Megajolt

The Megajolt2 Family

The Megajolt family represents the line of programmable, crank fired ignition control systems.

Megajolt/2 is a high performance programmable crank-fired ignition system optimized for 4 cylinder applications

Capabilities

Features

32 bit Infineon XMC4000 - 120MHz
Single VR Sensor input
2 on-board coil drivers
Soft and hard rev limit
Designed to work with commodity OEM sensors and coil packs
Initial support for 36-1 trigger wheel; other trigger wheel configurations to follow
up to 16x16 ignition map with linear interpolation
- Dual, on the fly switchable ignition map support
2 User defined digital outputs
3 analog input channels
- Throttle Position, Temperature and Aux
- Ignition advance correction for Temperature and Aux
On-Board MAP sensor
USB or Bluetooth programming interface

Summary
Megajolt/C is a Programmable Crank Fired ignition targeted for intelligent coil-on-plug modules or external igniter applications.

Capabilities

Supported configurations
- Up to 8 cylinders in true coil-on-plug mode
- Up to 12 cylinders in wasted spark mode
15K+ RPM capable
0.1 degree timing resolution

Features

32 bit Infineon XMC4000 - 120MHz
Dual VR Sensor input
- Crank Sensor + Cam Angle Sensor input
8 logic-level coil driver outputs
- Designed to drive coil-on-plug or coil-near-plug modules such as the GM LS-1, LS-2, BMW or similar coil modules with built-in coil drivers
Soft and hard rev limit
Designed to work with commodity OEM sensors and coil packs
Initial support for 36-1 trigger wheel; other trigger wheel configurations to follow
up to 16x16 ignition map with linear interpolation
- Dual, on the fly switchable ignition map support
2 User defined digital outputs
3 analog input channels
- TPS, Temperature and Aux
- Ignition correction for Temperature and Aux
On-Board MAP sensor
USB or Bluetooth programming interface

Summary
Ultra compact EDIS ignition control

Capabilities

Features