Harness specifications: Difference between revisions

 
(79 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Analog / Digital Harness System=
https://i.imgur.com/sZcvrLp.mp4
Click on the cable components to see details:
 
=Plug and Play harness system=
[[#Analog_harness|Jump to the Analog/Digital Harness system]]
==CAN bus Harness==
The plug and play CAN bus harness system lets you easily connect CAN bus devices to your RaceCapture or PodiumConnect system, without the need to splice, crimp, or heat-shrink connections. Multiple-length extension cables lets you build a harness that perfectly matches your installation needs.
 
* '''Note''' The inline CAN terminator only needs to be added once, near the last device connected to the end of the network
 
Click on the items within the image to see details.
<imagemap>Image:combined_CAN_harnesses.jpg|Subtitle of Image Map combined_CAN_harnesses.jpg
rect 162 3 551 737 [[#Dual_CAN_splitter|]]
rect 618 8 930 531 [[#Dual_CAN_interconnect|]]
rect 577 538 969 784 [[#Powered_dual_CAN_hub|]]
rect 277 914 685 1491 [[#CAN_extension|]]
rect 217 1503 669 2345 [[#CAN_splitter|]]
rect 300 2452 723 2643 [[#Inline_CAN_terminator|]]
rect 60 2767 258 3543 [[#Power_CAN_pigtail|]]
rect 503 3510 948 3697 [[AnalogX2|]]
rect 479 3341 906 3512 [[ShiftX3|]]
rect 488 3127 907 3333 [[TireX|]]
</imagemap>
 
==Analog harness==
The plug and play Analog/Digital harness system lets you easily connect individual sensors to your RaceCapture system, without the need to splice, crimp, or heat shrink connections. Multiple-length extension cables for each level lets you build a harness that perfectly matches your installation needs.
 
* '''Note:''' The same 8 channel connector (and downstream connectors) can plug into an M12-12P analog port or the M12-12P digital port of the system.
 
Click on the items within the image to see details.
 
<imagemap>Image:combined_analog_harnesses.jpg|Subtitle of Image Map combined_analog_harnesses.jpg
<imagemap>Image:combined_analog_harnesses.jpg|Subtitle of Image Map combined_analog_harnesses.jpg
rect 456 24 632 698 [[#8_channel_extension|]]
rect 309 18 630 707 [[#8_channel_extension|]]
rect 387 709 569 1411 [[#8_to_4_channel_splitter|]]
rect 222 710 573 1408 [[#8_to_4_channel_splitter|]]
rect 591 711 697 1432 [[#8_channel_pigtail|]]
rect 581 709 882 1385 [[#8_channel_pigtail|]]
rect 381 1416 455 1946 [[#4_channel_extension|]]
rect 405 1414 762 1942 [[#4_channel_extension|]]
rect 448 1956 535 2499 [[#4_channel_pigtail|]]
rect 173 1962 532 2669 [[#4_channel_splitter|]]
rect 145 1957 445 2637 [[#4_channel_splitter|]]
rect 516 1962 773 2478 [[#4_channel_pigtail|]]
rect 141 2676 194 3146 [[#Single_channel_extension|]]
rect 299 2675 673 3143 [[#Single_channel_extension|]]
rect 12 3179 59 3789 [[#Single_channel_pigtail|]]
rect 166 3176 268 3789 [[#Single_channel_pigtail|]]
rect 121 3162 215 3833 [[#Pressure_sensor|]]
rect 310 3176 410 3840 [[#Pressure_sensor|]]
rect 253 3159 340 3738 [[#Linear_temperature_sensor|]]
rect 441 3176 545 3725 [[#Linear_temperature_sensor|]]
</imagemap>
</imagemap>


