RaceCapture-Pro MK2: Difference between revisions

No edit summary
 
(117 intermediate revisions by 5 users not shown)
Line 1: Line 1:
__NOTOC__==Introduction==
=RaceCapture/Pro Quick Links=
'''Autosport Labs RaceCapture is a powerful, multi-channel Data Acquisition and Control system for motorsport applications, presented at a break-through price.'''
* [[Image:add_to_cart.png|link=https://www.autosportlabs.com/racecapture_mk3_apex/]]


==Impact==
==Getting Started==
RaceCapture transcends most traditional "Data Logging" systems by virtue of its powerful processor and emphasis on outputs as well as inputs.  The ability to perform Data Acquisition while controlling other devices and systems, coupled with flexible end-user customization, will powerfully differentiate RaceCapture from other data logging systems.
*'''[[RaceCapturePro2_QuickStart|First time setup]]'''
*'''[[RaceCapturePro_Downloads|Software Downloads]]'''
*'''[[RaceCapturePro2_Hardware_Install|Hardware install]]'''
*'''[[RaceCapturePro2_TelemetryQuickstart|Live-streaming telemetry]]'''


==Significance==
==User Guides==
While the official application of RaceCapture is focused towards Race Car Data Acquisition, its powerful processor combined with a wealth of inputs and outputs also makes RaceCapture a general purpose automotive computer, one capable of handling many different tasks - limited only by your imagination. If the question is "Can RaceCapture do ...?" the answer will likely be 'Yes' and often with little to no external hardware support necessary.
*[[RCP_CAN|CAN bus / ECU integration guide]]
*[[RaceCapturePro2_hardware_guide|Hardware installation and operation guide]]
*[[RaceCapturePro2_3.5G_module_upgrade|3.5G Module Upgrade guide]]
*[[RaceCapture_App_User%27s_Guide|RaceCapture App User's guide]]
*[[RaceCapturePro_Sensors|Sensor guide]]
*[[RaceCapturePro_Lua_Scripting|Lua scripting guide]]


==Accessory / add-on guides ==
*[[SensorX|SensorX sensor breakout board assembly guide]]
*[[CoilX|CoilX Tach interface to ignition coils guide]]
*[[RaceCapturePro2_GoProWiFi|WiFi module for automatic GoPro control guide]]


<div style="width:100%; background-repeat: no-repeat; background-position: 0% 20%;background-color: #f0f0f0; border: 1px solid #ccc;">
==How To==
<center><font size="4" color="red">Beta testing in 2009!</font><br></center>
*[[RaceCapturePro2_Enable_Predictive_Timing|How to: enable Predictive Timing]]
If you are interested in participating in our beta test program, [mailto:[email protected]?Subject=RaceCapture%20beta%20test%20inquiry email us] with your request, including a note about your relevant background and experience, and a section explaining how you might benefit from the system- specifically, the application in which you will be using RaceCapture (i.e. Street Car, Road Race, Rally, Drag, Autocross, etc.), and any particular objective you would like to meet with the system. This information will help us qualify you as a beta-tester. Previous 'good-citizen' beta-testers will receive preferred placement.
*[[RaceCapturePro2_OBD2|How to: enable OBD2 channels]]
</div>
*[[RaceCapturePro2_Calibrate_Sensor|How to: calibrate and configure an analog sensor]]
*[[RaceCapturePro2_ShiftLights|How to: sequential shift lights]]
*[[RaceCapturePro2_GPS|How to: get best GPS data]]
*[[RaceTracks|How to: submit a new race track]]
*[[RaceCapturePro_Analysis|How to: analyze your data]]
*[[Podium_Driver_Data_Analysis|How to: Analyze data in Podium to become a faster driver]]
*[[Add_TPMS_Data|How to: Add TPMS Data]]
*[[RaceCapturePro_FAQ|More FAQs and How-To's]]


==At a Glance==
==By Car==
<center>
*[[RaceCapturePro2_vehicle_guide|Vehicle Guide]]
[[Image:RaceCapture_flyer.jpg]]
</center>


==Capabilities==
==By Sensor Type==
*[[RaceCapturePro2_RPM|RPM]]'''


<font size="3">Extreme flexibility comes with a powerful processor and a wealth of inputs and outputs. </font>
==Reference==
*[[RaceCapturePro2_logfile_reference|Log file reference]]


===Input and Output Channels===
==More Information==
RaceCapture offers 20 input and output channels, enough to handle complex logging and control tasks.
*[https://github.com/autosportlabs Source code]


* '''7 dedicated analog input channels'''
===Previous Hardware Versions===
** ''Measure sensors or process input from other devices.''
[[RaceCapturePro-MK1|RaceCapture/Pro MK1]]


