RaceCapture-Track

Start it up

Plug it in

Unpackage the RaceCapture system and included cable.

• Plug one end of the cable into the RaceCapture unit
• Plug the other end of the cable into your car's OBDII port.
• Place the RaceCapture unit on your dashboard with clear view of the sky. Position the system so it's square to the car's axis.

Download the app

Download the RaceCapture app for your mobile device.

• Google Play
• Amazon App Store
• Apple iOS app store (coming soon)

Connect to your RaceCapture system

In your mobile device WiFI settings, connect to the RaceCapture WiFi network.

• By default, RaceCapture will setup a WiFi network starting with 'RaceCapture', with no password. You can immediately connect to this network.

Once you've connected to the RaceCapture WiFi network, launch the RaceCapture app.

Verifying Connectivity

The RaceCapture app will guide you through a brief automated setup and tour. During this process the connection to RaceCapture will be verified.

Dashboard Mode

To view your dashboard, touch the dashboard option on the main screen.

Customizing a gauge

Most gauges can be customized for the channel and setting visual alerts. Touch the gauge you wish to customize, select the channel you wish to monitor and optionally configure alerts.

Navigating dashboard screens

You can navigate between dashboard screens by swiping left or right, or press the arrow buttons in the lower corners of the screen.

Race tracks and predictive lap timing

RaceCapture offers predictive lap timing, which relies on a robust track detection system leveraging hundreds of track maps worldwide.

How it works

• When GPS receives a lock, RaceCapture will search for a known nearby track.
• If a track is detected with one configuration, it is automatically selected.
• If a track is detected with multiple configurations, the RaceCapture app will prompt you for which configuration you're using.
• If no tracks are detected nearby, the RaceCapture app will offer the ability to create a track on the spot.
  • If you're not able to immediately create the track, you can do so later under Setup.

Setup Mode

You can configure all of RaceCapture's options under the setup page.

• Note: Whenever you make a change on one of these pages, you will need to write your changes back to the RaceCapture device.

Race Tracks

On the RaceTracks page you can create a custom track, which will be included in the library of track maps for automatic detection. To create a custom track, turn off 'Automatic race track detection' and then press the add (+) button. You will be presented with an option to create a circuit or Autocross (point-point) style course. Follow the on-screen instructions to create your track.

GPS

The GPS page allows you to adjust the GPS sample rate and enable/disable various channels.

• Note: We highly recommend you keep the default channels enabled for proper operation of analysis and lap timing.
• 10Hz is the recommended sample rate for the best balance of performance / accuracy. Getting the best GPS performance

Race Timing

These enable the lap timer and predictive lap timer. Leave these 'on' to enable these features.

Analog Sensors

RaceCapture has one analog sensor that measures current battery voltage. The default 1Hz is the recommended sample rate. To disable, set the sample rate to 'Disabled'.

Accel / Gyro

The recommended mounting orientation for RaceCapture is square with the chassis.

• You can re-map channels by re-assigning the physical axis to the mapped channel.
• Once defined, you can calibrate the accelerometer + gyro by pressing the calibrate button, and then pressing the write button to write the calibration back to RaceCapture.

CAN bus

For OBDII operation, ensure the CAN bus is set to On.

• Common baud rates for OBDII is 500K and 250K. The default is 500K, which applies to nearly every CAN OBDII vehicle.

OBDII

You can select from a standard list of OBDII channels on the OBDII configuration screen.

Selecting sample rates

For channels that require a faster response rate, like RPM and TPS, we recommend 10, 25 or 50Hz. More slowly changing channels like EngineTemperature should be set to 1 or 5Hz.

• Note about unsupported channels: - If your ECU does not support a channel, the value will remain at 0. RaceCapture will time-out waiting for a response from the ECU, which will affect the performance of other channels. We recommend removing all unsupported channels to ensure optimal OBDII performance.

Wireless

You can configure RaceCapture simultaneously for both Access Point and Client mode.

Client Mode

To enable client mode, specify the SSID and password for the network you wish to connect to and turn the client mode switch to on

Access Point Mode

To enable the RaceCapture access point, specify the SSID and a password.

• Note: If specified, passwords must be minimum of 8 characters. Leave the field blank to create an open network.

Telemetry

To enable real-time telemetry, enter the device ID provided by your [Podium account]

• Note: You will also need to enable telemetry in the top level application preferences. When telemetry is broadcasting, you will see a green cloud icon in the application toolbar.

Logs

To view the log messages provided by the RaceCapture unit, you can enable the Poll log check box. You can copy the current log to the clipboard by pressing the Copy button.

• Note: These logs are useful for diagnosing issues with your RaceCapture unit.

Applying Decals

Install the RaceCapture, Podium and Autosport Labs decals on your car in prominent locations!