3.2.x/2.8.x firmware upgrade guide: Difference between revisions

(removed section reference)
(bumped version numbers)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
*[[V3.1.x / 2.7.x Feature summary|V3.1.0 / V2.7.0 feature summary]]
*[[V3.2.x / 2.8.x Feature summary|Feature summary]]
*[[V3.1.x / 2.7.x Backing up your current configuration|Backing up your current configuration]]
*[[V3.2.x / 2.8.x Backing up your current configuration|Backing up your current configuration]]
*[[V3.1.x / 2.7.x Downloading the MJLJ firmware|Downloading the MJLJ firmware]]
*[[V3.2.x / 2.8.x Downloading the MJLJ firmware|Downloading the MJLJ firmware]]
*[[V3.1.x / 2.7.x Installing the new firmware image|Installing the new firmware image]]
*[[V3.2.x / 2.8.x Installing the new firmware image|Installing the new firmware image]]
*[[V3.1.x / 2.7.x Installing the configuration software|Installing the configuration software]]
*[[V3.2.x / 2.8.x Installing the configuration software|Installing the configuration software]]
*[[V3.1.x / 2.7.x New Feature: Calibrate TPS / Load Axis Calibration|New Feature: Calibrate TPS / Load Axis Calibration]]
*[[V3.2.x / 2.8.x New Feature: Calibrate TPS / Load Axis Calibration|New Feature: Calibrate TPS / Load Axis Calibration]]
*[[V3.1.x / 2.7.x New Feature: Dual on-the-fly switchable Ignition Configuration|New Feature: Dual on-the-fly switchable Ignition Configuration]]
*[[V3.2.x / 2.8.x New Feature: Dual on-the-fly switchable Ignition Configuration|New Feature: Dual on-the-fly switchable Ignition Configuration]]

Latest revision as of 00:59, 22 April 2007