MegaJolt Lite Jr.: Difference between revisions

m (→‎Version 3.x: added operation guide for V3)
(revamped project information page)
Line 2: Line 2:
[[Image:mjlj_logo.png|500px]]
[[Image:mjlj_logo.png|500px]]
</center>
</center>
The Megajolt Lite Jr. (MJLJ) is a fully configurable, stand-alone ignition controller designed to control a Ford EDIS 4, 6 or 8 crank-fired ignition module. The result is a precision, digitally controlled distributorless ignition system.  
The Megajolt Lite Jr. (MJLJ) is a fully programmable, stand-alone ignition controller designed to control a Ford EDIS 4, 6 or 8 crank-fired ignition module. The result is a precision, digitally controlled distributorless ignition system.  


The MJLJ is an ideal ignition solution for carburated engines; it can also work in conjunction with compatible EFI systems.
The MJLJ is an ideal ignition solution for carburated engines; it can also work in conjunction with compatible EFI systems.


[[Image:mjljV3_MAP_prebuilt.jpg|400px|right]]
[[Image:Mjlj_v4_molex_end.jpg|right]]


==Features==
==Features==
===Current Features===
===V4 Current Features===
*10 x 10 ignition map, with full linear interpolation between values
*10 x 10 ignition map, with full linear interpolation between values
*Load axis calibrated by on-board Manifold Pressure (MAP) sensor or external Throttle Position Sensor (TPS)
*Load axis calibrated by on-board Manifold Pressure (MAP) sensor or external Throttle Position Sensor (TPS)
*Analog auxiliary input to further correct ignition map
*Four user-defined output switches, which trigger on RPM or load
*Four user-defined output switches, which trigger on RPM or load
*'Shift light' output- for driving a dash-mounted shift light
*'Shift light' output- for driving a dash-mounted shift light
*External Rev-Limit trigger output (The Ford EDIS module has no 'rev limit' signal, so an external circuit to disable the ignition coil is required)
*External Rev-Limit trigger output (The Ford EDIS module has no 'rev limit' signal, so an external circuit to disable the ignition coil is required)
*Modern, easy to use, and customizable Windows-based [[MJLJ_Configuration_Software|configuration software]]
*Modern, easy to use, and customizable Windows-based Configuration/Tuning software [[MegaJolt_Lite_Jr.#Software Screenshots|Screenshots]]
 
*Dual, on-the-fly switchable ignition configuration
*Fine-tune crank sensor position
*Configurable cranking RPM advance
**Load, modify and save Ignition Configuration
**Load, modify and save Ignition Configuration
**View, log and interact with engine runtime data
**View, log and interact with engine runtime data
**Interactively visualize and tune ignition map
**Interactively visualize and tune ignition map


===New with V2.8.x/V3.2.0===
==Software Screenshots==
*'''Dual, on-the-fly switchable ignition configuration'''
===Main Screen===
*TPS / Load axis calibration
The main screen displays runtime data at a glance plus allows editing of the primary ignition map.
*Improved user outputs with hysteresis
<br>
*Configurable cranking RPM advance
[[Image:Mjlj_v4_main_screenshot_connected.png]]
 
===Interactive Tuning Window===
You can interactively tune the engine while running using the intuitive 3D tuning view.
<br>
[[Image:Mjlj_v4_operation_guide_tuning_view.png]]
 
===Advance Correction===
The Auxiliary input channel allows for further correction of ignition advance. A typical use is to correct advance based on engine temperature, through the use of a temperature sensor, or react from a 0-5V signal provided by an external system.
<br>
[[Image:Mjlj_v4_advance_correction.png]]
 
===Datalogging View===
You can observe runtime data plotted against time, as well as save data to a log file for later viewing and analysis.
<br>
[[Image:Mjlj_v4_operation_guide_open_datalog.png]]
 


==General Information and Downloads ==
==General Information and Downloads ==

Revision as of 19:42, 10 August 2008

Mjlj logo.png

The Megajolt Lite Jr. (MJLJ) is a fully programmable, stand-alone ignition controller designed to control a Ford EDIS 4, 6 or 8 crank-fired ignition module. The result is a precision, digitally controlled distributorless ignition system.

The MJLJ is an ideal ignition solution for carburated engines; it can also work in conjunction with compatible EFI systems.

Mjlj v4 molex end.jpg

Features

V4 Current Features

  • 10 x 10 ignition map, with full linear interpolation between values
  • Load axis calibrated by on-board Manifold Pressure (MAP) sensor or external Throttle Position Sensor (TPS)
  • Analog auxiliary input to further correct ignition map
  • Four user-defined output switches, which trigger on RPM or load
  • 'Shift light' output- for driving a dash-mounted shift light
  • External Rev-Limit trigger output (The Ford EDIS module has no 'rev limit' signal, so an external circuit to disable the ignition coil is required)
  • Modern, easy to use, and customizable Windows-based Configuration/Tuning software Screenshots
  • Dual, on-the-fly switchable ignition configuration
  • Fine-tune crank sensor position
  • Configurable cranking RPM advance
    • Load, modify and save Ignition Configuration
    • View, log and interact with engine runtime data
    • Interactively visualize and tune ignition map

Software Screenshots

Main Screen

The main screen displays runtime data at a glance plus allows editing of the primary ignition map.
Mjlj v4 main screenshot connected.png

Interactive Tuning Window

You can interactively tune the engine while running using the intuitive 3D tuning view.
Mjlj v4 operation guide tuning view.png

Advance Correction

The Auxiliary input channel allows for further correction of ignition advance. A typical use is to correct advance based on engine temperature, through the use of a temperature sensor, or react from a 0-5V signal provided by an external system.
Mjlj v4 advance correction.png

Datalogging View

You can observe runtime data plotted against time, as well as save data to a log file for later viewing and analysis.
Mjlj v4 operation guide open datalog.png


General Information and Downloads

Current Hardware

Version 4.x

Mjlj v4 preview case board perspective.jpgMjlj v4 board preview.jpgMjlj v4 preview map peeking.jpgMjlj v4 preview molex peeking.jpgMjlj v4 preview end installed.jpg

Version 3.x

MjljV3 MAP prebuilt.jpgMjlj v3 build step6 map.jpgMjlj v3 build step5 map.jpg

Older hardware revisions

Version 2.x

Mjlj v2 molex end.jpgMjlj v2 open case closeup2.jpgMjlj assembly complete.jpg

Ancient History

Mjljv1 assembled.jpgMjljv1 board.jpg