RaceCapture-Pro MK4S Sensors

Temperature Sensors

GM-Style

[ASL_LINEAR_TEMP_M8 : -40 to 150C Linear temperature sensor ]

The specification of the sensor are as follows.

• Mfg / Prt : ASL_LINEAR_TEMP_M8
• Thread Size : 1/8″ NPT
• Cable length : 1 Meter
• Pigtail / Harness connector : M8
• Analog Channel Configuration : Preset available in the RaceCapture app
• Pull up resistor : Not required
• Voltage supply : 3-5V
• Pinout : Pin 1 : Ground || Pin 2 : 5V || Pin 3 : Signal Output
• Body Material : Stainless Steel
• Uses : The sensor is suitable for fluids such as oil, coolant and water

[ Wells SU109 || SMP TX3 : Engine Coolant Temperature Sensor ]

The specification of the sensor are as follows.

• Mfg / Prt : Wells SU109 || SMP TX3
• Thread Size : 3/8" NPT
• Cable length : N/A
• Pigtail : Pico 5615pt ( 2 pin terminal )
• Analog Channel Configuration : Preset available in the RaceCapture app
• Pull up resistor : 2.2K pullup resistor
• Body Material : Copper
• Uses : Used for air inlet temperature for normally aspirated engine

Delphi-Style

[ Delphi 12160855 || AEM-30-2012 : Extended temperature range sensor ]

• Mfg / Prt : Delphi 12160855 equivalent || AEM-30-2012 Equivalent
• Thread Size : 1/8" - 27 NPTF
• Matting Connector : 12047662 connector
• Analog Channel Configuration : Preset available in the RaceCapture app
• Pull up resistor : 2.2K pullup resisto
• Voltage supply : 5V
• Body Material : Brass (PA66)
• Uses : Extended temperature range suitable for coolant and oil