CoilX: Difference between revisions

(added pictures)
Line 10: Line 10:
==Wiring Information==
==Wiring Information==


===Sensor
===Sensor Connections===
[[Image:CoilX_sensor_connection.png]]
 
Use 22 gauge wire to solder the connections to the CoilX module.  
Use 22 gauge wire to solder the connections to the CoilX module.  



Revision as of 07:39, 23 January 2014

Description

CoilX brd.png

CoilX is a sensor module that safely intercepts the RPM signal from an ignition coil primary circuit into a clean 5v logic-level square wave that can be safely handled by the RaceCapture/Pro Timer / RPM input or other devices.

The module features an optically isolated circuit with additional filtering, to help prevent false triggers.

The 1" x 0.5" compact board is designed to be assembled with heat shrink and bundled in-line with your wiring harness.

Wiring Information

Sensor Connections

CoilX sensor connection.png

Use 22 gauge wire to solder the connections to the CoilX module.

Coilx wiring sm.jpg

Be sure to clip the soldered wires flush to prevent sharp surfaces.

Coilx backside clip.jpg

Slip then module into a length of heat shrink tubing or wrap in electrical tape to insulate the module. You can include this assembly with your wiring harness bundle.

Technical Information