* '''3 dedicated frequency input channels'''
=Quick Reference=
** ''Measure RPM, wheel speed, or any kind of periodic pulse. One channel is optically isolated for direct connection to ignition coil.''
Download a [http://www.autosportlabs.com/racecapturepro-mk2-quick-reference/racecapture-pro-mk2-quick-reference-sheet printable PDF]


* '''4 configurable analog,digital or frequency output channels'''
[[Image:RaceCapture-Pro MK2 quick reference sheet.jpg]]
** ''Control other systems or even override OEM sensors''


* '''3 configurable digital channels, settable for input or output'''
=RaceCapture/Pro MK2 Specifications=
** ''Receive input from switches; or configure as output and use to activate accessories or drive indicator lamps''


* '''Input for precision 3 channel accelerometer module (+/- 2G per axis, 3G optional)'''
{| class="wikitable" style="text-align: left"
** ''Measure and log 3D G-Force in real-time with one of the industry's most accurate and precise accelerometers.''
!colspan="2"|Input / Output Channels
 
|-
* '''GPS module input'''
!colspan="2"|'''Analog Inputs'''
** ''Add an external GPS module for course mapping''
|-
 
|Channels
* '''Auxiliary serial expansion port'''
|8 (battery voltage dedicated on channel 8)
** ''Interface to future interactive dash/display''
|-
 
|Voltage range
===Logging===
|0-5v
* '''SD Memory card slot for data acquisition'''
|-
** ''Store up to 2GB of logging data''
|Input impedance
 
|1M ohm
===Power===
|-
* '''Powerful 48MHz 32 bit ARM processor'''
|Voltage protection
** ''Power to perform high resolution logging and running complex, user-defined logic''
|400v (intermittent)
 
|-
===Mechanical===
|ADC precision
* '''Compact, rugged design with good looks'''
|12 bit
** Unit measures approximately 4 x 3 inches (100 x 82 mm)  
|-
* '''Easy to use screw terminal block for wiring'''
|Maximum sample rate
* '''On-board 'action' switch to start/stop logging (or other use)'''
|1000Hz
* '''On-board Status LEDs'''
|-
 
|Mapping
==The Intangibles==
|Raw / Linear formula / Interpolated map
===Flexibility===
|-
Unprecedented ability to customize logging and define behavior for user-outputs.  
!colspan="2"|'''Digital I/O'''
 
|-
* '''Customize logging channels and frequency'''
|Channels
* '''Control outputs based on the logic ''YOU'' define'''
|3
* '''Powerful PC software to customize, view and analyze data'''
|-
 
|Output mode type
===Infinite Possibilities===
|Open drain
* '''Far more than a data-logging system: flexible Inputs and Outputs coupled with a powerful processor offers endless customization'''
|-
* '''Share configurations, tips and ideas with our online community'''
|Output current capacity
* '''Open development process, frequent software updates and end-user customizable!'''
|1A, inductive clamped
 
|-
==Images==
|Input mode voltage range
[[Image:RaceCapture_assembled_led_3quarter_640.jpg]]
|0-12v
[[Image:RaceCapture_assembled_terminal_block_3quarter_640.jpg]]
|-
 