=CAN bus harness components=
==Dual CAN splitter==
M8-6P male to dual M8-4P female splits CAN1/CAN2 into individual CAN1 and CAN2 connections.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/can1-can2-dual-can-splitter/]]
Limited power (1A @ 12v) is provided to devices connected to CAN1 and CAN2. For higher power requirements, please use the [[#Powered_dual_CAN_hub|Powered Dual CAN Hub]]
* A connection: connects to CAN1
* B connection: connects to CAN2
[[image:ASL_DUAL_CAN_SPLITTER_diagram.jpg]]
[[image:ASL_DUAL_CAN_SPLITTER.jpg|700px]]
==Dual CAN interconnect==
M8-6P male to M8-6P male link cable for connecting two CAN bus networks to our [[#Powered_dual_CAN_hub|Powered Dual CAN Hub]]. 1 meter length.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/racecapture-m8-to-dual-can-bus-link-cable/]]
[[image:ASL_DUAL_CAN_M8_1M_diagram.jpg]]
[[image:ASL_DUAL_CAN_M8_1M.jpg|500px]]
==Powered dual CAN hub==
Powered CAN hub featuring 8 ports (4 ports for CAN1 and 4 ports for CAN2). Use with the [[#Dual_CAN_interconnect|Dual CAN interconnect]] cable to link to your RaceCapture or PodiumConnect system.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/powered-8-port-dual-can-bus-hub-kit/]]
[[image:powered_8_port_dual_can_hub_3quarter.jpg|500px]]
==CAN extension==
M8-4P male to M8-4P female cable extends a CAN bus network. Available in 0.5, 1, 2, 3, and 4 meter lengths. [[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/can-bus-extension-cable/]]
* Power rated at 1A (12watts at 12v)
[[image:ASL_M8_CAN_EXT_0.5M_1M_2M_3M_4M_diagram.jpg]]
[[image:CAN_extension_cable.jpg|700px]]
==CAN splitter==
M8-4P male to dual M8-4P splits a single CAN bus so a device can be inserted in the middle of a CAN bus network.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/can-bus-splitter/]]
* '''Note''': stub length to devices should be about 300mm maximum, including length of Y adapter branch.
The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two 10cm connections with M8 4P female connectors on each end, wired in parallel.
[[image:ASL_CAN_SPLITTER_diagram.jpg]]
[[image:can_splitter_y_adapter.jpg|700px]]
==Inline CAN terminator==
M8-4P male to M8-4P female inline 120 ohm CAN terminator - place one near end of the CAN bus network to ensure signal integrity.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/inline-can-terminator/]]
* '''Note''': Only one terminator should be used at the end of the network/cable-run.
[[image:ASL_CAN_TERMINATOR_diagram.jpg]]
[[image:inline_can_terminator.jpg|500px]]
==Power CAN pigtail==
M8-4P male to pigtail for connecting custom device to the Plug and Play cabling system, or for powering a RaceCapture or PodiumConnect system. 2 meter length.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/power-can-pigtail/]]
{| class="wikitable"
|-
! Pin !! Color !! Connection
|-
| 1 || White || CAN low
|-
| 2 || Red || 9-24v / 1A (~12W)
|-
| 3 || Green || CAN high
|-
| 4 || Black || Ground
|}
[[image:ASL_POWER_CAN_PIGTAIL_2M_diagram.jpg]]
[[image:CAN_power_pigtail.jpg|600px]]
==CAN+power for device==
M8-4P female to pigtail for a custom-wired non Plug and Play connection to one of our CAN bus enabled devices such as TireX, AnalogX2, or ShiftX3
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/can-power-pigtail-for-device/]]
{| class="wikitable"
|-
! Pin !! Color !! Connection
|-
| 1 || White || CAN low
|-
| 2 || Red || 9-24v / 1A (~12W)
|-
| 3 || Green || CAN high
|-
| 4 || Black || Ground
|}
[[image:ASL_DEVICE_CAN_PIGTAIL_1M_diagram.jpg]]
[[image:ASL_DEVICE_CAN_PIGTAIL_1M.jpg|500px]]
=Analog / Digital harness components=
==8 channel extension==
==8 channel extension==
Male to Female M12 12P cable extends 8 analog or digital channels. Available in 1 or 2 meter lengths. [https://www.autosportlabs.com/product/8x_sensor_extension_cable/ View Product]
Male to Female M12 12P cable extends 8 analog or digital channels. Available in 1 or 2 meter lengths.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/8x_sensor_extension_cable/]]


[[file:ASL_M12_OCTO_SENSOR_EXTENSION_1M_2M_diagram.jpg]]
[[file:ASL_M12_OCTO_SENSOR_EXTENSION_1M_2M_diagram.jpg]]


[[file:ASL_M12_OCTO_SENSOR_EXTENSION_1M_2M_1024.jpg]]
[[file:ASL_M12_OCTO_SENSOR_EXTENSION_1M_2M_1024.jpg|700px]]


