Revision as of 01:41, 2 February 2011

Ignition Driver boards

The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the Bosch BIP373 , Fairchild ISL9V3040S3ST and so on.

Up to 4 ignition drivers supported
10 pin molex connector for ease of use
LEDs indicating driver activity (requires additional drive current of 3-6ma)
Heat-sinking from bottom of PC board- transistors are soldered down to PC Board.
2.48 x 3.14" board sized to fit our compact aluminum enclosure (or other enclosure accepting 2.5" width PC Boards)

Revision as of 23:35, 1 February 2011 (view source) Brentp (talk \| contribs) (→‎Features) ← Older edit		Revision as of 01:41, 2 February 2011 (view source) Brentp (talk \| contribs) (→‎Downloads: updated filename) Newer edit →
Line 24:		Line 24:

	==Downloads==		==Downloads==
	[http://www.autosportlabs.net/asl_dist/jolt4/~~jolt4~~.zip Revision A Hardware]		[http://www.autosportlabs.net/asl_dist/jolt4/jolt4_revA.zip Revision A Hardware]