AIM SmartyCam CAN: Difference between revisions

No edit summary
No edit summary
 
(29 intermediate revisions by 2 users not shown)
Line 1: Line 1:
=Introduction=
=Introduction=
'''Note:  This is the old way using Lua Script.  Please see the new way to [[AIM_Integration_CAN_Mapping|integrate with your AIM Data Logging system using CAN mapping]].'''
This CAN bus integration maps CAN bus data from AIM systems using the CAN protocol used for the SmartyCam camera system.
This CAN bus integration maps CAN bus data from AIM systems using the CAN protocol used for the SmartyCam camera system.


Line 6: Line 8:


{| class="wikitable"
{| class="wikitable"
!colspan="7"|BMW E46 (including M3)
!colspan="7"|AIM cable connection mapping
|-
|-
!Connection
!Connection
!AIM Pin
!AIM Pin (Binder 702)
!RaceCapture/Pro Pin
!RaceCapture/Pro Pin (EIA-T568B Ethernet cable)
|-
|-
|CAN High
|CAN High
|1
|1 (White)
|2
|2 (Orange)
|-
|-
|CAN Low
|CAN Low
|4
|4 (Blue)
|3
|3 (Green / White)
|-
|-
|Ground
|Ground
|2
|2 (Brown)
|1
|1 (Orange / White)
|-
|-
|VBExt
|3
|N/C (Do not connect)
|}
|}
====Note====
* RaceCapture/Pro provides a 12v input pin (Pin 8) on the RJ45 connector, which has a common connection to the 12v input of the RaceCapture/Pro terminal block.
* This pin is rated at 1A max. We do not recommend using this pin to supply power to the AIM Smarty CAM.


=Available Channels=
=Available Channels=
This integration enables the following channels
This integration enables the following channels.
 
This assumes the AIM channels 1-5 are defined with the following configuration. You can customize this mapping based on your particular AIM configuration.


{| class="wikitable"
{| class="wikitable"
Line 59: Line 70:
|EGT
|EGT
|-
|-
|Brake Pos
|Brake Pos (channel 1)
|BrakePos
|BrakePos
|-
|-
|Clutch Pos
|Clutch Pos (channel 2)
|Clutch
|Clutch
|-
|-
|Brake Press
|Brake Press (channel 3)
|Brake
|Brake
|-
|-
|Steer Position
|Steer Position (channel 4)
|Steering
|Steering
|-
|-
|Lambda
|Lambda (channel 5)
|Lambda
|Lambda
|-
|-
Line 85: Line 96:


==Get a pre-made cable==
==Get a pre-made cable==
We have AIM integration cables available in our online store:
We have [https://www.autosportlabs.com/product/aim-dashboard-telemetry-cable/ AIM integration cables available in our online store]:


[[Image:AIM_RCP_integration_cable.jpg|500px]]  
[[Image:AIM_RCP_integration_cable.jpg|500px]]  


[[Image:add_to_cart.png|link=http://www.autosportlabs.com/product/]]
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/aim-dashboard-telemetry-cable/]]
 
 
 
 
=Integration Script=
 
<pre>
--AIM Smarty Cam Stream For Race Capture
 
--how frequently we poll for CAN messages
tickRate = 30
--the CAN baud rate
CAN_baud = 1000000
--CAN channel to listen on. 0=first CAN channel, 1=second
CAN_chan = 0
--1 for Big Endian (MSB) mode; 0 for Little Endian mode (LSB)
be_mode = 0
 
--add your virtual channels here
tpsId = addChannel("TPS", 10, 0, 0, 100, "%")
tempId = addChannel("EngineTemp", 1, 0, 0, 120, 'C')
oilTempId = addChannel("OilTemp", 1, 0, 0, 170, 'C')
rpmId = addChannel("RPM", 10, 0, 0, 10000, 'RPM')
oilPresId = addChannel("OilPress", 10, 2, 0, 10, 'Bar')
fuellevelId = addChannel("FuelLevel", 1, 0, 0, 120, "L")
temp1Id = addChannel ("HeadTemp" , 1, 0, 0, 170, 'C')
 
temp2Id = addChannel ("EGT" , 10, 0, 0, 1000, 'C')
ch1Id = addChannel ("BrakePos", 10, 0, 0, 100, "%")
ch2Id = addChannel ("ClutchPos", 10, 0, 0, 100, "%")
ch3Id = addChannel ("Brake", 1, 0, 0, 150, "Bar")
ch4Id = addChannel ("Steering", 1, 0, -300, 300, "Deg")
ch5Id = addChannel ("Lambda", 10, 2, -1, 1, "C")
fuelPresId = addChannel ("FuelPress", 10, 2, 0, 10, "Bar")
 
gearId = addChannel ("Gear", 10, 0, 0, 7, "#")


--customize here for CAN channel mapping
=AIM Integration configuration=
--format is: [CAN Id] = function(data) map_chan(<channel id>, data, <CAN offset>, <CAN length>, <multiplier>, <adder>)
CAN_map = {
[1056] = function(data) map_chan(rpmId, data, 0, 2, 1, 0) map_chan(gearId, data, 4, 2, 1, 0) map_chan_le(tempId, data, 6, 2, 0.1, 0) end,
[1057] = function(data) map_chan(temp1Id, data, 0, 2, 0.1, 0) map_chan(temp2Id, data, 2, 2, 0.1, 0) map_chan(oilTempId, data, 4, 2, 0.1, 0) map_chan_le(oilPresId, data, 6, 2, 0.01, 0) end,
[1058] = function(data) map_chan(ch3Id, data, 0, 2, 0.01, 0) map_chan(tpsId, data, 2, 2, 1, 0) map_chan(ch1Id, data, 4, 2, 1, 0) map_chan(ch2Id, data, 6, 2, 1, 0) end
,
[1059] = function(data) map_chan(ch4Id, data, 0, 2, 1, 0) map_chan(ch5Id, data, 2, 2, 0.01, 0) end,
[1060] = function(data) map_chan(fuellevelId, data, 0, 2, 1, 0) map_chan(fuelPresId, data, 2, 2, 0.1, 0) end
}


