IgnitionDrivers

Ignition Driver boards

Jolt4 Ignition Driver

The Jolt4 Ignition Driver board groups together 4 Ignition drive transistors such as the Bosch BIP373 , Fairchild ISL9V3040S3ST and so on.

Jolt4 brd.png

Jolt4 sch.png

Features

  • Up to 4 ignition drivers supported
  • 10 pin molex connector for ease of use
  • LEDs indicating driver activity (requires additional drive current of 3-6ma)
  • Heat-sinking from bottom of PC board- transistors are soldered down
  • 2.48 x 3.14" board sized to fit our compact aluminum enclosure (or other enclosure accepting 2.5" width PC Boards)
  • Metric sizing for board is 63mm x 80mm

Connector Pinout

Jolt4 pinout.png

License

This design is released under the Autosport Labs Creative Commons license

Downloads

Revision A Hardware

Retrieved from "https://wiki.autosportlabs.com/index.php?title=IgnitionDrivers&oldid=1459"