==8 to 4 channel splitter==
==8 to 4 channel splitter==
M12-12P male to dual M8-8P female connector splits 8 analog or digital channels into dual 4 channel connections. [https://www.autosportlabs.com/product/8-to-4-channel-sensor-splitter/ Product Info]
M12-12P male to dual M8-8P female connector splits 8 analog or digital channels into dual 4 channel connections.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/8-to-4-channel-sensor-splitter/]]
 
* Connections
** Channels 1-4 are connected to the 'A' branch
** Channels 5-8 are connected to the 'B' branch


[[image:ASL_OCTO_SENSOR_SPLITTER_diagram.jpg]]
[[image:ASL_OCTO_SENSOR_SPLITTER_diagram.jpg]]


[[image:ASL_OCTO_SENSOR_SPLITTER_1024.jpg]]
[[image:ASL_OCTO_SENSOR_SPLITTER_1024.jpg|700px]]


==8 channel pigtail==
==8 channel pigtail==
M12-12P 0.3 meter male pigtail breaks out 8 analog or digital channels. [https://www.autosportlabs.com/product/8-channel-analog-digital-sensor-pigtail/ Product Info]
M12-12P 0.3 meter male pigtail breaks out 8 analog or digital channels.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/8-channel-analog-digital-sensor-pigtail/]]
 
* 24 AWG
 
{| class="wikitable"
|-
! Pin !! Color !! Connection !! Analog Mapping !! Digital Mapping
|-
| 1 || Blue || Analog/Digital B1 || Analog 5 || GPIO 1
|-
| 2 || Yellow || Analog/Digital B2 || Analog 6 || GPIO 2
|-
| 3 || Green || Analog/Digital B4 || Analog 8 || GPIO 4
|-
| 4 || Pink || Analog/Digital A1 || Analog 1 || Timer/RPM 1
|-
| 5 || White || Analog/Digital A2 || Analog 2 || Timer/RPM 2
|-
| 6 || Red || Vref || 5v @ 0.5A || 5v @ 0.5A
|-
| 7 || Violet || Analog/Digital A3 || Analog 3 || Timer/RPM 3
|-
| 8 || Orange || Analog/Digital A4 || Analog 4 || Timer/RPM 4
|-
| 9 || Light Green || Analog/Digital B3 || Analog 7 || GPIO 3
|-
| 10 || Grey || Ground || ||
|-
| 11 || Brown || Ground || ||
|-
| 12 || Black ||  Ground ||
|}


[[image:ASL_M12_OCTO_SENSOR_PIGTAIL_0.3M_diagram.jpg]]
[[image:ASL_M12_OCTO_SENSOR_PIGTAIL_0.3M_diagram.jpg]]


[[image:ASL_M12_OCTO_SENSOR_PIGTAIL_0.3M_1024.jpg]]
[[image:ASL_M12_OCTO_SENSOR_PIGTAIL_0.3M_1024.jpg|700px]]


==4 channel extension==
==4 channel extension==
M8-4P male to M8-4P female cable extends 4 analog or digital channels. Available in 1 and 2 meter lengths. [https://www.autosportlabs.com/product/4-channel-sensor-extension-cable/ Product Info]
M8-4P male to M8-4P female cable extends 4 analog or digital channels. Available in 1 and 2 meter lengths.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/4-channel-sensor-extension-cable/]]


[[image:ASL_M8_QUAD_SENSOR_EXTENSION_1M_2M_diagram.jpg]]
[[image:ASL_M8_QUAD_SENSOR_EXTENSION_1M_2M_diagram.jpg]]


[[image:ASL_M8_QUAD_SENSOR_EXTENSION_1M_2M_1024.jpg]]
[[image:ASL_M8_QUAD_SENSOR_EXTENSION_1M_2M_1024.jpg|700px]]


==4 channel pigtail==
==4 channel pigtail==
M8-8P male pigtail for 4 analog or digital channels. 1 meter length. [https://www.autosportlabs.com/product/quad-analog-digital-sensor-pigtail/ Product Info]
M8-8P male pigtail for 4 analog or digital channels. 1 meter length.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/quad-analog-digital-sensor-pigtail/]]
 
* 24 AWG
{| class="wikitable"
|-
! Pin !! Color !! Connection
|-
| 1 || White || Analog/Digital 1
|-
| 2 || Yellow || Analog/Digital 2
|-
| 3 || Grey || Analog/Digital 4
|-
| 4 || Red || 5v reference
|-
| 5 || Brown || Ground
|-
| 6 || Pink || 5v reference
|-
| 7 || Blue || Analog/Digital 3
|-
| 8 || Green || Ground
|}


