The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
3/8" NPT threaded brass body and a 2 pin terminal.
<link to Race Capture analog channel configuration>
Can be used for air inlet temperature for normally aspirated engines
GM
Wells SU107 : Standard Motors Products (SMP) AX1
Pigtail Pico 5616pt
3/8" NPT threaded brass body and a 2 pin terminal.
<link to Race Capture analog channel configuration>
Use for measuring air inlet temperature. Exposed sensing element, necessary for boosted engines where fast response times are necessary. Due to the fragility of the sensing bulb, it is necessary to pot the base of the sensor leads with sensor-safe silicone when used in high vibration environments.
Oil Temperature
Ambient Air Temperature
Pulse Sensors
RPM
Wheel Speed
Pressure Sensors
Fluid Pressure
Boost / Vacuum
Mfg
Description
Pic
Pigtail
Part Numbers
Mechanical
Analog Configuration
Notes
GM
3.3 bar MAP sensor
Sensor: 9373269
Pigtail: 88987997
fastens with clips
<link to Race Capture analog channel configuration>
3.3 bar map sensor found on turbo GM products
DIY
Freescale MPX4250AP 2.5 bar MAP sensor
N/A
custom
custom
<link>
An extremely popular MAP sensor used in the Megajolt ignition and Megasquirt fuel injection systems. Can build up a simple circuit on perfboard and be powered by 5V v-ref from Race Capture
Distance Sensors
Suspension Travel
Mfg
Description
Pic
Pigtail
Part Numbers
Mechanical
Analog Configuration
Notes
DIY
Sharp GP2D12 optical distance sensor
3-pin connector
GP2D12
custom
<link>
Optical distance sensor measures from 10 to 80 cm and outputs a voltage corresponding to that distance. To measure suspension travel, install a unit at each corner of car, targeting the road surface. May also be used for pedal travel as well, providing there is a target to sense