Search results
Page title matches
- 298 bytes (50 words) - 17:14, 4 February 2007
Page text matches
- map_chan(atsId, data, 6, 1, 1, 0) map_chan(ctsId, data, 7, 1, 1, 0)2 KB (170 words) - 06:01, 18 December 2016
- my firing order is 1,3,4,2, ...to 1 ,2 to 2 and so on.or should i work on the theory that the coil fires 1,2,3,4, and change the leads to correspond with my firing order.299 bytes (56 words) - 09:25, 8 April 2008
- --CAN channel to listen on. 0=first CAN channel, 1=second --1 for Big Endian (MSB) mode; 0 for Little Endian mode (LSB)2 KB (228 words) - 05:23, 27 February 2015
- ...riority is 0 - 2, with 0 = normal priority used for pit-to car alerts, and 1 - 2 reserved for future use. * Priority 1 address: 0xA102 (41218) / 0xA103 (41219)2 KB (268 words) - 01:19, 8 September 2020
File:Flashing1.png Firmware flashing 1(743 × 651 (63 KB)) - 09:03, 4 November 2023File:Performance Metrics 1.gif Performance Metrics 1(600 × 369 (1.33 MB)) - 20:07, 21 January 2024- CAN_chan = 0 -- 0=first CAN channel, 1=second map_chan(rpmId, data, 0, 2, 1, 0)3 KB (308 words) - 01:47, 31 July 2015
- ==Approach #1==575 bytes (102 words) - 14:16, 23 May 2023
- ...shift light is by using the PWM / Analog output channels to trigger a 3 + 1 shift light output. In this case, we used 3 of the outputs to control the 3 * Shift light boards connected to PWM / Analog out 1 - 3; flash alert LED to the 4th output2 KB (283 words) - 19:48, 19 December 2014
- * Bytes: 1,2 (little endian) * Precision: 0.12 KB (216 words) - 21:28, 28 February 2015
- ...nds, using the Unix time epoch of 1/1/1970 (number of milliseconds since 1/1/1970) "Interval"|"ms"|0|0|1,"Utc"|"ms"|0|0|1,"Battery"|"Volts"|0.0|50.0|1,"AccelX"|"G"|0.0|0.0|25,"AccelY"|"G"|0.0|0.0|25,"AccelZ"|"G"|0.0|0.0|25,"Ya3 KB (362 words) - 20:04, 10 December 2023
- ...CAN Low to the corresponding CAN High / CAN Low on the RaceCapture/Pro CAN 1 channel. See the [CAN_Bus_Integration|CAN integration guide]] for wiring de --CAN channel to listen on. 0=first CAN channel, 1=second5 KB (554 words) - 04:51, 21 July 2016
- |1 |15 KB (585 words) - 03:34, 16 July 2015
- ** Find one that uses an 1/8" jack to plug into a conventional microphone connection. ''Do not use a U * '''1/4" stereo phono plug'''4 KB (625 words) - 06:44, 15 August 2012
- ...e="text-align: center; background: transparent; margin-left: 10%;" border="1" |1.0||16289 bytes (28 words) - 07:28, 23 July 2010
- *'''Cluster 1:''' Connect A1 to ground User outputs 1-4 + shift light output can be used to control the sequential shift light.2 KB (294 words) - 07:08, 26 June 2008
- CAN_chan = 0 --CAN channel to listen to 0=first CAN channel, 1=second be_mode = 1 --1 for Big Endian (MSB) mode; 0 for Little Endian mode (LSB)7 KB (799 words) - 16:39, 8 November 2016
- addAnalog(1,'Batt', 10, 2, 0, 5, 'V', 1, 0) addFreq(5, 'RPM', 10, 0, 0, 10000, '', 60, 1)4 KB (517 words) - 16:32, 8 May 2018
- *Processor (Pin 1 GND, Pin 16 +5v) *MAP sensor ( pin 2 is GND, pin 3 is +5v. "dot" is next to pin 1 on solder side)2 KB (372 words) - 00:38, 4 February 2007
- ...dforums.net/showthread.php?607-Autosport-Labs-RaceCapture&p=50287&viewfull=1#post50287 this thread] for extensive information and discussion on the EvoX chBoost = addChannel("Boost", 100, 1, -14.5, 43.5, "PSI")5 KB (660 words) - 22:45, 27 October 2017