3.2.x/2.8.x firmware upgrade guide: Difference between revisions
(New page: *V3.1.0 / V2.7.0 feature summary *Backing up your current configuration *[[V3.1b Downloading the MJLJ firmware|Dow...) |
No edit summary |
||
| Line 1: | Line 1: | ||
*[[V3. | *[[V3.1.x / 2.7.x Feature summary|V3.1.0 / V2.7.0 feature summary]] | ||
*[[V3. | *[[V3.1.x / 2.7.x Backing up your current configuration|Backing up your current configuration]] | ||
*[[V3. | *[[V3.1.x / 2.7.x Downloading the MJLJ firmware|Downloading the MJLJ firmware]] | ||
*[[V3. | *[[V3.1.x / 2.7.x Installing the new firmware image|Installing the new firmware image]] | ||
*[[V3. | *[[V3.1.x / 2.7.x Installing the configuration software|Installing the configuration software]] | ||
*[[V3. | *[[V3.1.x / 2.7.x New Feature: Calibrate TPS / Load Axis Calibration|New Feature: Calibrate TPS / Load Axis Calibration]] | ||
*[[V3. | *[[V3.1.x / 2.7.x New Feature: Dual on-the-fly switchable Ignition Configuration|New Feature: Dual on-the-fly switchable Ignition Configuration]]] | ||
*[[V3. | *[[V3.1.x / 2.7.x Optional hardware modifications|Optional hardware modifications]] | ||
Revision as of 01:01, 4 February 2007
- V3.1.0 / V2.7.0 feature summary
- Backing up your current configuration
- Downloading the MJLJ firmware
- Installing the new firmware image
- Installing the configuration software
- New Feature: Calibrate TPS / Load Axis Calibration
- New Feature: Dual on-the-fly switchable Ignition Configuration]
- Optional hardware modifications
