AIM CAN - Autosport Labs

Revision as of 21:54, 8 January 2015 by Jstoezel (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This section documents how to control an AIM Mychron3 Dash display, using an RCP unit via LUA scripting. The following information is a sum up of reverse engineering findings documented here: [1]. Examples of LUA implementation of the the different packets documented on the Mychron 3 Hack page are provided below.

Packet 401h: RPM, Speed, Gear blink control, Gear

TODO

Packet 402h: Temperature/Pressure fields (bottom left of display)

TODO

Packet 404h: Control for fields displayed on bottom left of display

TODO

Packet 405h: Shift LEDs, Alarm LEDs

TODO

Packet 406h: RPM range for the digital RPM readout

TODO

Packet 408h: Timing

TODO

Retrieved from "https://wiki.autosportlabs.com/index.php?title=AIM_CAN&oldid=5980"

This page was last edited on 8 January 2015, at 21:54.