[[image:ASL_M8_QUAD_SENSOR_PIGTAIL_1M_diagram.jpg]]
[[image:ASL_M8_QUAD_SENSOR_PIGTAIL_1M_diagram.jpg]]
Line 50: Line 242:


==4 channel splitter==
==4 channel splitter==
M8-8P Male splits 4 analog or digital channels into 4 M8-3P female connections. [https://www.autosportlabs.com/product/4-channel-analog-digital-sensor-splitter/ Product Info]
M8-8P Male splits 4 analog or digital channels into 4 M8-3P female connections.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/4-channel-analog-digital-sensor-splitter/]]
 
* Connections
** P1 : upstream connection
** P2 - P5: 1st through last channel connection for this splitter


[[image:ASL_QUAD_SENSOR_SPLITTER_diagram.jpg]]
[[image:ASL_QUAD_SENSOR_SPLITTER_diagram.jpg]]


[[image:ASL_QUAD_SENSOR_SPLITTER.jpg]]
[[image:ASL_QUAD_SENSOR_SPLITTER.jpg|700px]]


==Single channel extension==
==Single channel extension==
M8-3P male to M3-3P female extends a single analog or digital channel. Available in 1, 2, 3, and 4 meter lengths. [https://www.autosportlabs.com/product/analog-digital-sensor-extension/ Product Info]
M8-3P male to M3-3P female extends a single analog or digital channel. Available in 1, 2, 3, and 4 meter lengths.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/analog-digital-sensor-extension/]]


[[image:ASL_M8_SENSOR_EXTENSION_1M_2M_3M_4M_diagram.jpg]]
[[image:ASL_M8_SENSOR_EXTENSION_1M_2M_3M_4M_diagram.jpg]]


[[image:ASL_M8_SENSOR_EXTENSION_1M_2M_3M_4M.jpg]]
[[image:ASL_M8_SENSOR_EXTENSION_1M_2M_3M_4M.jpg|700px]]


==Single channel pigtail==
==Single channel pigtail==
M8-3P male pigtail for a single analog or digital connection. 2 meter length. [https://www.autosportlabs.com/product/analog-digital-sensor-pigtail/ Product Info]
M8-3P male pigtail for a single analog or digital connection. 2 meter length.
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/analog-digital-sensor-pigtail/]]
 
* 24 AWG
{| class="wikitable"
|-
! Pin !! Color !! Connection
|-
| 1 || Brown || Ground
|-
| 3 || Blue || 5v
|-
| 4 || Black || Signal Input
|}


[[image:ASL_M8_SENSOR_PIGTAIL_2M_diagram.jpg]]
[[image:ASL_M8_SENSOR_PIGTAIL_2M_diagram.jpg]]


[[image:ASL_M8_SENSOR_PIGTAIL_2M.jpg]]
[[image:ASL_M8_SENSOR_PIGTAIL_2M.jpg|700px]]


==Pressure sensor==
==Pressure sensor==
M8-3P male to 3 pin Delphi GT150 pressure sensor connector. 2 meter length. [https://www.autosportlabs.com/product/10-bar-150-psi-pressure-sensor-with-plug-and-play-harness/ 10 bar/150 PSI Product Info] [https://www.autosportlabs.com/product/150-bar-2175-psi-pressure-sensor-with-plug-and-play-harness/ 150 bar/2175 PSI Product Info]
M8-3P male to 3 pin Delphi GT150 pressure sensor connector. 2 meter length.  
 
* 10 bar/150 PSI [[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/10-bar-150-psi-pressure-sensor-with-plug-and-play-harness/]]
* 150 bar/2175 PSI [[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/150-bar-2175-psi-pressure-sensor-with-plug-and-play-harness/]]
 
{| class="wikitable"
|-
! M8 Pin !! GT150 Pin !! Connection
|-
| 1 || A || Ground
|-
| 3 || B || 5v Power
|-
| 4 || C || Signal
|}
 


[[image:ASL_DELPHI3_M8_diagram.jpg]]
[[image:ASL_DELPHI3_M8_diagram.jpg]]


[[image:ASL_DELPHI3_M8_pressure_sensor.jpg]]
[[image:ASL_DELPHI3_M8_pressure_sensor.jpg|700px]]


