AIM CAN
Revision as of 22:09, 8 January 2015 by Jstoezel (talk | contribs) (→Packet 401h: RPM, Speed, Gear blink control, Gear)
This section documents how to control an AIM Mychron3 Dash display, using an RCP unit via LUA scripting. The following information is a sum up of reverse engineering findings documented here: [1]. Examples of LUA implementation of the the different packets documented on the Mychron 3 Hack page are provided below.
Packet 401h: RPM, Speed, Gear blink control, Gear
function onTick()
rpm = getChannel(rpmId)
speedmph = getChannel(speedMphId)
gear = getChannel(gearId)
msg = {rpm % 256, rpm / 256, (speedmph % 16) % 256, (speedmph / 16) / 256, 0, 0, gear, 0}
txCAN(0, 1025, 0, msg)
end
Packet 402h: Temperature/Pressure fields (bottom left of display)
TODO
Packet 404h: Control for fields displayed on bottom left of display
TODO
Packet 405h: Shift LEDs, Alarm LEDs
TODO
Packet 406h: RPM range for the digital RPM readout
TODO
Packet 408h: Timing
TODO