|Input voltage protection
==Board Connections==
|400v (intermittent)
<center>
|-
[[Image:RaceCapture_assembled_connections_640.jpg]]
|Maximum sample rate
</center>
|1000Hz
|-
!colspan="2"|'''Timer Inputs (RPM / Frequency)'''
|-
|Channels
|3
|-
|Input voltage protection
|400v (intermittent)
|-
|Maximum sample rate
|1000Hz
|-
!colspan="2"|'''PWM/Analog outputs'''
|-
|Channels
|4
|-
|PWM output type
|push/pull
|-
|PWM output voltage range
|5v
|-
|Output current capacity
|50mA
|-
|Analog Output
|0-5v
|-
!colspan="2"|Voltage Reference
|-
|Output Voltage/Capacity
|5v / 1A
|-
!colspan="2"|Connectivity
|-
!colspan="2"|'''CAN Bus'''
|-
|CAN Channels
|2
|-
|CAN baud rate
|125K, 250K, 500K, 1M baud
|-
|CAN Termination
|120 ohms terminated, both channels
|-
|CAN filters
|14 per channel
|-
|Protocol support
|OBDII PID (CAN 1), custom CAN messaging
|-
!colspan="2"|'''Telemetry/Wireless'''
|-
|Cellular (North America)
|3.5G GSM 850/1900MHz (internal module, optional)
|-
|Cellular (Worldwide)
|2.5G Quad-band GSM (internal module, optional)
|-
|Bluetooth
|Bluetooth 2.0 (external module, optional)
|-
|Aux Serial
|Type External RJ11 / RS232 signaling
|-
|Max Baud Rate
|230400
|-
!colspan="2"|Inertial Motion Unit
|-
|Accelerometer Channels
|3 (X/Y/Z) (2G, 4G capable)
|-
|Gyro
|3 (Yaw/Pitch/Roll) (1000 degrees/sec)
|-
|GPS Type
|External active antenna
|-
|GPS Maximum sample rate
|50Hz
|-
|GPS accuracy
|2.5M CEP
|-
!colspan="2"|Storage
|-
|Micro SD
|Up to 32GB (SDHC) FAT32
|-
!colspan="2"|Configuration Capacity
|-
|Auto-detect track database
|240
|-
|Sectors per track
|20
|-
|Channel support
|200
|-
!colspan="2"|Physical
|-
|Dimensions
|5.3" (width) x 4.2" (height) x 1.2" (tall) / 135x110x31 mm(est)
|-
|Mounting area
|5.5"(140mm) x 4"(102mm)
|-
|Mounting holes
|Dual mounting points on 5" (127mm) centers - 0.125"-0.25" (3-6mm) fastener
|-
|Weight
|9oz / 255gm (est)
|-
|Power connection
|Terminal block: 1A max<br/>RJ45: 1A max
|-
|Power Consumption (max)
|Main System: 0.6W<br/>With Bluetooth: 1.6W<br/>With Cellular Telemetry: 8.6W<br/>With Cellular Telemetry and Bluetooth: 9.6W
|-
|Temperature
| Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module)
|}

Latest revision as of 19:12, 31 March 2019

RaceCapture/Pro Quick Links

  • Add to cart.png

Getting Started

User Guides

Accessory / add-on guides

How To

By Car

By Sensor Type

Reference

More Information

Previous Hardware Versions

RaceCapture/Pro MK1

Quick Reference

Download a printable PDF

RaceCapture-Pro MK2 quick reference sheet.jpg

RaceCapture/Pro MK2 Specifications

Input / Output Channels
Analog Inputs
Channels 8 (battery voltage dedicated on channel 8)
Voltage range 0-5v
Input impedance 1M ohm
Voltage protection 400v (intermittent)
ADC precision 12 bit
Maximum sample rate 1000Hz
Mapping Raw / Linear formula / Interpolated map
Digital I/O
Channels 3
Output mode type Open drain
Output current capacity 1A, inductive clamped
Input mode voltage range 0-12v
Input voltage protection 400v (intermittent)
Maximum sample rate 1000Hz
Timer Inputs (RPM / Frequency)
Channels 3
Input voltage protection 400v (intermittent)
Maximum sample rate 1000Hz
PWM/Analog outputs
Channels 4
PWM output type push/pull
PWM output voltage range 5v
Output current capacity 50mA
Analog Output 0-5v
Voltage Reference
Output Voltage/Capacity 5v / 1A
Connectivity
CAN Bus
CAN Channels 2
CAN baud rate 125K, 250K, 500K, 1M baud
CAN Termination 120 ohms terminated, both channels
CAN filters 14 per channel
Protocol support OBDII PID (CAN 1), custom CAN messaging
Telemetry/Wireless
Cellular (North America) 3.5G GSM 850/1900MHz (internal module, optional)
Cellular (Worldwide) 2.5G Quad-band GSM (internal module, optional)
Bluetooth Bluetooth 2.0 (external module, optional)
Aux Serial Type External RJ11 / RS232 signaling
Max Baud Rate 230400
Inertial Motion Unit
Accelerometer Channels 3 (X/Y/Z) (2G, 4G capable)
Gyro 3 (Yaw/Pitch/Roll) (1000 degrees/sec)
GPS Type External active antenna
GPS Maximum sample rate 50Hz
GPS accuracy 2.5M CEP
Storage
Micro SD Up to 32GB (SDHC) FAT32
Configuration Capacity
Auto-detect track database 240
Sectors per track 20
Channel support 200
Physical
Dimensions 5.3" (width) x 4.2" (height) x 1.2" (tall) / 135x110x31 mm(est)
Mounting area 5.5"(140mm) x 4"(102mm)
Mounting holes Dual mounting points on 5" (127mm) centers - 0.125"-0.25" (3-6mm) fastener
Weight 9oz / 255gm (est)
Power connection Terminal block: 1A max
RJ45: 1A max
Power Consumption (max) Main System: 0.6W
With Bluetooth: 1.6W
With Cellular Telemetry: 8.6W
With Cellular Telemetry and Bluetooth: 9.6W
Temperature Max Internal Temperature while operating: -40°C ~ 85°C / -40°C ~ 80°C (Telemetry module)