Jump to: navigation, search

Difference between revisions of "V3.2.x / 2.8.x Downloading the MJLJ firmware"

(New page: ==Identifying your MJLJ version== The version of firmware you install depends on the board version you have. <b>It is critical you install the correct firmware for your board! '''If the i...)
 
m (bump version numbers)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Identifying your MJLJ version==
 
==Identifying your MJLJ version==
  
The version of firmware you install depends on the board version you have. <b>It is critical you install the correct firmware for your board! '''If the incorrect firmware is installed, the MJLJ will not synchronize correctly with the EDIS module.'''
+
The version of firmware you install depends on the board version you have. It is critical you install the correct firmware for your board!  
  
 +
'''If the incorrect firmware is installed, the MJLJ will not synchronize correctly with the EDIS module and ignition timing errors will occur.'''
  
Even though the V3 board has been available for quite some time, many of you are running MJLJ V2.x hardware. Fortunately they are easy to identify.
 
  
If you don't recall the version of the board you installed, you can quickly remove the top four cover screws for a quick board inspection.
+
If you don't recall the version of the MJLJ hardware you have, you can quickly remove the top four cover screws for a quick board inspection.
  
 
==MJLJ V2.x hardware==
 
==MJLJ V2.x hardware==
 
[[Image:mjlj_board_and_proc.jpg]]
 
[[Image:mjlj_board_and_proc.jpg]]
  
Download the MJLJ 2.7.x firmware image from the [[V2.x downloads|V2.x download area]]
+
Download the MJLJ 2.8.x firmware image from the [[MJLJ_V2_Downloads|V2.x download area]]
  
  
Line 17: Line 17:
 
[[Image:mjlj_3.0.0_board_and_proc.jpg]]
 
[[Image:mjlj_3.0.0_board_and_proc.jpg]]
  
Download the MJLJ 3.1.x firmware image from the [[V3.x downloads]V3.x download area]]
+
Download the MJLJ 3.2.x firmware image from the [[MJLJ_V3_Downloads|V3.x download area]]

Latest revision as of 01:02, 22 April 2007

Identifying your MJLJ version

The version of firmware you install depends on the board version you have. It is critical you install the correct firmware for your board!

If the incorrect firmware is installed, the MJLJ will not synchronize correctly with the EDIS module and ignition timing errors will occur.


If you don't recall the version of the MJLJ hardware you have, you can quickly remove the top four cover screws for a quick board inspection.

MJLJ V2.x hardware

Mjlj board and proc.jpg

Download the MJLJ 2.8.x firmware image from the V2.x download area


MJLJ V3.x hardware

Mjlj 3.0.0 board and proc.jpg

Download the MJLJ 3.2.x firmware image from the V3.x download area