If the crank pulley has extra material to machine the necessary 36-1 pattern, identical results can be obtained compared to the 'traditional' te
The following image is an aftermarket VW pulley, modified with the 36-1 pattern using round holes realize the trigger wheel pattern.
4 KB (551 words) - 07:01, 23 July 2010
* Pin 1 = Power in (+8V to +24V), 40mA
| 1
11 KB (1,618 words) - 21:38, 17 April 2015
...agnostic connector at the back of the engine compartment (black wire, Pin #1)
*1.33v = 25 (1/4)
5 KB (690 words) - 23:12, 29 June 2020
...cript shown below will output all CAN bus messages received on CAN channel 1 to the RaceCapture/Pro log window.
...onnections. Ensure you're connected to the CAN bus used in the script (CAN 1 is the default for the script).
3 KB (423 words) - 18:04, 27 February 2020
* Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.
986 bytes (145 words) - 17:38, 13 March 2015
** 1: Fix in progress
** < 1 Ideal
3 KB (544 words) - 17:25, 10 July 2024
...d protected 0-5v sensor inputs and can broadcast the sensor values between 1 and 255Hz. It also provides a 0.5A 5v reference for powering sensors.
* 1" shrink tube for installation
12 KB (1,791 words) - 17:59, 6 September 2020
===== 1) Download the Yi Action app for [https://play.google.com/store/apps/details
4 KB (601 words) - 20:10, 5 January 2021
| 1 || Analog/Digital B1 || Analog 5 || GPIO 1
| 4 || Analog/Digital A1 || Analog 1 || Timer/RPM 1
10 KB (1,576 words) - 17:30, 29 July 2024
| Frequency / RPM input 1
| Analog Input 1
9 KB (1,398 words) - 23:07, 4 April 2018
| Frequency / RPM input 1
| Analog Input 1
11 KB (1,655 words) - 21:32, 19 July 2021
{| border=1
{| border=1
10 KB (1,700 words) - 15:25, 31 March 2007
* ShiftX3 with enclosure 136 x 32 x 9.46 mm (5.35 x 1.26 x .37 inches)
for i=0,9,1 do
22 KB (3,049 words) - 04:56, 5 September 2023
==='''1) Configure your AIM channels/sensors in [http://aimsports.com/eng/download/
Mask will be always be 0 and CAN Bus should be 1.
12 KB (2,034 words) - 19:27, 5 January 2021
* RaceCapture/Pro MK2 running firmware 2.9.1 or higher
* '''Tip 1''': Touch or click the '''Poll Log''' to see the current message in the Rac
19 KB (2,852 words) - 15:22, 16 November 2022
===Analog Inputs 1-7===
* Input Impedance: 1 megaohm
11 KB (1,639 words) - 00:04, 9 August 2017
...ge '''Turn on''' CAN in RaceCapture setup and choose '''500KBPS''' for CAN 1
| CAN 1 High
5 KB (855 words) - 15:40, 10 February 2022
** Class 1 (1 W @ 1800/1900MHz)
4 KB (569 words) - 18:56, 8 June 2016
...d protected 0-5v sensor inputs and can broadcast the sensor values between 1 and 255Hz. It also provides a 0.5A 5v reference for powering sensors.
...1M || CAN + power pigtail for connecting device, M8 4P male to bare wires, 1 meter
14 KB (2,176 words) - 16:12, 17 September 2024
| 1 / 2 / 4 (factory default) / 8 / 16
| Pin 1
23 KB (3,336 words) - 15:43, 13 June 2024
