IgnitionDrivers: Difference between revisions

m (changed IGBT to on Semi)
 
(3 intermediate revisions by 2 users not shown)
Line 3: Line 3:
==Jolt4 Ignition Driver==
==Jolt4 Ignition Driver==


The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the [http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=0271130115BOSCH9385691 Bosch BIP373] , [http://www.fairchildsemi.com/pf/IS/ISL9V3040S3ST.html Fairchild ISL9V3040S3ST] and so on.
The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the [http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=0271130115BOSCH9385691 Bosch BIP373] , [http://www.onsemi.com/PowerSolutions/product.do?id=NGB8202N On Semi NGB8202NT4G] and so on.


[[image:jolt4_brd.png]]
[[image:jolt4_brd.png]]
Line 14: Line 14:
* 10 pin molex connector for ease of use
* 10 pin molex connector for ease of use
* LEDs indicating driver activity (requires additional drive current of 3-6ma)
* LEDs indicating driver activity (requires additional drive current of 3-6ma)
* Heat-sinking from bottom of PC board- transistors are soldered down to PC Board.
* Heat-sinking from ''bottom'' of PC board- transistors are soldered down
* 2.48 x 3.14" board sized to fit our compact aluminum enclosure (or other enclosure accepting 2.5" width PC Boards)
* 2.48 x 3.14" board sized to fit our compact aluminum enclosure (or other enclosure accepting 2.5" width PC Boards)
* Metric sizing for board is 63mm x 80mm


==Connector Pinout==
==Connector Pinout==
Line 24: Line 25:


==Downloads==
==Downloads==
[http://www.autosportlabs.net/asl_dist/jolt4/jolt4.zip Revision A Hardware]
[http://www.autosportlabs.net/asl_dist/jolt4/jolt4_revA.zip Revision A Hardware]

Latest revision as of 22:04, 11 October 2011

Ignition Driver boards

Jolt4 Ignition Driver

The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the Bosch BIP373 , On Semi NGB8202NT4G and so on.

Jolt4 brd.png

Jolt4 sch.png

Features

  • Up to 4 ignition drivers supported
  • 10 pin molex connector for ease of use
  • LEDs indicating driver activity (requires additional drive current of 3-6ma)
  • Heat-sinking from bottom of PC board- transistors are soldered down
  • 2.48 x 3.14" board sized to fit our compact aluminum enclosure (or other enclosure accepting 2.5" width PC Boards)
  • Metric sizing for board is 63mm x 80mm

Connector Pinout

Jolt4 pinout.png

License

This design is released under the Autosport Labs Creative Commons license

Downloads

Revision A Hardware