Jump to: navigation, search

RaceCapturePro installation guide

Revision as of 03:44, 28 September 2012 by Brentp (Talk | contribs) (RaceCapture installation guide work in progress)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Overview

Terminal Block Connections

Connections Faceing Terminal Block, from left to right

  • Ground/Common
  • +12v
  • Analog/Frequency out 4
  • Analog/Frequency out 3
  • Analog/Frequency out 2
  • Analog/Frequency out 1
  • +5V Voltage reference
  • Analog input 7
  • Analog input 6
  • Analog input 5
  • Analog input 4
  • Analog input 3
  • Analog input 2
  • Analog input 1
  • General purpose input/output 3
  • General purpose input/output 2
  • General purpose input/output 1
  • Frequency/pulse input 3
  • Frequency/pulse input 2
  • Frequency/pulse input 1

Expansion Port

SD Card Slot

USB Port

LED Indicators

  • Power LED

Indicates the unit is powered up (via 12v supply or USB)

  • LED1

Indicates GPS Activity. Slow flash (1Hz) indicates GPS is actively acquiring. Fast flash (5Hz for 5Hz GPS; 10Hz for 10Hz GPS) indicates GPS is locked on to satellites.

  • LED2

Indicates

Pushbutton

Communication Ports

  • Port 1

Used for telemetry expansion module

  • Port 2

used for GPS module