==Linear temperature sensor==
==Linear temperature sensor==
M8-3P male to linear temperature sensor. 2 meter length. [https://www.autosportlabs.com/product/40-to-150c-linear-temperature-sensor-with-plug-and-play-harness/ Product Info]
M8-3P male to linear temperature sensor. 2 meter length.  
[[Image:add_to_cart.png|link=https://www.autosportlabs.com/product/40-to-150c-linear-temperature-sensor-with-plug-and-play-harness/]]


[[image:ASL_LINEAR_TEMP_M8_diagram.jpg]]
[[image:ASL_LINEAR_TEMP_M8_diagram.jpg]]


[[image:ASL_LINEAR_TEMP_M8.jpg]]
[[image:ASL_LINEAR_TEMP_M8.jpg|700px]]


=Standard connectors and pinouts=
=Standard connectors and pinouts=
Line 210: Line 437:
|-
|-
| 12 || Ground ||  
| 12 || Ground ||  
|}
=Available cabling=
==CAN extension cables==
Each CAN extension cable includes a M8 male to M8 female connector. Power rated at 1A (12watts at 12v)
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_M8_CAN_EXT_0.5M || 0.5 meter CAN extension cable
|-
| ASL_M8_CAN_EXT_1M || 1 meter CAN extension cable
|-
| ASL_M8_CAN_EXT_2M || 2 meter CAN extension cable
|-
| ASL_M8_CAN_EXT_3M || 3 meter CAN extension cable
|-
| ASL_M8_CAN_EXT_4M || 4 meter CAN extension cable
|}
==CAN splitter==
The CAN splitter/y-adapter splits a single CAN bus so a device can be inserted within a loop.
* '''Note''': stub length to devices should be 300mm maximum, including length of Y adapter branch.
The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two 10cm connections with M8 4P female connectors on each end, wired in parallel to the feed input.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_CAN_SPLITTER || Single channel CAN splitter
|}
==M8 Power + CAN pigtail==
Used as a primary power + single CAN bus connection to enable a one cable power + data solution to the Dual CAN hub or RaceCapture.
M8 4P male on one end, pigtails on the other.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_POWER_CAN_PIGTAIL_2M || Power + CAN pigtail, 2 meter
|}
===Pinout===
* Red / Pin 2: +12v
* Black / Pin 4: Ground
* White / Pin 1: CAN Low
* Green / Pin 3: CAN High
==M8 Power + CAN device pigtail==
Used to provide power + CAN to a CAN device such as AnalogX, TireX, ShiftX3, etc. for a '''non plug and play installation''', such as custom-wired application.
* '''Note''' For a plug and play installation, use the [[Harness_specifications#CAN_extension_cables|CAN extension cables]] to integrate with the CAN.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_DEVICE_CAN_PIGTAIL_1M || Power + CAN pigtail for individual devices, 1 meter
|}
===Pinout===
* Red / Pin 2: +12v
* Black / Pin 4: Ground
* White / Pin 1: CAN Low
* Green / Pin 3: CAN High
==Dual CAN interconnect (RJ45)==
Designed to link RaceCapture/Pro MK2,MK3 and RaceCapture Track MK1/MK2 to powered dual CAN hub
* RJ45 to M8 6P male, 1 meter length
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
|  ASL_DUAL_CAN_RJ45_M8_1M || Dual CAN RJ45 to M8 6P male, 1 meter
|}
==Dual CAN interconnect==
Interconnect designed to link powered dual CAN hub
* M8 6P male to M8 6P male, 1 meter length
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
|  ASL_DUAL_CAN_M8_1M || Dual CAN M8 6P male to M8 6P male, 1 meter
|}
==Inline CAN terminator==
Single channel 120 ohm terminator designed to insert inline into a harness. Consists of a compact M8 4P male to M8 4P female.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
|  ASL_CAN_TERMINATOR || Inline CAN terminator, M8 4P
|}
=Analog/Digital cabling=
==Sensor Pigtail==
The sensor pigtail consists of a M8 3P Male to prepared ends, with 24 AWG conductors.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
|  ASL_M8_SENSOR_PIGTAIL_2M || M8 3P to bare wire sensor pigtail, 2M, 24 AWG
|}
==Sensor Extension Cable==
Extends an analog sensor connection. Cable consists of an M8 3P male to M8 3P female connection.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
|  ASL_M8_SENSOR_EXTENSION_1M || M8 3P sensor extension cable, 1 meter
|-
|  ASL_M8_SENSOR_EXTENSION_2M || M8 3P sensor extension cable, 2 meter
|-
|  ASL_M8_SENSOR_EXTENSION_3M || M8 3P sensor extension cable, 3 meter
|-
|  ASL_M8_SENSOR_EXTENSION_4M || M8 3P sensor extension cable, 4 meter
|}
==Quad analog/digital sensor splitter==
Splits 4 analog/digital channels to individual sensors.
Feed input is a 15cm feed to an M8 8P male connector.  Each split channel is on a 15cm stub, with M8 3P female connector
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_4X_SENSOR_SPLITTER || 4X analog / digital sensor splitter
|}
==Quad Sensor to bare wires pigtail==
Provides a bare wire pigtail for 4x analog/digital sensors, suitable for '''non plug and play''' installations for AnalogX/GPIOx, etc.
* '''Note''' For plug and play installations, use a combination of the quad analog/digital sensor splitter, extension cables and plug and play sensors.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_M8_QUAD_SENSOR_PIGTAIL_1M || M8 8P male to bare wire quad sensor pigtail, 1M, 24AWG
|}
===Pinout===
* White / Pin 1 : Analog/Digital 1
* Yellow / Pin 2 : Analog/Digital 2
* Gray / Pin 3 : Analog/Digital 4
* Red / Pin 4 : 5v reference
* Brown / Pin 5 : Ground
* Pink / Pin 6 : 5v reference
* Blue / Pin 7 : Analog/Digital 3
* Green / Pin 8 : Ground
==Delphi GT150 sensor interconnect==
Connects a single Analog channel to a Delphi GT150 sensor connection.
* Typically used for pressure sensors. Compatible with 10 and 150 bar Autosport Labs sensors.
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_DELPHI3_M8 || Delphi GT150 3 pin to M8, 2 meters
|}
==Autosport Labs Linear temperature sensor==
Connects a single analog channel to the Autosport Labs linear temperature sensor.
* '''Note''' - sensor is integrated into the end of the cable
{| class="wikitable"
|-
! Orderable SKU !! Description
|-
| ASL_LINEAR_TEMP_M8 || Autosport Labs linear temperature to M8, 2 meters
|}
|}

