RaceCapture on Raspberry Pi
- 1 Introduction
- 2 Hardware Selection
- 3 Installation
- 3.1 Installing Rasbian OS
- 3.2 Installing dependencies
- 3.3 Installing the RaceCapture app package
- 3.4 Automatic start upon power up
- 4 Connecting to your RaceCapture system
- 5 Extra Features
- 6 Additional Tips
We designed the RaceCapture app to run nearly anywhere - even a Raspberry Pi. And now, for about $100 you can create a hardwired, dedicated dash for your RaceCapture system.
You get all of the benefits of a dedicated dash:
- Automatically runs upon power up - you can configure the dash to automatically launch the RaceCapture App - just as you'd expect it to work.
- Hard-wired data connection to RaceCapture - no wireless connections to configure, with the reliability of a direct wire.
- Runs on the bare metal - The RaceCapture app runs without Android or iOS; there's no other apps competing for resources, or compromising system stability.
- Overheating resistance - Your typical mobile device requires extra care in very hot weather to prevent damage to it's internal battery, and will shut down if overheated. With proper heat-sinking, the Raspberry Pi should handle the heat.
The RaceCapture app running on the Raspberry Pi is compatible with any hardware version of RaceCapture or PodiumConnect.
While the results are pretty great, these instructions are currently for those adventurous race car hackers who know their away around a command line, comfortable working with hardware and want to dig in. Think it's cool, but too much to tackle? Rope in your nearest computer/electronics geek - you need one on your race team, anyway. :) Or, just use the plug and play option and use an Android or iOS device via Bluetooth or WiFi.
Current status and future plans
Even though this is brand new and officially experimental in nature, we still made it as easy as reasonably possible: we wrapped up the RaceCapture App into as close to a self-running installer, that can run on a bone stock Raspberry Pi image - only a few changes are required to the default image, detailed below.
However, in the near future we will create a dedicated Raspberry Pi image that you can burn to an SD card and simply boot up, and move towards more official support as we iron out the issues.
Reporting issues and getting support
Chances are you'll encounter an issue you'll want to report. Before you do that, check the issue log to see if it's already known.
Otherwise - the best place for support, feedback and sharing success stories is on the forums . Drop us a note there so we can see the progress of your project!
RaceCapture currently requires the Raspberry Pi 3: Raspberry Pi 3.
It is not yet compatible with the Pi 4, due to extensive changes in the graphics subsystem. Expect to see Pi 4 support in the 2.0 version of the app.
The RaceCapture app package is designed to recognize the following screens:
- Official Raspberry Pi display with capacitive touch screen;
- Displays supporting the AR1100 resistive touch screen controller.
Other displays can work as well, and additional work may be needed to support the screen's touch controller. If unsure, just pick the Official Raspberry Pi display
A recommended enclosure is the Smart Pi Touch Case
You can 3D print a sun shade for this enclosure File:P001 Raspberry Pi Display Sun Shade.stl.zip (Courtesy of Michael Lee)
Installed on Dashboard
The Raspberry Pi dashboard requires its own power supply. You'll need a high quality 5v power supply with 2 amps minimum capacity; 3 amps is highly recommended, and ideally one with a low drop out voltage, so power is not cut to the Raspberry Pi when you're loading the main battery, such as when cranking the engine.
Suggested Power Supplies
After you have power to the Raspberry Pi dashboard, you may notice your RaceCapture device will be powered by the USB cable connected to the Pi, just as if you're powering RaceCapture from your laptop. You will still want to power your RaceCapture via 12v; see the respective installation guides for information on how to power your device.
If you're running in hot weather, we recommend the standard Raspberry Pi heatsink kit to keep your system cool.
Installing Rasbian OS
We recommend installing Raspian Jessie Lite - download from the official site and follow the instructions for burning to an SD card.
Once you've created your image, boot up your Raspberry Pi and log in with the default username of 'pi' and password 'raspberry'.
Change the default password
For maximum security, change the password for the default user 'pi'
and specify a new, secure password.
Configure Raspberry Pi base settings
If you want network capability in addition to the ethernet connection, enable and configure WiFi per the official documentation
(Optional) Enable SSH
You can optionally enable SSH for remote management from the comfort of your main computer's keyboard and screen.
Install multi-touch tools
Install the packages that enable multi-touch interfaces. Enter the following at the command line:
> sudo apt-get install mtdev-tools
Configure memory split
You'll need to bump up the memory made available to the GPU. Increase the default value of 64 to 256.
- Via raspi-config tool
You can adjust the memory split by running the raspi-config tool. See the official documentation
- Editing /boot/config.txt
You can adjust the value directly by editing the /boot/config.txt file.
> sudo nano /boot/config.txt
Find the line containing gpu_mem=64 and change the number to 256
Save the file by pressing ctrl-x then press Y to confirm.
Installing the RaceCapture app package
Download the latest RaceCapture app package for Raspberry Pi and place it in the /opt/ directory of the Raspberry Pi.
- Directly downloading to the Raspberry Pi
You can download it directly by getting the URL of the package by right-clicking the download link and copying the URL to your clipboard. Then, use it in the command below:
cd /opt sudo wget <package URL>
Extract the package
Now extract the downloaded package :
sudo tar -xjvf <downloaded file>
Launch the app
Launch the RaceCapture app by running the following command:
Launching with Watchdog
You can enable an automatic watchdog that re-launches the app in case a crash occurs.
/opt/racecapture/run_racecapture.sh -w 1
- Note: You can break out of the application by issuing Alt + PrntScn + k to the application.
You can further stop all racecapture processes by issuing the following command (e.g. via ssh)
killall -9 run_racecapture.sh
Automatic start upon power up
To get the full dedicated dashboard experience, you can enable automatic launch of the RaceCapture app upon power up.
To do this, edit the system's startup file:
sudo nano /etc/rc.local
and add the following line before the exit 0 line.
/opt/racecapture/boot_racecapture.sh pi exit 0
Save the file by pressing ctrl-x then press Y to confirm.
Connecting to your RaceCapture system
- Connect the power to your display and power up.
- Connect your RaceCapture/Pro or RaceCapture/Track to the Raspberry Pi using the USB cable.
- Launch the RaceCapture app by running:
If you have it set to launch automatically, simply let it start upon power-up.
Connection and usage
Once the RaceCapture App is running, it will connect automatically over USB. You can use the app just as you would on Android or iOS.
The RaceCapture app responds to keyboard commands for certain behaviors. You can use a USB keyboard - or a device that emulates keyboard commands - to control the RaceCapture App.
Currently there are keyboard commands for the following:
- Navigating dashboard screens - Use the left and right arrow keys to switch between screens
- Escaping from screens / menus - The Escape key can be used to exit out of screens and options, just like the 'back' button on Android.
- Acknowledging alerts - Use the following keys to acknowledge alerts, including responding to pit-to-car alerts:
- K : to indicate 'Yes' or 'OK'
- N : to indicate 'No"
See this link for additional tips on how to setup the Pi and speed up the boot times. This should be especially helpful for beginners.