Difference between revisions of "RaceCapturePro2 QuickStart"

From Autosport Labs
Jump to: navigation, search
(Created page with "== Prerequisites == * Download and install the app (Windows only currently): [http://autosportlabs.net/asl_dist/rc_app/raceCapture_1.0.0.exe RaceCapture App v1.0.0] * Download an...")
 
Line 14: Line 14:
 
## You should see 'Reading Configuration' at the top of the window once the app detects RaceCapture/Pro.
 
## You should see 'Reading Configuration' at the top of the window once the app detects RaceCapture/Pro.
 
# Click on 'Dashboard'
 
# Click on 'Dashboard'
# Click on the bottom right arrow three times, which will display the digital dash. You should see the Utc and Interval channels changing, which means data is being transmitted over USB. <br> [[File:Dash.png|500px]]
+
# Click on the bottom right arrow three times, which will display the digital dash. You should see the Utc and Interval channels changing, which means data is being transmitted over USB.  
 +
'''Protip:''' Pick up the RaceCapture/Pro unit, move it around and observe changes from the internal accelerometers and gyros!
 +
 
 +
[[File:Dash.png|500px]]
 +
 
 
# You have now setup the RaceCapture app!
 
# You have now setup the RaceCapture app!

Revision as of 23:49, 11 December 2014

Prerequisites

  • Download and install the app (Windows only currently): RaceCapture App v1.0.0
  • Download and unzip drivers: Windows XP/Vista/7/8 Drivers V2
    • Note for Windows 8 users - These drivers are unsigned. We are working on creating a signed driver set, but in the meantime you will need to disable the driver signing requirement for Windows 8. Instructions

Quick Start

  1. Attach GPS and Telemetry (if purchased) to RaceCapture/Pro
  2. Plug in the supplied USB cable to RaceCapture/Pro and your computer.
  3. When prompted for drivers, select them from the zip file you unzipped previously.
    1. If not prompted or Windows does not ask you to locate drivers, open Device Manager, find RaceCapture/Pro (usually under 'Other devices'), right click and select 'Update Driver' software. Then select the folder containing the unzipped drivers you downloaded previously.
  4. Confirm you really want to install the drivers
  5. Open the RaceCapture application.
    1. You should see 'Reading Configuration' at the top of the window once the app detects RaceCapture/Pro.
  6. Click on 'Dashboard'
  7. Click on the bottom right arrow three times, which will display the digital dash. You should see the Utc and Interval channels changing, which means data is being transmitted over USB.

Protip: Pick up the RaceCapture/Pro unit, move it around and observe changes from the internal accelerometers and gyros!

Dash.png

  1. You have now setup the RaceCapture app!