Latest revision as of 14:21, 30 August 2023

https://i.imgur.com/sZcvrLp.mp4

Plug and Play harness system

Jump to the Analog/Digital Harness system

CAN bus Harness

The plug and play CAN bus harness system lets you easily connect CAN bus devices to your RaceCapture or PodiumConnect system, without the need to splice, crimp, or heat-shrink connections. Multiple-length extension cables lets you build a harness that perfectly matches your installation needs.

  • Note The inline CAN terminator only needs to be added once, near the last device connected to the end of the network

Click on the items within the image to see details.

Subtitle of Image Map combined_CAN_harnesses.jpg
About this image

Analog harness

The plug and play Analog/Digital harness system lets you easily connect individual sensors to your RaceCapture system, without the need to splice, crimp, or heat shrink connections. Multiple-length extension cables for each level lets you build a harness that perfectly matches your installation needs.

  • Note: The same 8 channel connector (and downstream connectors) can plug into an M12-12P analog port or the M12-12P digital port of the system.

Click on the items within the image to see details.

Subtitle of Image Map combined_analog_harnesses.jpg
About this image

CAN bus harness components

Dual CAN splitter

M8-6P male to dual M8-4P female splits CAN1/CAN2 into individual CAN1 and CAN2 connections. Add to cart.png

Limited power (1A @ 12v) is provided to devices connected to CAN1 and CAN2. For higher power requirements, please use the Powered Dual CAN Hub

  • A connection: connects to CAN1
  • B connection: connects to CAN2

ASL DUAL CAN SPLITTER diagram.jpg

ASL DUAL CAN SPLITTER.jpg

Dual CAN interconnect

M8-6P male to M8-6P male link cable for connecting two CAN bus networks to our Powered Dual CAN Hub. 1 meter length. Add to cart.png

ASL DUAL CAN M8 1M diagram.jpg

ASL DUAL CAN M8 1M.jpg

Powered dual CAN hub

Powered CAN hub featuring 8 ports (4 ports for CAN1 and 4 ports for CAN2). Use with the Dual CAN interconnect cable to link to your RaceCapture or PodiumConnect system. Add to cart.png

Powered 8 port dual can hub 3quarter.jpg

CAN extension

M8-4P male to M8-4P female cable extends a CAN bus network. Available in 0.5, 1, 2, 3, and 4 meter lengths. Add to cart.png


  • Power rated at 1A (12watts at 12v)

ASL M8 CAN EXT 0.5M 1M 2M 3M 4M diagram.jpg

CAN extension cable.jpg

CAN splitter

M8-4P male to dual M8-4P splits a single CAN bus so a device can be inserted in the middle of a CAN bus network. Add to cart.png

  • Note: stub length to devices should be about 300mm maximum, including length of Y adapter branch.

