Revision as of 22:56, 29 March 2016 by Brentp (talk | contribs) (Created page with "=SensorX board= Image:sensorX_board.png SensorX is a breakout board that provides multiple ground and 5v reference signals for up to 7 sensors, including spots for pull-...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

SensorX board

SensorX is a breakout board that provides multiple ground and 5v reference signals for up to 7 sensors, including spots for pull-up resistors for passive, two wire temperature sensors. It's specifically designed to be bundled in-line with your wiring harness and covered in heat-shrink tubing when fully assembled.

Wiring sensors

Wire

Retrieved from "https://wiki.autosportlabs.com/index.php?title=SensorX&oldid=6509"

This page was last edited on 29 March 2016, at 22:56.