,0
41417 ,1940,0,0,0
41617 ,1943,0,0,0
41817 ,1943,0,0,0
42017 ,1940,0,0,0
42217 ,1942,717,0,0
42417 ,1935,1321,0,0
42617 ,1935,1363,0,0
42817 ,1938,1363,0,0
43017 ,1940,1363,0,0
43217 ,1937,1362,795,0
43417 ,1938,1360,1478,0
43617 ,1939,1362,1473,0
43817 ,1938,1360,1477,0
44017 ,1937,1358,1477,0
44217 ,1938,1360,1476,513
44417 ,1934,1359,1477,1482
44617 ,1938,1360,1474,1489