The Y adapter includes a 15cm feed connection with a M8 4P male connector, with two 10cm connections with M8 4P female connectors on each end, wired in parallel.

ASL CAN SPLITTER diagram.jpg

Can splitter y adapter.jpg

Inline CAN terminator

M8-4P male to M8-4P female inline 120 ohm CAN terminator - place one near end of the CAN bus network to ensure signal integrity. Add to cart.png

  • Note: Only one terminator should be used at the end of the network/cable-run.

ASL CAN TERMINATOR diagram.jpg

Inline can terminator.jpg

Power CAN pigtail

M8-4P male to pigtail for connecting custom device to the Plug and Play cabling system, or for powering a RaceCapture or PodiumConnect system. 2 meter length. Add to cart.png

Pin Color Connection
1 White CAN low
2 Red 9-24v / 1A (~12W)
3 Green CAN high
4 Black Ground

ASL POWER CAN PIGTAIL 2M diagram.jpg

CAN power pigtail.jpg

CAN+power for device

M8-4P female to pigtail for a custom-wired non Plug and Play connection to one of our CAN bus enabled devices such as TireX, AnalogX2, or ShiftX3 Add to cart.png

Pin Color Connection
1 White CAN low
2 Red 9-24v / 1A (~12W)
3 Green CAN high
4 Black Ground

ASL DEVICE CAN PIGTAIL 1M diagram.jpg

ASL DEVICE CAN PIGTAIL 1M.jpg

Analog / Digital harness components

8 channel extension

Male to Female M12 12P cable extends 8 analog or digital channels. Available in 1 or 2 meter lengths. Add to cart.png

ASL M12 OCTO SENSOR EXTENSION 1M 2M diagram.jpg

ASL M12 OCTO SENSOR EXTENSION 1M 2M 1024.jpg

8 to 4 channel splitter

M12-12P male to dual M8-8P female connector splits 8 analog or digital channels into dual 4 channel connections. Add to cart.png

  • Connections
    • Channels 1-4 are connected to the 'A' branch
    • Channels 5-8 are connected to the 'B' branch

ASL OCTO SENSOR SPLITTER diagram.jpg

ASL OCTO SENSOR SPLITTER 1024.jpg

8 channel pigtail

M12-12P 0.3 meter male pigtail breaks out 8 analog or digital channels. Add to cart.png

  • 24 AWG
Pin Color Connection Analog Mapping Digital Mapping
1 Blue Analog/Digital B1 Analog 5 GPIO 1
2 Yellow Analog/Digital B2 Analog 6 GPIO 2
3 Green Analog/Digital B4 Analog 8 GPIO 4
4 Pink Analog/Digital A1 Analog 1 Timer/RPM 1
5 White Analog/Digital A2 Analog 2 Timer/RPM 2
6 Red Vref 5v @ 0.5A 5v @ 0.5A
7 Violet Analog/Digital A3 Analog 3 Timer/RPM 3
8 Orange Analog/Digital A4 Analog 4 Timer/RPM 4
9 Light Green Analog/Digital B3 Analog 7 GPIO 3
10 Grey Ground
11 Brown Ground
12 Black Ground

ASL M12 OCTO SENSOR PIGTAIL 0.3M diagram.jpg

ASL M12 OCTO SENSOR PIGTAIL 0.3M 1024.jpg

4 channel extension

M8-4P male to M8-4P female cable extends 4 analog or digital channels. Available in 1 and 2 meter lengths. Add to cart.png

ASL M8 QUAD SENSOR EXTENSION 1M 2M diagram.jpg

ASL M8 QUAD SENSOR EXTENSION 1M 2M 1024.jpg

4 channel pigtail

M8-8P male pigtail for 4 analog or digital channels. 1 meter length. Add to cart.png

