Difference between revisions of "RaceCapturePro Downloads"

From Autosport Labs
Jump to: navigation, search
Line 19: Line 19:
Packages coming soon!
Packages coming soon!
===Mobile App===
==Mobile App==
Android: Use the RaceCapture/App in the [https://play.google.com/store/apps/details?id=com.autosportlabs.racecapture&hl=en Play Store]
Android: Use the RaceCapture/App in the [https://play.google.com/store/apps/details?id=com.autosportlabs.racecapture&hl=en Play Store]

Revision as of 20:04, 3 January 2015

RaceCapture App

  • Use the RaceCapture App to configure and visualize data from your RaceCapture/Pro device.
  • For MK1 and MK2 versions of RaceCapture/Pro
    • MK1 users: ensure you have updated to the latest V2 firmware.

Note - Dashboard, configuration and telemetry analysis features via race-capture.com are available now; in-app analysis features will be available in the upcoming release (soon)


RaceCapture App v1.2.2

Previous Versions

Extract this zip package to your computer and direct Windows to the location of the drivers when you are prompted for drivers after RaceCapture/Pro is plugged in.

Mac OS X

Mac installer coming soon!


Packages coming soon!

Mobile App

Android: Use the RaceCapture/App in the Play Store

  • Note : The main RaceCapture app will be supported on Android in an near-term upcoming release. This will provide a unified experience across all platforms.

USB Driver

Note for Windows 8 users - These drivers are unsigned. We are working on creating a signed driver set, but in the meantime you will need to disable the driver signing requirement for Windows 8. Instructions

  • OS X: No driver needed
  • Linux: No driver needed

RaceCapture/Pro MK2


See the CHANGELOG file in the .zip file package to see the list of changes for that release.

Previous Versions

How to update MK2 Firmware

Save your configuration

WARNING: Updating firmware will reset the default config on a major and minor release. Bugfix releases do not reset configuration. Version scheme: MAJOR.MINOR.BUGFIX

If in doubt, be sure to save your configuration using the RaceCapture app.

Connect RaceCapture/Pro MK2 to your computer and connect to it with the app.

  • Press the 'Configuration' button to navigate to the configuration section.
  • On the left menu, select Firmware
  • On the firmware screen, press the button "Update Firmware"
  • Navigate to the firmware file ending in ".ihex"
  • Select this file. The firmware will update and show a percentage progress indicator.
  • If there is a problem detecting RaceCapture/Pro, unplug/replug and restart the app.

Alternative method

  • While holding down the button on RaceCapture/Pro, power it up by plugging in to USB.
  • You should observe a rapidly flashing red LED on the unit: it is in bootloader mode.
  • Start the app. Note, it will not be able to connect - this is expected.
  • Navigate to the configuration/firmware update screen, select the firmware file and update the firmware.

Problems? visit http://autosportlabs.org and post your question - we will help you promptly.

RaceCapture/Pro MK1

Version 2 Beta firmware and app

Advanced users are encouraged to try the V2 beta software. Download the firmware and new app below. Official support for V2 firmware and app coming soon for MK1 users!


The 2.7.6 firmware for MK1 is considered 'stable beta' - We feel it's much better quality than the previous 1.2.x firmware and RaceAnalyzer combination, but since it is the first V2 firmware and app release for MK1, we are officially calling it Beta. Please visit the Discussion / support forum for help.

Previous Versions

MK1 Bootloader Releases

The bootloader is permanently, factory installed and shouldn't normally need to be re-flashed - contact us for support if you have any questions.

Firmware update utility

This is a small command-line utility that writes new firmware to RaceCapture/Pro. Note, it is already included in the .zip distributions of RaceCapture/Pro firmware.