Help talk:Contents
Revision as of 07:21, 12 August 2008 by Robert verhey (talk | contribs) (Question about RPM output Megajolt)
I have installed the Megajolt successfully in a Willys Jeep M38A1. One question left (for the time being):
In the installation manual you mention about the tachometer output: "This Tach Out signal provides a 12V pulse for every ignition event. "
Has this pulse a constant bandwidth, independent of the RPM? With other words, if connected to (high impedance) voltmeter, is the average voltage of this output lineair with the RPM?
Best regards, Robert Verhey Finspong, Sweden [email protected]
