IgnitionDrivers: Difference between revisions
Funky Diver (talk | contribs) m (→Features) |
m (changed IGBT to on Semi) |
||
| Line 3: | Line 3: | ||
==Jolt4 Ignition Driver== | ==Jolt4 Ignition Driver== | ||
The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the [http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=0271130115BOSCH9385691 Bosch BIP373] , [http://www. | The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the [http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=0271130115BOSCH9385691 Bosch BIP373] , [http://www.onsemi.com/PowerSolutions/product.do?id=NGB8202N On Semi NGB8202NT4G] and so on. | ||
[[image:jolt4_brd.png]] | [[image:jolt4_brd.png]] | ||
Latest revision as of 22:04, 11 October 2011
Ignition Driver boards
Jolt4 Ignition Driver
The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the Bosch BIP373 , On Semi NGB8202NT4G and so on.
Features
- Up to 4 ignition drivers supported
- 10 pin molex connector for ease of use
- LEDs indicating driver activity (requires additional drive current of 3-6ma)
- Heat-sinking from bottom of PC board- transistors are soldered down
- 2.48 x 3.14" board sized to fit our compact aluminum enclosure (or other enclosure accepting 2.5" width PC Boards)
- Metric sizing for board is 63mm x 80mm
Connector Pinout
License
This design is released under the Autosport Labs Creative Commons license
