View source for Honda B Series Guide

=Honda vehicles with B Series engines=
[[Image:Honda_civic_race_car.jpg|500px]]

==RPM==
Use ECU Pin A13
* RaceCapture/Pro Settings:
** Timer Mode: RPM
** Pulse per revolution: 2
** Timer Speed: Medium

==Fuel Level==
Fuel Level - Yel/Blk wire. This wire runs from the fuel level sending unit to the gauge cluster. 

* If not using the gauge cluster 
Disconnect the wire from the gauge cluster. You need to use a 47ohm pull-up resistor. The voltage range is 0.45 (full)- 3.5v (empty).

* Channel settings
** Sample Rate - 1hz
** Smoothing - Max
** Mapped 
** 0.45 - 100%
** 3.5 - 0%

==Oil Pressure==
Recommend a dedicated 10 bar / 145 PSI 0.5-4.5v pressure sensor. [https://www.autosportlabs.com/product/10-bar-145-psi-fluid-pressure-sensor/ Pressure Sensor]