RaceCapture-Pro MK2
RaceCapture/Pro Quick Links
Getting Started
User Guides
- CAN bus / ECU integration guide
- Hardware installation and operation guide
- 3.5G Module Upgrade guide
- RaceCapture App User's guide
- Sensor guide
- Lua scripting guide
Accessory / add-on guides
- SensorX sensor breakout board assembly guide
- CoilX Tach interface to ignition coils guide
- WiFi module for automatic GoPro control guide
How To
- How to: enable Predictive Timing
- How to: enable OBD2 channels
- How to: calibrate and configure an analog sensor
- How to: sequential shift lights
- How to: get best GPS data
- How to: submit a new race track
- How to: analyze your data
- How to: Analyze data in Podium to become a faster driver
- How to: Add TPMS Data
- More FAQs and How-To's
By Car
By Sensor Type
Reference
More Information
Previous Hardware Versions
Quick Reference
Download a printable PDF
RaceCapture/Pro MK2 Specifications
| Input / Output Channels | |
|---|---|
| Analog Inputs | |
| Channels | 8 (battery voltage dedicated on channel 8) |
| Voltage range | 0-5v |
| Input impedance | 1M ohm |
| Voltage protection | 400v (intermittent) |
| ADC precision | 12 bit |
| Maximum sample rate | 1000Hz |
| Mapping | Raw / Linear formula / Interpolated map |
| Digital I/O | |
| Channels | 3 |
| Output mode type | Open drain |
| Output current capacity | 1A, inductive clamped |
| Input mode voltage range | 0-12v |
| Input voltage protection | 400v (intermittent) |
| Maximum sample rate | 1000Hz |
| Timer Inputs (RPM / Frequency) | |
| Channels | 3 |
| Input voltage protection | 400v (intermittent) |
| Maximum sample rate | 1000Hz |
| PWM/Analog outputs | |
| Channels | 4 |
| PWM output type | push/pull |
| PWM output voltage range | 5v |
| Output current capacity | 50mA |
| Analog Output | 0-5v |
| Voltage Reference | |
| Output Voltage/Capacity | 5v / 1A |
| Connectivity | |
| CAN Bus | |
| CAN Channels | 2 |
| CAN baud rate | 125K, 250K, 500K, 1M baud |
| CAN Termination | 120 ohms terminated, both channels |
| CAN filters | 14 per channel |
| Protocol support | OBDII PID (CAN 1), custom CAN messaging |
| Telemetry/Wireless | |
| Cellular (North America) | 3.5G GSM 850/1900MHz (internal module, optional) |
| Cellular (Worldwide) | 2.5G Quad-band GSM (internal module, optional) |
| Bluetooth | Bluetooth 2.0 (external module, optional) |
| Aux Serial | Type External RJ11 / RS232 signaling |
| Max Baud Rate | 230400 |
| Inertial Motion Unit | |
| Accelerometer Channels | 3 (X/Y/Z) (2G, 4G capable) |
| Gyro | 3 (Yaw/Pitch/Roll) (1000 degrees/sec) |
| GPS Type | External active antenna |
| GPS Maximum sample rate | 50Hz |
| GPS accuracy | 2.5M CEP |
| Storage | |
| Micro SD | Up to 32GB (SDHC) FAT32 |
| Configuration Capacity | |
| Auto-detect track database | 240 |
| Sectors per track | 20 |
| Channel support | 200 |
| Physical | |
| Dimensions | 5.3" (width) x 4.2" (height) x 1.2" (tall) / 135x110x31 mm(est) |
| Mounting area | 5.5"(140mm) x 4"(102mm) |
| Mounting holes | Dual mounting points on 5" (127mm) centers - 0.125"-0.25" (3-6mm) fastener |
| Weight | 9oz / 255gm (est) |
| Power connection | Terminal block: 1A max RJ45: 1A max |
| Power Consumption (max) | Main System: 0.6W With Bluetooth: 1.6W With Cellular Telemetry: 8.6W With Cellular Telemetry and Bluetooth: 9.6W |
| Temperature | Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module) |
