RaceCapture-Pro MK2: Difference between revisions

No edit summary
(45 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=RaceCapture/Pro Quick Links=
=RaceCapture/Pro Quick Links=
* [[Image:add_to_cart.png|link=http://www.autosportlabs.com/racecapturepro-2/]]
* [[Image:add_to_cart.png|link=https://www.autosportlabs.com/racecapture_mk3_apex/]]


==Getting Started==
==Getting Started==
*'''[[RaceCapturePro2_QuickStart|First time setup]]'''
*'''[[RaceCapturePro2_QuickStart|First time setup]]'''
*'''[[RaceCapturePro_Downloads|Software Downloads]]'''
*'''[[RaceCapturePro2_Hardware_Install|Hardware install]]'''
*'''[[RaceCapturePro2_TelemetryQuickstart|Live-streaming telemetry]]'''


*'''[[RaceCapturePro2_OBD2|How to: enable OBD2 channels]]'''
==User Guides==
*'''[[RaceCapturePro2_Calibrate_Sensor|How to: calibrate and configure an analog sensor]]'''
*[[RCP_CAN|CAN bus / ECU integration guide]]
*'''[[RaceCapturePro2_Enable_Predictive_Timing|How to: enable Predictive Timing]]'''
*[[RaceCapturePro2_hardware_guide|Hardware installation and operation guide]]
*'''[[RaceCapturePro2_TelemetryQuickstart|How to: set up telemetry]]'''
*[[RaceCapturePro2_3.5G_module_upgrade|3.5G Module Upgrade guide]]
*'''[[RaceCapturePro2_ShiftLights|How to: sequential shift lights]]'''
*[[RaceCapture_App_User%27s_Guide|RaceCapture App User's guide]]
*[[RaceCapturePro_Sensors|Sensor guide]]
*[[RaceCapturePro_Lua_Scripting|Lua scripting guide]]


*[[RaceCapturePro_FAQ|More FAQs and How-To's"]]
==Accessory / add-on guides ==
*[[SensorX|SensorX sensor breakout board assembly guide]]
*[[CoilX|CoilX Tach interface to ignition coils guide]]
*[[RaceCapturePro2_GoProWiFi|WiFi module for automatic GoPro control guide]]


*'''[[RaceCapture_App_User%27s_Guide|RaceCapture App User's Guide]]
==How To==
*'''[[RaceCapturePro_Downloads|Software and Firmware downloads]]'''
*[[RaceCapturePro2_Enable_Predictive_Timing|How to: enable Predictive Timing]]
*'''[[RaceCapturePro_Sensors|Sensor Guide]]'''
*[[RaceCapturePro2_OBD2|How to: enable OBD2 channels]]
*'''[[RaceCapturePro_Lua_Scripting|Lua Scripting Guide]]'''
*[[RaceCapturePro2_Calibrate_Sensor|How to: calibrate and configure an analog sensor]]
*[[RaceCapturePro2_ShiftLights|How to: sequential shift lights]]
*[[RaceCapturePro2_GPS|How to: get best GPS data]]
*[[RaceTracks|How to: submit a new race track]]
*[[RaceCapturePro_Analysis|How to: analyze your data]]
*[[Podium_Driver_Data_Analysis|How to: Analyze data in Podium to become a faster driver]]
*[[RaceCapturePro_FAQ|More FAQs and How-To's]]
 
==By Car==
*[[RaceCapturePro2_vehicle_guide|Vehicle Guide]]
 
==By Sensor Type==
*[[RaceCapturePro2_RPM|RPM]]'''
 
==Reference==
*[[RaceCapturePro2_logfile_reference|Log file reference]]
 
==More Information==
*[https://github.com/autosportlabs Source code]
*[https://github.com/autosportlabs Source code]
*[[RaceTracks|List of supported Race Tracks and Track Maps]]
*[[RCP_CAN|CAN Integration support]]


