Emtron: Difference between revisions

Line 12: Line 12:
===TPS===
===TPS===
* CAN ID: 1251
* CAN ID: 1251
* Bytes: 1,2
* Bytes: 1,2 (little endian)
* Scaling: 0 = -100.0% ; 2000 = 100.0%
* Scaling: 1000 = 0.0% ; 2000 = 100.0%
* Precision: 0.1


==Lua Script==
==Lua Script==

Revision as of 21:56, 12 February 2015

Emtron ECU

Emtron KV8.jpg

Configuration

This script integrates the Emtron ECU with RaceCapture/Pro telemetry, using the factory standard CAN bus mapping

Baud Rate

The default baud rate for Emtron is 1mbps.

  • You can configure this on the CAN bus configuration page in the RaceCapture App.

Channels

TPS

  • CAN ID: 1251
  • Bytes: 1,2 (little endian)
  • Scaling: 1000 = 0.0% ; 2000 = 100.0%
  • Precision: 0.1

Lua Script


setTickRate(30) --30Hz

--set up virtual channels
tps_id = addChannel("TPS", 10, 1)

--handle TPS message data
function process_tps(data)
    local tps = (data[2] * 256 + data[1]) * 0.1
    setChannel(tps_id, tps)
end

function onTick()
    repeat --will drain CAN buffer on each tick
        id, e, data = rxCAN(0)
        if id == 1251 then process_tps(data) end
    until id == nil
end