TachAdapter: Difference between revisions
(Created page with "==Tachometer Adapter== This small board adapts a Tachometer to up to 4 individual coil packs, making it capable of handling 4, 6 or 8 cylinder wasted spark applications. [[Imag...") |
|||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Tachometer Adapter== | ==Tachometer Adapter== | ||
This small board adapts a Tachometer to up to 4 individual coil packs, | This small board adapts a Tachometer to up to 4 individual coil packs, capable of handling 4, 6 or 8 cylinder wasted spark applications. | ||
Available for purchase in our [http://www.autosportlabs.com/tach-adapter-p-65.html Online Store] | |||
[[Image:tachAdapter_small.jpg]] | [[Image:tachAdapter_small.jpg]] | ||
| Line 7: | Line 9: | ||
===Installation=== | ===Installation=== | ||
Installation | Installation: | ||
* Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary. | |||
- Connect the tach output to the input of your tachometer. | ** We recommend 24 gauge wire, but wire gauge is not critical- so long as it fits the module. | ||
* Connect the tach output to the input of your tachometer. | |||
* Seal the module with shrink tubing or electrical tape- the board is small enough to integrate into your wire harness / bundle. | |||
===Example Wiring=== | ===Example Wiring=== | ||
[[Image:tachAdapter_wired_small.jpg]] | [[Image:tachAdapter_wired_small.jpg]] | ||
Example wiring for a 4 cylinder wasted spark application: | Example wiring for a 4 cylinder wasted spark application: yellow wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs. | ||
===Schematics=== | |||
[[Image:tach_adapter_sch.png|left|thumb|500px]] | |||
Latest revision as of 17:38, 13 March 2015
Tachometer Adapter
This small board adapts a Tachometer to up to 4 individual coil packs, capable of handling 4, 6 or 8 cylinder wasted spark applications.
Available for purchase in our Online Store
Installation
Installation:
- Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.
- We recommend 24 gauge wire, but wire gauge is not critical- so long as it fits the module.
- Connect the tach output to the input of your tachometer.
- Seal the module with shrink tubing or electrical tape- the board is small enough to integrate into your wire harness / bundle.
Example Wiring
Example wiring for a 4 cylinder wasted spark application: yellow wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs.