===Previous Hardware Versions===
===Previous Hardware Versions===
Line 89: Line 112:
|-
|-
!colspan="2"|'''PWM/Analog outputs'''
!colspan="2"|'''PWM/Analog outputs'''
|-
|Channels
|4
|-
|-
|PWM output type
|PWM output type
Line 116: Line 142:
|CAN baud rate
|CAN baud rate
|125K, 250K, 500K, 1M baud
|125K, 250K, 500K, 1M baud
|-
|CAN Termination
|120 ohms terminated, both channels
|-
|-
|CAN filters
|CAN filters
Line 121: Line 150:
|-
|-
|Protocol support
|Protocol support
|OBDII PID, custom CAN messaging
|OBDII PID (CAN 1), custom CAN messaging
|-
|-
!colspan="2"|'''Telemetry/Wireless'''
!colspan="2"|'''Telemetry/Wireless'''
|-
|-
|Cellular
|Cellular (North America)
|Quad-band GSM (internal module, optional)
|3.5G GSM 850/1900MHz (internal module, optional)
|-
|Cellular (Worldwide)
|2.5G Quad-band GSM (internal module, optional)
|-
|-
|Bluetooth
|Bluetooth
|Bluetooth 2.0 (external module, optional)
|Bluetooth 2.0 (external module, optional)
|-
|-
|Serial
|Aux Serial
|Type External RJ11
|Type External RJ11 / RS232 signaling
|-
|-
|Max Baud Rate
|Max Baud Rate
Line 144: Line 176:
|Gyro
|Gyro
|3 (Yaw/Pitch/Roll) (1000 degrees/sec)
|3 (Yaw/Pitch/Roll) (1000 degrees/sec)
|-
|Magnetic compass
|1 (Bearing) (device capable of 3)
|-
!colspan="2"|GPS
|-
|-
|GPS Type
|GPS Type
Line 162: Line 189:
|-
|-
|Micro SD
|Micro SD
|Up to 32GB (SDHC)
|Up to 32GB (SDHC) FAT32
|-
|-
!colspan="2"|Configuration Capacity
!colspan="2"|Configuration Capacity
Line 178: Line 205:
|-
|-
|Dimensions
|Dimensions
|5.3″ (w) x 4.2″ (h) x 1.2″ (tall) / 135x110x31 mm(est)
|5.3" (width) x 4.2" (height) x 1.2" (tall) / 135x110x31 mm(est)
|-
|Mounting area
|5.5"(140mm) x 4"(102mm)
|-
|Mounting holes
|Dual mounting points on 5" (127mm) centers - 0.125"-0.25" (3-6mm) fastener
|-
|-
|Weight
|Weight
|9oz / 255gm (est)
|9oz / 255gm (est)
|-
|Power connection
|Terminal block: 1A max<br/>RJ45: 1A max
|-
|Power Consumption (max)
|Main System: 0.6W<br/>With Bluetooth: 1.6W<br/>With Cellular Telemetry: 8.6W<br/>With Cellular Telemetry and Bluetooth: 9.6W
|-
|-
|Temperature
|Temperature
| Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module)
| Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module)
|}
|}
[[Image:add_to_cart.png|link=http://www.autosportlabs.com/product/racecapturepro/]]

Revision as of 22:01, 15 December 2017

RaceCapture/Pro Quick Links

  • Add to cart.png

Getting Started

User Guides

Accessory / add-on guides

How To

By Car

By Sensor Type

Reference

More Information

Previous Hardware Versions

RaceCapture/Pro MK1

Quick Reference

Download a printable PDF

RaceCapture-Pro MK2 quick reference sheet.jpg

RaceCapture/Pro MK2 Specifications

Input / Output Channels
Analog Inputs
Channels 8 (battery voltage dedicated on channel 8)
Voltage range 0-5v
Input impedance 1M ohm
Voltage protection 400v (intermittent)
ADC precision 12 bit
Maximum sample rate 1000Hz
Mapping Raw / Linear formula / Interpolated map
Digital I/O
Channels 3
Output mode type Open drain
Output current capacity 1A, inductive clamped
Input mode voltage range 0-12v
Input voltage protection 400v (intermittent)
Maximum sample rate 1000Hz
Timer Inputs (RPM / Frequency)
Channels 3
Input voltage protection 400v (intermittent)
Maximum sample rate 1000Hz
PWM/Analog outputs
Channels 4
PWM output type push/pull
PWM output voltage range 5v
Output current capacity 50mA
Analog Output 0-5v
Voltage Reference
Output Voltage/Capacity 5v / 1A
Connectivity
CAN Bus
CAN Channels 2
CAN baud rate 125K, 250K, 500K, 1M baud
CAN Termination 120 ohms terminated, both channels
CAN filters 14 per channel
Protocol support OBDII PID (CAN 1), custom CAN messaging
Telemetry/Wireless
Cellular (North America) 3.5G GSM 850/1900MHz (internal module, optional)
Cellular (Worldwide) 2.5G Quad-band GSM (internal module, optional)
Bluetooth Bluetooth 2.0 (external module, optional)
Aux Serial Type External RJ11 / RS232 signaling
Max Baud Rate 230400
Inertial Motion Unit
Accelerometer Channels 3 (X/Y/Z) (2G, 4G capable)
Gyro 3 (Yaw/Pitch/Roll) (1000 degrees/sec)
GPS Type External active antenna
GPS Maximum sample rate 50Hz
GPS accuracy 2.5M CEP
Storage
Micro SD Up to 32GB (SDHC) FAT32
Configuration Capacity
Auto-detect track database 240
Sectors per track 20
Channel support 200
Physical
Dimensions 5.3" (width) x 4.2" (height) x 1.2" (tall) / 135x110x31 mm(est)
Mounting area 5.5"(140mm) x 4"(102mm)
Mounting holes Dual mounting points on 5" (127mm) centers - 0.125"-0.25" (3-6mm) fastener
Weight 9oz / 255gm (est)
Power connection Terminal block: 1A max
RJ45: 1A max
Power Consumption (max) Main System: 0.6W
With Bluetooth: 1.6W
With Cellular Telemetry: 8.6W
With Cellular Telemetry and Bluetooth: 9.6W
Temperature Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module)