AIM CAN: Difference between revisions
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
The following information is a sum up of reverse engineering findings documented here: [http://sites.google.com/site/mychron3/home/can-bus-protocol]. Example of LUA implementation of the the different packets documented on the Mychron 3 Hack page are provided below: | The following information is a sum up of reverse engineering findings documented here: [http://sites.google.com/site/mychron3/home/can-bus-protocol]. Example of LUA implementation of the the different packets documented on the Mychron 3 Hack page are provided below: | ||
Packet 401h: RPM, Speed, Gear blink control, Gear | |||
== Packet 401h: RPM, Speed, Gear blink control, Gear == | |||
TODO | TODO | ||
Packet 402h: Temperature/Pressure fields (bottom left of display) | |||
== Packet 402h: Temperature/Pressure fields (bottom left of display) == | |||
TODO | TODO | ||
Packet 404h: Control for fields displayed on bottom left of display | |||
== Packet 404h: Control for fields displayed on bottom left of display == | |||
TODO | TODO | ||
Packet 405h: Shift LEDs, Alarm LEDs | |||
== Packet 405h: Shift LEDs, Alarm LEDs == | |||
TODO | TODO | ||
Packet 406h: RPM range for the digital RPM readout | |||
== Packet 406h: RPM range for the digital RPM readout == | |||
TODO | TODO | ||
Packet 408h: Timing | |||
== Packet 408h: Timing == | |||
TODO | TODO | ||
Revision as of 21:51, 8 January 2015
AIM Mychron 3 Dash
The following information is a sum up of reverse engineering findings documented here: [1]. Example of LUA implementation of the the different packets documented on the Mychron 3 Hack page are provided below:
Packet 401h: RPM, Speed, Gear blink control, Gear
TODO
Packet 402h: Temperature/Pressure fields (bottom left of display)
TODO
Packet 404h: Control for fields displayed on bottom left of display
TODO
Packet 405h: Shift LEDs, Alarm LEDs
TODO
Packet 406h: RPM range for the digital RPM readout
TODO
Packet 408h: Timing
TODO
