User talk:Polleke

Revision as of 17:41, 13 November 2007 by Polleke (talk | contribs)

I'm building a Edis Megajolt test bench for a shool project in Belgium

pictures of realisation


this is a picture of the complete test bench http://www.autosportlabs.net/Image:Test_bench.JPG


this is the picture that i took off the speed regulator out of my dads drill. http://www.autosportlabs.net/Image:Speed_regulator.JPG


this is the picture of the toothed wheel and VR sensor. http://www.autosportlabs.net/Image:Sensor1.JPG


this is the coil + sparkplugs http://www.autosportlabs.net/Image:Spark_plugs2.JPG


extra safety


these are the extra safety measurements for the angle grinder. http://www.autosportlabs.net/Image:Thoothed_wheel_extra_safety.JPG