function onTick()
==Direct CAN channel Mapping==
    processCAN(CAN_chan)
end


--===========do not edit below===========
[[file:RaceCapture_AIM_channel_mapping.png|640px]]
function processCAN(chan)
    repeat
        local id, e, data = rxCAN(chan)
        if id ~= nil then
            local map = CAN_map[id]
            if map ~= nil then
                map(data)       
            end
        end
    until id == nil
end


--Map CAN channel, little endian format
[https://wiki.autosportlabs.com/images/1/1a/AIM_smartycam_mapping_v3.rcp.zip Download this starter configuration] to instantly import 16 pre-configured channels mapped to your AIM Smarty Cam data. 
function map_chan_le(cid, data, offset, len, mult, add)
    offset = offset + 1
    local value = 0
    local shift = 1
    while len > 0 do
        value = value + (data[offset] * shift)
        shift = shift * 256
        offset = offset + 1
        len = len - 1
    end
    setChannel(cid, (value * mult) + add)
end


--Map CAN channel, big endian format
Instructions:
function map_chan_be(cid, data, offset, len, mult, add)
* Save any existing channel configuration, such as your analog sensors, as this starter configuration will overwrite your current configuration.
    offset = offset + 1
* Unzip the downloaded AIM SmartyCAM configuration and extract the .rcp file.
    local value = 0
* Connect the RaceCapture app to your RaceCapture system
    while len > 0 do
* Go to Setup, and press '''Open''' to open the unzipped configuration file.
        value = (value * 256) + data[offset]
* Press '''Write''' to write the configuration to your RaceCapture system.
        offset = offset + 1
* Switch to the Dashboard view to monitor and verify the AIM SmartyCAM channels.
        len = len - 1
    end
    setChannel(cid, (value * mult) + add)
end


map_chan = (be_mode == 1) and map_chan_be or map_chan_le
'''Important Note'''
initCAN(CAN_chan, CAN_baud)
* If you are converting from the Lua script integration to direct CAN mapping, be sure to completely remove your Lua script mapping by erasing the Lua scripting window and writing the configuration back to RaceCapture.
setTickRate(tickRate)
* Full guide on [[AIM_Integration_CAN_Mapping|CAN Mapping here]].
</pre>

Latest revision as of 14:55, 21 June 2019

Introduction

Note: This is the old way using Lua Script. Please see the new way to integrate with your AIM Data Logging system using CAN mapping.

This CAN bus integration maps CAN bus data from AIM systems using the CAN protocol used for the SmartyCam camera system.

Connecting to the AIM system

AIM RCP pinout mapping.png

AIM cable connection mapping
Connection AIM Pin (Binder 702) RaceCapture/Pro Pin (EIA-T568B Ethernet cable)
CAN High 1 (White) 2 (Orange)
CAN Low 4 (Blue) 3 (Green / White)
Ground 2 (Brown) 1 (Orange / White)
VBExt 3 N/C (Do not connect)

Note

  • RaceCapture/Pro provides a 12v input pin (Pin 8) on the RJ45 connector, which has a common connection to the 12v input of the RaceCapture/Pro terminal block.
  • This pin is rated at 1A max. We do not recommend using this pin to supply power to the AIM Smarty CAM.

Available Channels

This integration enables the following channels.

This assumes the AIM channels 1-5 are defined with the following configuration. You can customize this mapping based on your particular AIM configuration.

BMW E46 (including M3)
AIM Channel Name RaceCapture channel name
RPM RPM
Gear Gear
WaterTemp EngineTemp
Oil Press OilPress
Oil Temp OilTemp
Throttle Position TPS
Head Temp HeadTemp
Exhaust Temp EGT
Brake Pos (channel 1) BrakePos
Clutch Pos (channel 2) Clutch
Brake Press (channel 3) Brake
Steer Position (channel 4) Steering
Lambda (channel 5) Lambda
FuelLevel FuelLevel

Integration Cable

Build your own

AIM uses a Binder 5-pin series 702 connector - you can modify an existing compatible cable, or make a custom cable with the appropriate connectors and splice it with an RJ45 network cable.

Get a pre-made cable

We have AIM integration cables available in our online store:

AIM RCP integration cable.jpg

Add to cart.png

AIM Integration configuration

Direct CAN channel Mapping

RaceCapture AIM channel mapping.png

Download this starter configuration to instantly import 16 pre-configured channels mapped to your AIM Smarty Cam data.

Instructions:

  • Save any existing channel configuration, such as your analog sensors, as this starter configuration will overwrite your current configuration.
  • Unzip the downloaded AIM SmartyCAM configuration and extract the .rcp file.
  • Connect the RaceCapture app to your RaceCapture system
  • Go to Setup, and press Open to open the unzipped configuration file.
  • Press Write to write the configuration to your RaceCapture system.
  • Switch to the Dashboard view to monitor and verify the AIM SmartyCAM channels.

Important Note

  • If you are converting from the Lua script integration to direct CAN mapping, be sure to completely remove your Lua script mapping by erasing the Lua scripting window and writing the configuration back to RaceCapture.
  • Full guide on CAN Mapping here.