View source for V3.2.x / 2.8.x Feature summary

New features and enhancements for this version:

*Dual Ignition configuration support, hardware switchable (via 'option port') at runtime.
*Full TPS / Alternate MAP sensor calibration support. After calibration, the TPS value will measure actual throttle opening percentage. External MAP sensors will also be possible.
*Hysteresis on all configurable outputs.
*Cranking RPM will default to ignition cell (0,0). This is special behaviour for those that need a specific ignition advance while cranking.
*Enhanced runtime state reporting: User output states & active configuration information is made available for display by the PC configuration software.
*Improvements to interactive tuning- a new controller command allows for more responsive behaviour while tuning a running engine.
*Firmware version number reporting.


<center>
[[Image:mjljConfigV3.1.0_tuning_screenshot.png]]<br>
''V3.1.0 Configurator screenshot''
</center>


<center>
[[Image:mjljConfigV3.1.0_loadCalDialog.png]]<br>
''TPS calibration window''
</center>