  • 24 AWG
Pin Color Connection
1 White Analog/Digital 1
2 Yellow Analog/Digital 2
3 Grey Analog/Digital 4
4 Red 5v reference
5 Brown Ground
6 Pink 5v reference
7 Blue Analog/Digital 3
8 Green Ground

ASL M8 QUAD SENSOR PIGTAIL 1M diagram.jpg

ASL M8 QUAD SENSOR PIGTAIL 1M.jpg

4 channel splitter

M8-8P Male splits 4 analog or digital channels into 4 M8-3P female connections. Add to cart.png

  • Connections
    • P1 : upstream connection
    • P2 - P5: 1st through last channel connection for this splitter

ASL QUAD SENSOR SPLITTER diagram.jpg

ASL QUAD SENSOR SPLITTER.jpg

Single channel extension

M8-3P male to M3-3P female extends a single analog or digital channel. Available in 1, 2, 3, and 4 meter lengths. Add to cart.png

ASL M8 SENSOR EXTENSION 1M 2M 3M 4M diagram.jpg

ASL M8 SENSOR EXTENSION 1M 2M 3M 4M.jpg

Single channel pigtail

M8-3P male pigtail for a single analog or digital connection. 2 meter length. Add to cart.png

  • 24 AWG
Pin Color Connection
1 Brown Ground
3 Blue 5v
4 Black Signal Input

ASL M8 SENSOR PIGTAIL 2M diagram.jpg

ASL M8 SENSOR PIGTAIL 2M.jpg

Pressure sensor

M8-3P male to 3 pin Delphi GT150 pressure sensor connector. 2 meter length.

  • 10 bar/150 PSI Add to cart.png
  • 150 bar/2175 PSI Add to cart.png
M8 Pin GT150 Pin Connection
1 A Ground
3 B 5v Power
4 C Signal


ASL DELPHI3 M8 diagram.jpg

ASL DELPHI3 M8 pressure sensor.jpg

Linear temperature sensor

M8-3P male to linear temperature sensor. 2 meter length. Add to cart.png

ASL LINEAR TEMP M8 diagram.jpg

ASL LINEAR TEMP M8.jpg

Standard connectors and pinouts

The following represents connector and pinout standard for power, CAN, and analog/digital signaling

Interconnects are based on industry-standard M8 and M12 connectors

Power + CAN Single interconnect

  • Connector: M8 4P, A coding

M8 4P male pinout.jpg

Male connector pictured

Pin Connection Notes
1 CAN low White
2 Power Red, 9-24v / 1A (~12W)
3 CAN high Green
4 Ground Black

Power is standard automotive 12-14v (nominal).

The M8 is an industry standard connector; field-wireable connectors for the M8 4P and other variants are available from 3rd parties:

Dual CAN + power interconnect

  • Connector: M8 6P, A coding

M8 6P male connector.png

Male connector pictured

Pin Connection Notes
1 CAN1 low
2 CAN2 low
3 CAN2 high
4 Ground
5 CAN1 high
6 Power 9-24v / 1A (~12W)

Single analog/digital channel

  • Connector: M8 3P, A coding

M8 3P male connector.png

Male connector pictured

Pin Connection Notes
1 Ground Brown
3 Power Blue (5v @ 1A max)
4 Signal Black

Quad analog/digital channels

  • Connector: M8 8P Male, A coding

M8 8P male pinout.jpg

Pin Connection Notes
1 Analog/Digital 1
2 Analog/Digital 2
3 Analog/Digital 4
4 Vref 5v @ 1A max current, combined with pin 6
5 Ground
6 Vref 5v @ 1A max current, combined with pin 4
7 Analog/Digital 3
8 Ground

Octo analog/digital channels

  • Connector: M8 12P, A coding

M12 12P male connector.png

Male connector pictured

Pin Connection Analog Mapping Digital Mapping
1 Analog/Digital B1 Analog 5 GPIO 1
2 Analog/Digital B2 Analog 6 GPIO 2
3 Analog/Digital B4 Analog 8 GPIO 4
4 Analog/Digital A1 Analog 1 Timer/RPM 1
5 Analog/Digital A2 Analog 2 Timer/RPM 2
6 Vref 5v @ 0.5A 5v @ 0.5A
7 Analog/Digital A3 Analog 3 Timer/RPM 3
8 Analog/Digital A4 Analog 4 Timer/RPM 4
9 Analog/Digital B3 Analog 7 GPIO 3
10 Ground
11 Ground
12 Ground