File:Hard rev lim board 1.2.0 solder applied.jpg: Difference between revisions

Latest revision as of 07:05, 17 April 2008

hard rev limit, solder blobs applied

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	07:05, 17 April 2008		800 × 600 (88 KB)	Brentp (talk \| contribs)	hard rev limit, solder blobs applied

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon PowerShot SD300
Exposure time	1/60 sec (0.016666666666667)
F Number	f/5.6
Date and time of data generation	21:08, 16 April 2008
Lens focal length	5.8 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
File change date and time	23:56, 16 April 2008
Y and C positioning	Centered
Exif version	2.2
Date and time of digitizing	21:08, 16 April 2008
Image compression mode	3
APEX shutter speed	5.90625
APEX aperture	4.96875
Maximum land aperture	2.96875 APEX (f/2.8)
Metering mode	Center weighted average
Flash	Flash fired, auto mode
Color space	sRGB
Focal plane X resolution	10,142.857142857
Focal plane Y resolution	10,142.857142857
Focal plane resolution unit	inches
Sensing method	One-chip color area sensor
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Manual white balance
Digital zoom ratio	1
Scene capture type	Standard

Revision as of 07:05, 17 April 2008 (view source) Brentp (talk \| contribs) (hard rev limit, solder blobs applied)	Latest revision as of 07:05, 17 April 2008 (view source) Brentp (talk \| contribs) m (Protected "Image:Hard rev lim board 1.2.0 solder applied.jpg" [edit=sysop:move=sysop])
(No difference)