Revision as of 21:46, 8 January 2015

Introduction

@@ Line 10: / Line 10: @@
 ==Controlling a CAN enabled Device==
-'''AIM Mychron 3 Dash'''
-The following information is a sum up of reverse engineering findings documented here: [http://sites.google.com/site/mychron3/home/can-bus-protocol]. Example of LUA implementation of the the different packets documented on the Mychron 3 Hack page are provided below:
-[[Packet 401h: RPM, Speed, Gear blink control, Gear]]
-TODO
-[[Packet 402h: Temperature/Pressure fields (bottom left of display)]]
-TODO
-[[Packet 404h: Control for fields displayed on bottom left of display]]
-TODO
-[[Packet 405h: Shift LEDs, Alarm LEDs]]
-TODO
-[[Packet 406h: RPM range for the digital RPM readout]]
-TODO
-[[Packet 408h: Timing]]
-TODO