AIM CAN

Revision as of 21:54, 8 January 2015 by Jstoezel (talk | contribs)

This section documents how to control an AIM Mychron3 Dash display, using an RCP unit via LUA scripting. The following information is a sum up of reverse engineering findings documented here: [1]. Examples of LUA implementation of the the different packets documented on the Mychron 3 Hack page are provided below.


Packet 401h: RPM, Speed, Gear blink control, Gear

TODO


Packet 402h: Temperature/Pressure fields (bottom left of display)

TODO


Packet 404h: Control for fields displayed on bottom left of display

TODO


Packet 405h: Shift LEDs, Alarm LEDs

TODO


Packet 406h: RPM range for the digital RPM readout

TODO


Packet 408h: Timing

TODO

Retrieved from "https://wiki.autosportlabs.com/index.php?title=AIM_CAN&oldid=5980"